W3cubDocs

/Ansible 2.10

community.vmware.vmware_dvswitch – Create or remove a Distributed Switch

Note

This plugin is part of the community.vmware collection.

To install it use: ansible-galaxy collection install community.vmware.

To use it in a playbook, specify: community.vmware.vmware_dvswitch.

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis

This module can be used to create, remove a Distributed Switch.

Requirements

The below requirements are needed on the host that executes this module.

python >= 2.6
PyVmomi

Parameters

Parameter		Choices/Defaults	Comments
contact dictionary			Dictionary which configures administrator contact name and description for the Distributed Switch.
	description string		Description or other details.
	name string		Administrator name.
datacenter_name string			The name of the datacenter that will contain the Distributed Switch. This parameter is optional, if `folder` is provided. Mutually exclusive with `folder` parameter. aliases: datacenter
description string			Description of the Distributed Switch.
discovery_operation string		Choices: both advertise listen ←	Select the discovery operation. Required parameter for `state` both `present` and `absent`, before Ansible 2.6 version. Required only if `state` is set to `present`, for Ansible 2.6 and onwards.
discovery_proto string		Choices: cdp ← lldp disabled	Link discovery protocol between Cisco and Link Layer discovery. Required parameter for `state` both `present` and `absent`, before Ansible 2.6 version. Required only if `state` is set to `present`, for Ansible 2.6 and onwards. `cdp`: Use Cisco Discovery Protocol (CDP). `lldp`: Use Link Layer Discovery Protocol (LLDP). `disabled`: Do not use a discovery protocol. aliases: discovery_protocol
folder string			Destination folder, absolute path to place dvswitch in. The folder should include the datacenter. This parameter is case sensitive. This parameter is optional, if `datacenter` is provided. Examples: folder: /datacenter1/network folder: datacenter1/network folder: /datacenter1/network/folder1 folder: datacenter1/network/folder1 folder: /folder1/datacenter1/network folder: folder1/datacenter1/network folder: /folder1/datacenter1/network/folder2
health_check dictionary		Default: {"teaming_failover": false, "teaming_failover_interval": 0, "vlan_mtu": false, "vlan_mtu_interval": 0}	Dictionary which configures Health Check for the Distributed Switch.
	teaming_failover boolean	Choices: no ← yes	Teaming and failover health check.
	teaming_failover_interval integer	Default: 0	Teaming and failover health check interval (minutes). The default value is 1 in the vSphere Client if the Teaming and failover health check is enabled.
	vlan_mtu boolean	Choices: no ← yes	VLAN and MTU health check.
	vlan_mtu_interval integer	Default: 0	VLAN and MTU health check interval (minutes). The default value is 1 in the vSphere Client if the VLAN and MTU health check is enabled.
hostname string			The hostname or IP address of the vSphere vCenter or ESXi server. If the value is not specified in the task, the value of environment variable `VMWARE_HOST` will be used instead. Environment variable support added in Ansible 2.6.
mtu integer		Default: 1500	The switch maximum transmission unit. Required parameter for `state` both `present` and `absent`, before Ansible 2.6 version. Required only if `state` is set to `present`, for Ansible 2.6 and onwards. Accepts value between 1280 to 9000 (both inclusive).
multicast_filtering_mode string		Choices: basic ← snooping	The multicast filtering mode. `basic` mode: multicast traffic for virtual machines is forwarded according to the destination MAC address of the multicast group. `snooping` mode: the Distributed Switch provides IGMP and MLD snooping according to RFC 4541.
password string			The password of the vSphere vCenter or ESXi server. If the value is not specified in the task, the value of environment variable `VMWARE_PASSWORD` will be used instead. Environment variable support added in Ansible 2.6. aliases: pass, pwd
port integer		Default: 443	The port number of the vSphere vCenter or ESXi server. If the value is not specified in the task, the value of environment variable `VMWARE_PORT` will be used instead. Environment variable support added in Ansible 2.6.
proxy_host string			Address of a proxy that will receive all HTTPS requests and relay them. The format is a hostname or a IP. If the value is not specified in the task, the value of environment variable `VMWARE_PROXY_HOST` will be used instead. This feature depends on a version of pyvmomi greater than v6.7.1.2018.12
proxy_port integer			Port of the HTTP proxy that will receive all HTTPS requests and relay them. If the value is not specified in the task, the value of environment variable `VMWARE_PROXY_PORT` will be used instead.
state string		Choices: present ← absent	If set to `present` and the Distributed Switch does not exist, the Distributed Switch will be created. If set to `absent` and the Distributed Switch exists, the Distributed Switch will be deleted.
switch_name string / required			The name of the distribute vSwitch to create or remove. aliases: switch, dvswitch
switch_version string		Choices: 5.0.0 5.1.0 5.5.0 6.0.0 6.5.0 6.6.0	The version of the Distributed Switch to create. Can be 6.0.0, 5.5.0, 5.1.0, 5.0.0 with a vCenter running vSphere 6.0 and 6.5. Can be 6.6.0, 6.5.0, 6.0.0 with a vCenter running vSphere 6.7. The version must match the version of the ESXi hosts you want to connect. The version of the vCenter server is used if not specified. Required only if `state` is set to `present`. aliases: version
uplink_prefix string		Default: "Uplink "	The prefix used for the naming of the uplinks. Only valid if the Distributed Switch will be created. Not used if the Distributed Switch is already present. Uplinks are created as Uplink 1, Uplink 2, etc. pp. by default.
uplink_quantity integer			Quantity of uplink per ESXi host added to the Distributed Switch. The uplink quantity can be increased or decreased, but a decrease will only be successfull if the uplink isn't used by a portgroup. Required parameter for `state` both `present` and `absent`, before Ansible 2.6 version. Required only if `state` is set to `present`, for Ansible 2.6 and onwards.
username string			The username of the vSphere vCenter or ESXi server. If the value is not specified in the task, the value of environment variable `VMWARE_USER` will be used instead. Environment variable support added in Ansible 2.6. aliases: admin, user
validate_certs boolean		Choices: no yes ←	Allows connection when SSL certificates are not valid. Set to `false` when certificates are not trusted. If the value is not specified in the task, the value of environment variable `VMWARE_VALIDATE_CERTS` will be used instead. Environment variable support added in Ansible 2.6. If set to `yes`, please make sure Python >= 2.7.9 is installed on the given machine.

Notes

Note

Tested on vSphere 6.5 and 6.7

Examples

- name: Create dvSwitch
  community.vmware.vmware_dvswitch:
    hostname: '{{ vcenter_hostname }}'
    username: '{{ vcenter_username }}'
    password: '{{ vcenter_password }}'
    datacenter: '{{ datacenter }}'
    switch: dvSwitch
    version: 6.0.0
    mtu: 9000
    uplink_quantity: 2
    discovery_protocol: lldp
    discovery_operation: both
    state: present
  delegate_to: localhost

- name: Create dvSwitch with all options
  community.vmware.vmware_dvswitch:
    hostname: '{{ vcenter_hostname }}'
    username: '{{ vcenter_username }}'
    password: '{{ vcenter_password }}'
    datacenter: '{{ datacenter }}'
    switch: dvSwitch
    version: 6.5.0
    mtu: 9000
    uplink_quantity: 2
    uplink_prefix: 'Uplink_'
    discovery_protocol: cdp
    discovery_operation: both
    multicast_filtering_mode: snooping
    health_check:
      vlan_mtu: true
      vlan_mtu_interval: 1
      teaming_failover: true
      teaming_failover_interval: 1
    state: present
  delegate_to: localhost

- name: Delete dvSwitch
  community.vmware.vmware_dvswitch:
    hostname: '{{ vcenter_hostname }}'
    username: '{{ vcenter_username }}'
    password: '{{ vcenter_password }}'
    datacenter: '{{ datacenter }}'
    switch: dvSwitch
    state: absent
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
result string	always	information about performed operation Sample: {'changed': False, 'contact': None, 'contact_details': None, 'description': None, 'discovery_operation': 'both', 'discovery_protocol': 'cdp', 'dvswitch': 'test', 'health_check_teaming': False, 'health_check_teaming_interval': 0, 'health_check_vlan': False, 'health_check_vlan_interval': 0, 'mtu': 9000, 'multicast_filtering_mode': 'basic', 'result': 'DVS already configured properly', 'uplink_quantity': 2, 'uplinks': ['Uplink_1', 'Uplink_2'], 'version': '6.6.0'}

Authors

Joseph Callen (@jcpowermac)
Abhijeet Kasurde (@Akasurde)
Christian Kotte (@ckotte)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/community/vmware/vmware_dvswitch_module.html