W3cubDocs

/Ansible 2.10

community.vmware.vmware_guest_controller – Manage disk or USB controllers related to virtual machine in given vCenter infrastructure

Note

This plugin is part of the community.vmware collection.

To install it use: ansible-galaxy collection install community.vmware.

To use it in a playbook, specify: community.vmware.vmware_guest_controller.

Synopsis

  • This module can be used to add, remove disk controllers or USB controllers belonging to given virtual machine.
  • All parameters and VMware object names are case sensitive.

Requirements

The below requirements are needed on the host that executes this module.

  • python >= 2.7
  • PyVmomi

Parameters

Parameter Choices/Defaults Comments
controllers
list / elements=dictionary
A list of disk or USB controllers to add or remove.
Total 4 disk controllers with the same type are allowed per VM.
Total 2 USB controllers are allowed per VM, 1 USB 2.0 and 1 USB 3.0 or 3.1.
For specific guest OS, supported controller types please refer to VMware Compatibility Guide.
controller_number
integer
    Choices:
  • 0
  • 1
  • 2
  • 3
Disk controller bus number. When state is set to absent, this parameter is required.
When type set to usb2 or usb3, this parameter is not required.
state
string / required
    Choices:
  • present
  • absent
Add new controller or remove specified existing controller.
If state is set to absent, the specified controller will be removed from virtual machine when there is no disk or device attaching to it.
If specified controller is removed or not exist, no action will be taken only warning message.
If state is set to present, new controller with specified type will be added.
If the number of controller with specified controller type reaches it's maximum, no action will be taken only warning message.
type
string / required
    Choices:
  • buslogic
  • lsilogic
  • lsilogicsas
  • paravirtual
  • sata
  • nvme
  • usb2
  • usb3
Type of disk or USB controller.
From vSphere 6.5 and virtual machine with hardware version 13, nvme controller starts to be supported.
datacenter
string
Default:
"ha-datacenter"
The datacenter name to which virtual machine belongs to.
folder
string
Destination folder, absolute or relative path to find an existing guest.
This is a required parameter, only if multiple VMs are found with same name.
The folder should include the datacenter. ESX's datacenter is ha-datacenter
Examples:
folder: /ha-datacenter/vm
folder: ha-datacenter/vm
folder: /datacenter1/vm
folder: datacenter1/vm
folder: /datacenter1/vm/folder1
folder: datacenter1/vm/folder1
folder: /folder1/datacenter1/vm
folder: folder1/datacenter1/vm
folder: /folder1/datacenter1/vm/folder2
gather_disk_controller_facts
boolean
    Choices:
  • no
  • yes
Whether to collect existing disk and USB controllers facts only.
When this parameter is set to True, controllers parameter will be ignored.
hostname
string
The hostname or IP address of the vSphere vCenter or ESXi server.
If the value is not specified in the task, the value of environment variable VMWARE_HOST will be used instead.
Environment variable support added in Ansible 2.6.
moid
string
Managed Object ID of the instance to manage if known, this is a unique identifier only within a single vCenter instance.
This is required if name or uuid is not supplied.
name
string
Name of the virtual machine.
This is a required parameter, if parameter uuid or moid is not supplied.
password
string
The password of the vSphere vCenter or ESXi server.
If the value is not specified in the task, the value of environment variable VMWARE_PASSWORD will be used instead.
Environment variable support added in Ansible 2.6.

aliases: pass, pwd
port
integer
Default:
443
The port number of the vSphere vCenter or ESXi server.
If the value is not specified in the task, the value of environment variable VMWARE_PORT will be used instead.
Environment variable support added in Ansible 2.6.
proxy_host
string
Address of a proxy that will receive all HTTPS requests and relay them.
The format is a hostname or a IP.
If the value is not specified in the task, the value of environment variable VMWARE_PROXY_HOST will be used instead.
This feature depends on a version of pyvmomi greater than v6.7.1.2018.12
proxy_port
integer
Port of the HTTP proxy that will receive all HTTPS requests and relay them.
If the value is not specified in the task, the value of environment variable VMWARE_PROXY_PORT will be used instead.
sleep_time
integer
Default:
10
The sleep time in seconds after VM reconfigure task completes, used when not get the updated VM controller facts after VM reconfiguration.
This parameter is not required. Maximum value is 600.
use_instance_uuid
boolean
    Choices:
  • no ←
  • yes
Whether to use the VMware instance UUID rather than the BIOS UUID.
username
string
The username of the vSphere vCenter or ESXi server.
If the value is not specified in the task, the value of environment variable VMWARE_USER will be used instead.
Environment variable support added in Ansible 2.6.

aliases: admin, user
uuid
string
UUID of the instance to gather facts if known, this is VMware's unique identifier.
This is a required parameter, if parameter name or moid is not supplied.
validate_certs
boolean
    Choices:
  • no
  • yes ←
Allows connection when SSL certificates are not valid. Set to false when certificates are not trusted.
If the value is not specified in the task, the value of environment variable VMWARE_VALIDATE_CERTS will be used instead.
Environment variable support added in Ansible 2.6.
If set to yes, please make sure Python >= 2.7.9 is installed on the given machine.

Notes

Note

  • Tested on vSphere 6.0, 6.5 and 6.7

Examples

- name: Add disk and USB 3.0 controllers for virtual machine located by name
  community.vmware.vmware_guest_controller:
    hostname: "{{ vcenter_hostname }}"
    username: "{{ vcenter_username }}"
    password: "{{ vcenter_password }}"
    datacenter: "{{ datacenter_name }}"
    validate_certs: no
    name: test_VM
    controllers:
      - state: present
        type: sata
      - state: present
        type: nvme
      - state: present
        type: usb3
  delegate_to: localhost
  register: disk_controller_facts

- name: Remove disk controllers and USB 2.0 from virtual machine located by moid
  community.vmware.vmware_guest_controller:
    hostname: "{{ vcenter_hostname }}"
    username: "{{ vcenter_username }}"
    password: "{{ vcenter_password }}"
    datacenter: "{{ datacenter_name }}"
    validate_certs: no
    moid: vm-33
    controllers:
      - state: absent
        controller_number: 1
        type: sata
      - state: absent
        controller_number: 0
        type: nvme
      - state: absent
        type: usb2
  delegate_to: localhost
  register: disk_controller_facts

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
disk_controller_status
dictionary
always
metadata about the virtual machine's existing disk controllers or after adding or removing operation

Sample:
{'nvme': {'0': {'controller_busnumber': 0, 'controller_controllerkey': 100, 'controller_devicekey': 31000, 'controller_disks_devicekey': [], 'controller_label': 'NVME controller 0', 'controller_summary': 'NVME controller 0', 'controller_unitnumber': 30}}, 'sata': {'0': {'controller_busnumber': 0, 'controller_controllerkey': 100, 'controller_devicekey': 15000, 'controller_disks_devicekey': [16000, 16001], 'controller_label': 'SATA controller 0', 'controller_summary': 'AHCI', 'controller_unitnumber': 24}}, 'scsi': {'0': {'controller_busnumber': 0, 'controller_controllerkey': 100, 'controller_devicekey': 1000, 'controller_disks_devicekey': [2000], 'controller_label': 'SCSI controller 0', 'controller_summary': 'LSI Logic SAS', 'controller_unitnumber': 3}, '1': {'controller_busnumber': 1, 'controller_controllerkey': 100, 'controller_devicekey': 1001, 'controller_disks_devicekey': [], 'controller_label': 'SCSI controller 1', 'controller_summary': 'VMware paravirtual SCSI', 'controller_unitnumber': 4}}, 'usb2': {'0': {'controller_busnumber': 0, 'controller_controllerkey': 100, 'controller_devicekey': 7000, 'controller_disks_devicekey': [], 'controller_label': 'USB Controller', 'controller_summary': 'Auto connect Disabled', 'controller_unitnumber': 22}}}


Authors

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/community/vmware/vmware_guest_controller_module.html