W3cubDocs

/Ansible 2.10

community.network.slxos_l3_interface – Manage L3 interfaces on Extreme Networks SLX-OS network devices.

Note

This plugin is part of the community.network collection.

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.slxos_l3_interface.

Synopsis

  • This module provides declarative management of L3 interfaces on slxos network devices.

Parameters

Parameter Choices/Defaults Comments
aggregate
string
List of L3 interfaces definitions. Each of the entry in aggregate list should define name of interface name and a optional ipv4 or ipv6 address.
ipv4
string
IPv4 address to be set for the L3 interface mentioned in name option. The address format is <ipv4 address>/<mask>, the mask is number in range 0-32 eg. 192.168.0.1/24
ipv6
string
IPv6 address to be set for the L3 interface mentioned in name option. The address format is <ipv6 address>/<mask>, the mask is number in range 0-128 eg. fd5d:12c9:2201:1::1/64
name
string
Name of the L3 interface to be configured eg. Ethernet 0/2
state
string
    Choices:
  • present ←
  • absent
State of the L3 interface configuration. It indicates if the configuration should be present or absent on remote device.

Notes

Note

  • Tested against slxos 15.2

Examples

- name: Remove Ethernet 0/3 IPv4 and IPv6 address
  community.network.slxos_l3_interface:
    name: Ethernet 0/3
    state: absent

- name: Set Ethernet 0/3 IPv4 address
  community.network.slxos_l3_interface:
    name: Ethernet 0/3
    ipv4: 192.168.0.1/24

- name: Set Ethernet 0/3 IPv6 address
  community.network.slxos_l3_interface:
    name: Ethernet 0/3
    ipv6: "fd5d:12c9:2201:1::1/64"

- name: Set IP addresses on aggregate
  community.network.slxos_l3_interface:
    aggregate:
      - { name: Ethernet 0/3, ipv4: 192.168.2.10/24 }
      - { name: Ethernet 0/3, ipv4: 192.168.3.10/24, ipv6: "fd5d:12c9:2201:1::1/64" }

- name: Remove IP addresses on aggregate
  community.network.slxos_l3_interface:
    aggregate:
      - { name: Ethernet 0/3, ipv4: 192.168.2.10/24 }
      - { name: Ethernet 0/3, ipv4: 192.168.3.10/24, ipv6: "fd5d:12c9:2201:1::1/64" }
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list / elements=string
always, except for the platforms that use Netconf transport to manage the device.
The list of configuration mode commands to send to the device

Sample:
['interface Ethernet 0/2', 'ip address 192.168.0.1/24', 'ipv6 address fd5d:12c9:2201:1::1/64']


Authors

  • Matthew Stone (@bigmstone)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/community/network/slxos_l3_interface_module.html