W3cubDocs

/Ansible 2.10

community.network.pn_port_config – CLI command to modify port-config

Note

This plugin is part of the community.network collection.

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.pn_port_config.

Synopsis

  • This module can be used to modify a port configuration.

Parameters

Parameter Choices/Defaults Comments
pn_allowed_tpid
string
    Choices:
  • vlan
  • q-in-q
  • q-in-q-old
Allowed TPID in addition to 0x8100 on Vlan header.
pn_autoneg
boolean
    Choices:
  • no
  • yes
physical port autonegotiation.
pn_cliswitch
string
Target switch to run the CLI on.
pn_crc_check_enable
boolean
    Choices:
  • no
  • yes
CRC check on ingress and rewrite on egress.
pn_defer_bringup
boolean
    Choices:
  • no
  • yes
defer port bringup.
pn_description
string
physical port description.
pn_dscp_map
string
DSCP map name to enable on port.
pn_edge_switch
boolean
    Choices:
  • no
  • yes
physical port edge switch.
pn_egress_rate_limit
string
max egress port data rate limit.
pn_enable
boolean
    Choices:
  • no
  • yes
physical port enable.
pn_eth_mode
string
    Choices:
  • 1000base-x
  • sgmii
  • disabled
  • GMII
physical Ethernet mode.
pn_fabric_guard
boolean
    Choices:
  • no
  • yes
Fabric guard configuration.
pn_host_enable
boolean
    Choices:
  • no
  • yes
Host facing port control setting.
pn_intf
string
physical interface.
pn_jumbo
boolean
    Choices:
  • no
  • yes
jumbo frames on physical port.
pn_lacp_priority
string
LACP priority from 1 to 65535.
pn_local_switching
boolean
    Choices:
  • no
  • yes
no-local-switching port cannot bridge traffic to another no-local-switching port.
pn_loop_vlans
string
looping vlans.
pn_loopback
boolean
    Choices:
  • no
  • yes
physical port loopback.
pn_mirror_only
boolean
    Choices:
  • no
  • yes
physical port mirror only.
pn_pause
boolean
    Choices:
  • no
  • yes
physical port pause.
pn_port
string
physical port.
pn_port_mac_address
string
physical port MAC Address.
pn_reflect
boolean
    Choices:
  • no
  • yes
physical port reflection.
pn_routing
boolean
    Choices:
  • no
  • yes
routing.
pn_send_port
string
send port.
pn_speed
string
    Choices:
  • disable
  • 10m
  • 100m
  • 1g
  • 2.5g
  • 10g
  • 25g
  • 40g
  • 50g
  • 100g
physical port speed.
pn_vxlan_termination
boolean
    Choices:
  • no
  • yes
physical port vxlan termination setting.
state
string / required
    Choices:
  • update
State the action to perform. Use update to modify the port-config.

Examples

- name: Port config modify
  community.network.pn_port_config:
    pn_cliswitch: "sw01"
    state: "update"
    pn_port: "all"
    pn_dscp_map: "foo"

- name: Port config modify
  community.network.pn_port_config:
    pn_cliswitch: "sw01"
    state: "update"
    pn_port: "all"
    pn_host_enable: true

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
changed
boolean
always
indicates whether the CLI caused changes on the target.
command
string
always
the CLI command run on the target node.
stderr
list / elements=string
on error
set of error responses from the port-config command.
stdout
list / elements=string
always
set of responses from the port-config command.


Authors

  • Pluribus Networks (@rajaspachipulusu17)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/community/network/pn_port_config_module.html