Note
This plugin is part of the junipernetworks.junos collection.
To install it use: ansible-galaxy collection install junipernetworks.junos.
To use it in a playbook, specify: junipernetworks.junos.junos_interfaces.
New in version 1.0.0: of junipernetworks.junos
Note
This module has a corresponding action plugin.
The below requirements are needed on the host that executes this module.
| Parameter | Choices/Defaults | Comments | ||
|---|---|---|---|---|
| config list / elements=dictionary | The provided configuration | |||
| description string | Interface description. | |||
| duplex string |
| Interface link status. Applicable for Ethernet interfaces only, either in half duplex, full duplex or in automatic state which negotiates the duplex automatically. | ||
| enabled boolean |
| Administrative state of the interface. Set the value to true to administratively enabled the interface or false to disable it. | ||
| hold_time dictionary | The hold time for given interface name. | |||
| down integer | The link down hold time in milliseconds. | |||
| up integer | The link up hold time in milliseconds. | |||
| mtu integer | MTU for a specific interface. Applicable for Ethernet interfaces only. | |||
| name string / required | Full name of interface, e.g. ge-0/0/0. | |||
| speed string | Interface link speed. Applicable for Ethernet interfaces only. | |||
| running_config string | This option is used only with state parsed. The value of this option should be the output received from the Junos device by executing the command show interfaces. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result. | |||
| state string |
| The state of the configuration after module completion | ||
Note
netconf. See the Junos OS Platform Options.# Using deleted
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Configured by Ansible-1";
# speed 1g;
# mtu 1800
# }
# ge-0/0/2 {
# description "Configured by Ansible-2";
# ether-options {
# auto-negotiation;
# }
# }
- name: "Delete given options for the interface (Note: This won't delete the interface itself if any other values are configured for interface)"
junipernetworks.junos.junos_interfaces:
config:
- name: ge-0/0/1
description: Configured by Ansible-1
speed: 1g
mtu: 1800
- name: ge-0/0/2
description: Configured by Ansible -2
state: deleted
# After state:
# ------------
# user@junos01# show interfaces
# ge-0/0/2 {
# ether-options {
# auto-negotiation;
# }
# }
# Using merged
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "test interface";
# speed 1g;
# }
- name: Merge provided configuration with device configuration (default operation
is merge)
junipernetworks.junos.junos_interfaces:
config:
- name: ge-0/0/1
description: Configured by Ansible-1
enabled: true
mtu: 1800
- name: ge-0/0/2
description: Configured by Ansible-2
enabled: false
state: merged
# After state:
# ------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Configured by Ansible-1";
# speed 1g;
# mtu 1800
# }
# ge-0/0/2 {
# disable;
# description "Configured by Ansible-2";
# }
# Using overridden
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Configured by Ansible-1";
# speed 1g;
# mtu 1800
# }
# ge-0/0/2 {
# disable;
# description "Configured by Ansible-2";
# ether-options {
# auto-negotiation;
# }
# }
# ge-0/0/11 {
# description "Configured by Ansible-11";
# }
- name: Override device configuration of all interfaces with provided configuration
junipernetworks.junos.junos_interfaces:
config:
- name: ge-0/0/2
description: Configured by Ansible-2
enabled: false
mtu: 2800
- name: ge-0/0/3
description: Configured by Ansible-3
state: overridden
# After state:
# ------------
# user@junos01# show interfaces
# ge-0/0/2 {
# disable;
# description "Configured by Ansible-2";
# mtu 2800
# }
# ge-0/0/3 {
# description "Configured by Ansible-3";
# }
# Using replaced
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Configured by Ansible-1";
# speed 1g;
# mtu 1800
# }
# ge-0/0/2 {
# disable;
# mtu 1800;
# speed 1g;
# description "Configured by Ansible-2";
# ether-options {
# auto-negotiation;
# }
# }
# ge-0/0/11 {
# description "Configured by Ansible-11";
# }
- name: Replaces device configuration of listed interfaces with provided configuration
junipernetworks.junos.junos_interfaces:
config:
- name: ge-0/0/2
description: Configured by Ansible-2
enabled: false
mtu: 2800
- name: ge-0/0/3
description: Configured by Ansible-3
state: replaced
# After state:
# ------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Configured by Ansible-1";
# speed 1g;
# mtu 1800
# }
# ge-0/0/2 {
# disable;
# description "Configured by Ansible-2";
# mtu 2800
# }
# ge-0/0/3 {
# description "Configured by Ansible-3";
# }
# ge-0/0/11 {
# description "Configured by Ansible-11";
# }
# Using gathered
# Before state:
# ------------
#
# user@junos01# show interfaces
# gr-0/0/0 {
# description "test gre interface";
# }
# fxp0 {
# unit 0 {
# family inet {
# dhcp;
# }
# }
# }
# pp0 {
# unit 0 {
# pppoe-options {
# idle-timeout 100;
# access-concentrator ispl.com;
# service-name "[email protected]";
# auto-reconnect 100;
# client;
# ## Warning: missing mandatory statement(s): 'underlying-interface'
# }
# }
# }
#
- name: Gather junos interfaces as in given arguments
junipernetworks.junos.junos_interfaces:
state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": [
# {
# "description": "test gre interface",
# "enabled": true,
# "name": "gr-0/0/0"
# },
# {
# "enabled": true,
# "name": "fxp0"
# },
# {
# "enabled": true,
# "name": "pp0"
# }
# ]
# After state:
# ------------
#
# user@junos01# show interfaces
# gr-0/0/0 {
# description "test gre interface";
# }
# fxp0 {
# unit 0 {
# family inet {
# dhcp;
# }
# }
# }
# pp0 {
# unit 0 {
# pppoe-options {
# idle-timeout 100;
# access-concentrator ispl.com;
# service-name "[email protected]";
# auto-reconnect 100;
# client;
# ## Warning: missing mandatory statement(s): 'underlying-interface'
# }
# }
# }
# Using parsed
# parsed.cfg
# ------------
#
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
# <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
# <interfaces>
# <interface>
# <name>ge-0/0/1</name>
# <description>Configured by Ansible</description>
# <disable/>
# <speed>100m</speed>
# <mtu>1024</mtu>
# <hold-time>
# <up>2000</up>
# <down>2200</down>
# </hold-time>
# <link-mode>full-duplex</link-mode>
# <unit>
# <name>0</name>
# <family>
# <ethernet-switching>
# <interface-mode>access</interface-mode>
# <vlan>
# <members>vlan100</members>
# </vlan>
# </ethernet-switching>
# </family>
# </unit>
# </interface>
# </interfaces>
# </configuration>
# </rpc-reply>
# - name: Convert interfaces config to argspec without connecting to the appliance
# junipernetworks.junos.junos_interfaces:
# running_config: "{{ lookup('file', './parsed.cfg') }}"
# state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": [
# {
# "description": "Configured by Ansible",
# "duplex": "full-duplex",
# "enabled": false,
# "hold_time": {
# "down": 2200,
# "up": 2000
# },
# "mtu": 1024,
# "name": "ge-0/0/1",
# "speed": "100m"
# }
# ]
#
# Using rendered
- name: Render platform specific xml from task input using rendered state
junipernetworks.junos.junos_interfaces:
config:
- name: ge-0/0/2
description: Configured by Ansibull
mtu: 2048
speed: 20m
hold_time:
up: 3200
down: 3200
state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": <nc:interfaces
# xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
# <nc:interface>
# <nc:name>ge-0/0/2</nc:name>
# <nc:description>Configured by Ansibull</nc:description>
# <nc:speed>20m</nc:speed>
# <nc:mtu>2048</nc:mtu>
# <nc:hold-time>
# <nc:up>3200</nc:up>
# <nc:down>3200</nc:down>
# </nc:hold-time>
# </nc:interface>
# </nc:interfaces>"
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| after list / elements=string | when changed | The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above. |
| before list / elements=string | always | The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above. |
| xml list / elements=string | always | The set of xml rpc payload pushed to the remote device. Sample: ['<?xml version="1.0" encoding="UTF-8"?> <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f"> <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC"> <interfaces> <interface> <name>ge-0/0/1</name> <description>Configured by Ansible</description> <disable/> <speed>100m</speed> <mtu>1024</mtu> <hold-time> <up>2000</up> <down>2200</down> </hold-time> <link-mode>full-duplex</link-mode> <unit> <name>0</name> <family> <ethernet-switching> <interface-mode>access</interface-mode> <vlan> <members>vlan100</members> </vlan> </ethernet-switching> </family> </unit> </interface> </interfaces> </configuration> </rpc-reply>', 'xml 2', 'xml 3'] |
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/junipernetworks/junos/junos_interfaces_module.html