W3cubDocs

/Ansible 2.10

google.cloud.gcp_compute_vpn_tunnel – Creates a GCP VpnTunnel

Note

This plugin is part of the google.cloud collection.

To install it use: ansible-galaxy collection install google.cloud.

To use it in a playbook, specify: google.cloud.gcp_compute_vpn_tunnel.

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis

VPN tunnel resource.

Requirements

The below requirements are needed on the host that executes this module.

python >= 2.6
requests >= 2.18.4
google-auth >= 1.3.0

Parameters

Parameter	Choices/Defaults	Comments
auth_kind string / required	Choices: application machineaccount serviceaccount	The type of credential used.
description string		An optional description of this resource.
env_type string		Specifies which Ansible environment you're running this module within. This should not be set unless you know what you're doing. This only alters the User Agent string for any API requests.
ike_version integer	Default: "2"	IKE protocol version to use when establishing the VPN tunnel with peer VPN gateway. Acceptable IKE versions are 1 or 2. Default version is 2.
local_traffic_selector list / elements=string		Local traffic selector to use when establishing the VPN tunnel with peer VPN gateway. The value should be a CIDR formatted string, for example `192.168.0.0/16`. The ranges should be disjoint. Only IPv4 is supported.
name string / required		Name of the resource. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
peer_ip string		IP address of the peer VPN gateway. Only IPv4 is supported.
project string		The Google Cloud Platform project to use.
region string / required		The region where the tunnel is located.
remote_traffic_selector list / elements=string		Remote traffic selector to use when establishing the VPN tunnel with peer VPN gateway. The value should be a CIDR formatted string, for example `192.168.0.0/16`. The ranges should be disjoint. Only IPv4 is supported.
router dictionary		URL of router resource to be used for dynamic routing. This field represents a link to a Router resource in GCP. It can be specified in two ways. First, you can place a dictionary with key 'selfLink' and value of your resource's selfLink Alternatively, you can add `register: name-of-resource` to a gcp_compute_router task and then set this router field to "{{ name-of-resource }}"
scopes list / elements=string		Array of scopes to be used
service_account_contents jsonarg		The contents of a Service Account JSON file, either in a dictionary or as a JSON string that represents it.
service_account_email string		An optional service account email address if machineaccount is selected and the user does not wish to use the default email.
service_account_file path		The path of a Service Account JSON file if serviceaccount is selected as type.
shared_secret string / required		Shared secret used to set the secure session between the Cloud VPN gateway and the peer VPN gateway.
state string	Choices: present ← absent	Whether the given object should exist in GCP
target_vpn_gateway dictionary		URL of the Target VPN gateway with which this VPN tunnel is associated. This field represents a link to a TargetVpnGateway resource in GCP. It can be specified in two ways. First, you can place a dictionary with key 'selfLink' and value of your resource's selfLink Alternatively, you can add `register: name-of-resource` to a gcp_compute_target_vpn_gateway task and then set this target_vpn_gateway field to "{{ name-of-resource }}"

Notes

Note

API Reference: https://cloud.google.com/compute/docs/reference/rest/v1/vpnTunnels
Cloud VPN Overview: https://cloud.google.com/vpn/docs/concepts/overview
Networks and Tunnel Routing: https://cloud.google.com/vpn/docs/concepts/choosing-networks-routing
for authentication, you can set service_account_file using the gcp_service_account_file env variable.
for authentication, you can set service_account_contents using the GCP_SERVICE_ACCOUNT_CONTENTS env variable.
For authentication, you can set service_account_email using the GCP_SERVICE_ACCOUNT_EMAIL env variable.
For authentication, you can set auth_kind using the GCP_AUTH_KIND env variable.
For authentication, you can set scopes using the GCP_SCOPES env variable.
Environment variables values will only be used if the playbook values are not set.
The service_account_email and service_account_file options are mutually exclusive.

Examples

- name: create a network
  google.cloud.gcp_compute_network:
    name: network-vpn-tunnel
    project: "{{ gcp_project }}"
    auth_kind: "{{ gcp_cred_kind }}"
    service_account_file: "{{ gcp_cred_file }}"
    state: present
  register: network

- name: create a router
  google.cloud.gcp_compute_router:
    name: router-vpn-tunnel
    network: "{{ network }}"
    bgp:
      asn: 64514
      advertise_mode: CUSTOM
      advertised_groups:
      - ALL_SUBNETS
      advertised_ip_ranges:
      - range: 1.2.3.4
      - range: 6.7.0.0/16
    region: us-central1
    project: "{{ gcp_project }}"
    auth_kind: "{{ gcp_cred_kind }}"
    service_account_file: "{{ gcp_cred_file }}"
    state: present
  register: router

- name: create a target vpn gateway
  google.cloud.gcp_compute_target_vpn_gateway:
    name: gateway-vpn-tunnel
    region: us-west1
    network: "{{ network }}"
    project: "{{ gcp_project }}"
    auth_kind: "{{ gcp_cred_kind }}"
    service_account_file: "{{ gcp_cred_file }}"
    state: present
  register: gateway

- name: create a vpn tunnel
  google.cloud.gcp_compute_vpn_tunnel:
    name: test_object
    region: us-west1
    target_vpn_gateway: "{{ gateway }}"
    router: "{{ router }}"
    shared_secret: super secret
    project: test_project
    auth_kind: serviceaccount
    service_account_file: "/tmp/auth.pem"
    state: present

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
creationTimestamp string	success	Creation timestamp in RFC3339 text format.
description string	success	An optional description of this resource.
id string	success	The unique identifier for the resource. This identifier is defined by the server.
ikeVersion integer	success	IKE protocol version to use when establishing the VPN tunnel with peer VPN gateway. Acceptable IKE versions are 1 or 2. Default version is 2.
localTrafficSelector list / elements=string	success	Local traffic selector to use when establishing the VPN tunnel with peer VPN gateway. The value should be a CIDR formatted string, for example `192.168.0.0/16`. The ranges should be disjoint. Only IPv4 is supported.
name string	success	Name of the resource. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
peerIp string	success	IP address of the peer VPN gateway. Only IPv4 is supported.
region string	success	The region where the tunnel is located.
remoteTrafficSelector list / elements=string	success	Remote traffic selector to use when establishing the VPN tunnel with peer VPN gateway. The value should be a CIDR formatted string, for example `192.168.0.0/16`. The ranges should be disjoint. Only IPv4 is supported.
router dictionary	success	URL of router resource to be used for dynamic routing.
sharedSecret string	success	Shared secret used to set the secure session between the Cloud VPN gateway and the peer VPN gateway.
sharedSecretHash string	success	Hash of the shared secret.
targetVpnGateway dictionary	success	URL of the Target VPN gateway with which this VPN tunnel is associated.

Authors

Google Inc. (@googlecloudplatform)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/google/cloud/gcp_compute_vpn_tunnel_module.html