Note
This plugin is part of the junipernetworks.junos collection.
To install it use: ansible-galaxy collection install junipernetworks.junos.
To use it in a playbook, specify: junipernetworks.junos.junos_lag_interfaces.
New in version 1.0.0: of junipernetworks.junos
Note
This module has a corresponding action plugin.
The below requirements are needed on the host that executes this module.
| Parameter | Choices/Defaults | Comments | ||
|---|---|---|---|---|
| config list / elements=dictionary | A list of link aggregation group configurations. | |||
| link_protection boolean |
| This boolean option indicates if link protection should be enabled for the LAG interface. If value is True link protection is enabled on LAG and if value is False link protection is disabled. | ||
| members list / elements=dictionary | List of member interfaces of the link aggregation group. The value can be single interface or list of interfaces. | |||
| link_type string |
| The value of this options configures the member link as either primary or backup. Value primary configures primary interface for link-protection mode and backup configures backup interface for link-protection mode. | ||
| member string | Name of the member interface. | |||
| mode string |
| LAG mode. A value of passive will enable LACP in passive mode that is it will respond to LACP packets and active configures the link to initiate transmission of LACP packets. | ||
| name string / required | Name of the link aggregation group (LAG). | |||
| running_config string | This option is used only with state parsed. The value of this option should be the output received from the Junos device by executing the command show interfaces. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result | |||
| state string |
| The state of the configuration after module completion | ||
Note
netconf. See the Junos OS Platform Options.# Using merged
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Ansible configured interface 1";
# ether-options {
# 802.3ad ae0;
# }
# }
# ge-0/0/2 {
# description "Ansible configured interface 2";
# ether-options {
# 802.3ad ae0;
# }
# }
# ae0 {
# description "lag interface";
# }
# ae1 {
# description "lag interface 1";
# }
- name: "Delete LAG attributes of given interfaces (Note: This won't delete the interface itself)"
junipernetworks.junos.junos_lag_interfaces:
config:
- name: ae0
- name: ae1
state: deleted
# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Ansible configured interface 1";
# }
# ge-0/0/2 {
# description "Ansible configured interface 2";
# }
# Using merged
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Ansible configured interface 1";
# }
# ge-0/0/2 {
# description "Ansible configured interface 2";
# }
- name: Merge provided configuration with device configuration
junipernetworks.junos.junos_lag_interfaces:
config:
- name: ae0
members:
- member: ge-0/0/1
link_type: primary
- member: ge-0/0/2
link_type: backup
state: merged
# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Ansible configured interface 1";
# ether-options {
# 802.3ad {
# ae0;
# primary;
# }
# }
# }
# ge-0/0/2 {
# description "Ansible configured interface 2";
# ether-options {
# 802.3ad {
# ae0;
# backup;
# }
# }
# }
# Using merged
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Ansible configured interface 1";
# ether-options {
# 802.3ad ae0;
# }
# }
# ge-0/0/2 {
# description "Ansible configured interface 2";
# ether-options {
# 802.3ad ae0;
# }
# }
# ae0 {
# description "lag interface";
# }
# ae3 {
# description "lag interface 3";
# }
- name: Overrides all device LAG configuration with provided configuration
junipernetworks.junos.junos_lag_interfaces:
config:
- name: ae0
members:
- member: ge-0/0/2
- name: ae1
members:
- member: ge-0/0/1
mode: passive
state: overridden
# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Ansible configured interface 1";
# ether-options {
# 802.3ad ae1;
# }
# }
# ge-0/0/2 {
# description "Ansible configured interface 2";
# ether-options {
# 802.3ad ae0;
# }
# }
# ae0 {
# description "lag interface";
# }
# ae1 {
# aggregated-ether-options {
# lacp {
# active;
# }
# }
# }
# Using merged
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Ansible configured interface 1";
# }
# ge-0/0/2 {
# description "Ansible configured interface 2";
# }
# ge-0/0/3 {
# description "Ansible configured interface 3";
# }
- name: Replace device LAG configuration with provided configuration
junipernetworks.junos.junos_lag_interfaces:
config:
- name: ae0
members:
- member: ge-0/0/1
mode: active
state: replaced
# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Ansible configured interface 1";
# ether-options {
# 802.3ad ae0;
# }
# }
# ge-0/0/2 {
# description "Ansible configured interface 2";
# }
# ae0 {
# aggregated-ether-options {
# lacp {
# active;
# }
# }
# }
# ge-0/0/3 {
# description "Ansible configured interface 3";
# }
# Using gathered
# Before state:
# ------------
#
# ansible@cm123456tr21# show interfaces
# ge-0/0/1 {
# ether-options {
# 802.3ad ae1;
# }
# }
# ge-0/0/2 {
# ether-options {
# 802.3ad ae1;
# }
# }
# ge-0/0/3 {
# ether-options {
# 802.3ad {
# ae2;
# primary;
# }
# }
# }
# ge-0/0/4 {
# ether-options {
# 802.3ad {
# ae2;
# backup;
# }
# }
# }
# ge-1/0/0 {
# unit 0 {
# family inet {
# address 192.168.100.1/24;
# address 10.200.16.20/24;
# }
# family inet6;
# }
# }
# ge-2/0/0 {
# unit 0 {
# family inet {
# address 192.168.100.2/24;
# address 10.200.16.21/24;
# }
# family inet6;
# }
# }
# ge-3/0/0 {
# unit 0 {
# family inet {
# address 192.168.100.3/24;
# address 10.200.16.22/24;
# }
# family inet6;
# }
# }
# ae1 {
# description "Configured by Ansible";
# aggregated-ether-options {
# lacp {
# active;
# }
# }
# }
# ae2 {
# description "Configured by Ansible";
# aggregated-ether-options {
# link-protection;
# lacp {
# passive;
# }
# }
# }
# em1 {
# description TEST;
# }
# fxp0 {
# description ANSIBLE;
# speed 1g;
# link-mode automatic;
# unit 0 {
# family inet {
# address 10.8.38.38/24;
# }
# }
# }
- name: Gather junos lag interfaces as in given arguments
junipernetworks.junos.junos_lag_interfaces:
state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": [
# {
# "members": [
# {
# "member": "ge-0/0/1"
# },
# {
# "member": "ge-0/0/2"
# }
# ],
# "mode": "active",
# "name": "ae1"
# },
# {
# "link_protection": true,
# "members": [
# {
# "link_type": "primary",
# "member": "ge-0/0/3"
# },
# {
# "link_type": "backup",
# "member": "ge-0/0/4"
# }
# ],
# "mode": "passive",
# "name": "ae2"
# }
# ]
# After state:
# ------------
#
# ansible@cm123456tr21# show interfaces
# ge-0/0/1 {
# ether-options {
# 802.3ad ae1;
# }
# }
# ge-0/0/2 {
# ether-options {
# 802.3ad ae1;
# }
# }
# ge-0/0/3 {
# ether-options {
# 802.3ad {
# ae2;
# primary;
# }
# }
# }
# ge-0/0/4 {
# ether-options {
# 802.3ad {
# ae2;
# backup;
# }
# }
# }
# ge-1/0/0 {
# unit 0 {
# family inet {
# address 192.168.100.1/24;
# address 10.200.16.20/24;
# }
# family inet6;
# }
# }
# ge-2/0/0 {
# unit 0 {
# family inet {
# address 192.168.100.2/24;
# address 10.200.16.21/24;
# }
# family inet6;
# }
# }
# ge-3/0/0 {
# unit 0 {
# family inet {
# address 192.168.100.3/24;
# address 10.200.16.22/24;
# }
# family inet6;
# }
# }
# ae1 {
# description "Configured by Ansible";
# aggregated-ether-options {
# lacp {
# active;
# }
# }
# }
# ae2 {
# description "Configured by Ansible";
# aggregated-ether-options {
# link-protection;
# lacp {
# passive;
# }
# }
# }
# em1 {
# description TEST;
# }
# fxp0 {
# description ANSIBLE;
# speed 1g;
# link-mode automatic;
# unit 0 {
# family inet {
# address 10.8.38.38/24;
# }
# }
# }
# Using parsed
# parsed.cfg
# ------------
#
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
# <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
# <interfaces>
# <interface>
# <name>ge-0/0/1</name>
# <ether-options>
# <ieee-802.3ad>
# <bundle>ae1</bundle>
# </ieee-802.3ad>
# </ether-options>
# </interface>
# <interface>
# <name>ge-0/0/2</name>
# <ether-options>
# <ieee-802.3ad>
# <bundle>ae1</bundle>
# </ieee-802.3ad>
# </ether-options>
# </interface>
# <interface>
# <name>ge-0/0/3</name>
# <ether-options>
# <ieee-802.3ad>
# <bundle>ae2</bundle>
# <primary/>
# </ieee-802.3ad>
# </ether-options>
# </interface>
# <interface>
# <name>ge-0/0/4</name>
# <ether-options>
# <ieee-802.3ad>
# <bundle>ae2</bundle>
# <backup/>
# </ieee-802.3ad>
# </ether-options>
# </interface>
# <interface>
# <name>ge-1/0/0</name>
# <unit>
# <name>0</name>
# <family>
# <inet>
# <address>
# <name>192.168.100.1/24</name>
# </address>
# <address>
# <name>10.200.16.20/24</name>
# </address>
# </inet>
# <inet6>
# </inet6>
# </family>
# </unit>
# </interface>
# <interface>
# <name>ge-2/0/0</name>
# <unit>
# <name>0</name>
# <family>
# <inet>
# <address>
# <name>192.168.100.2/24</name>
# </address>
# <address>
# <name>10.200.16.21/24</name>
# </address>
# </inet>
# <inet6>
# </inet6>
# </family>
# </unit>
# </interface>
# <interface>
# <name>ge-3/0/0</name>
# <unit>
# <name>0</name>
# <family>
# <inet>
# <address>
# <name>192.168.100.3/24</name>
# </address>
# <address>
# <name>10.200.16.22/24</name>
# </address>
# </inet>
# <inet6>
# </inet6>
# </family>
# </unit>
# </interface>
# <interface>
# <name>ae1</name>
# <description>Configured by Ansible</description>
# <aggregated-ether-options>
# <lacp>
# <active/>
# </lacp>
# </aggregated-ether-options>
# </interface>
# <interface>
# <name>ae2</name>
# <description>Configured by Ansible</description>
# <aggregated-ether-options>
# <link-protection>
# </link-protection>
# <lacp>
# <passive/>
# </lacp>
# </aggregated-ether-options>
# </interface>
# <interface>
# <name>em1</name>
# <description>TEST</description>
# </interface>
# <interface>
# <name>fxp0</name>
# <description>ANSIBLE</description>
# <speed>1g</speed>
# <link-mode>automatic</link-mode>
# <unit>
# <name>0</name>
# <family>
# <inet>
# <address>
# <name>10.8.38.38/24</name>
# </address>
# </inet>
# </family>
# </unit>
# </interface>
# </interfaces>
# </configuration>
# </rpc-reply>
# - name: Convert interfaces config to argspec without connecting to the appliance
# junipernetworks.junos.junos_lag_interfaces:
# running_config: "{{ lookup('file', './parsed.cfg') }}"
# state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": [
# {
# "members": [
# {
# "member": "ge-0/0/1"
# },
# {
# "member": "ge-0/0/2"
# }
# ],
# "mode": "active",
# "name": "ae1"
# },
# {
# "link_protection": true,
# "members": [
# {
# "link_type": "primary",
# "member": "ge-0/0/3"
# },
# {
# "link_type": "backup",
# "member": "ge-0/0/4"
# }
# ],
# "mode": "passive",
# "name": "ae2"
# }
# ]
# Using rendered
- name: Render platform specific xml from task input using rendered state
junipernetworks.junos.junos_lag_interfaces:
config:
- name: ae1
members:
- member: ge-0/0/1
- member: ge-0/0/2
mode: active
- name: ae2
link_protection: true
members:
- member: ge-0/0/3
link_type: primary
- member: ge-0/0/4
link_type: backup
mode: passive
# Task Output (redacted)
# -----------------------
# "rendered": "<nc:interfaces
# xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
# <nc:interface>
# <nc:name>ae1</nc:name>
# <nc:aggregated-ether-options>
# <nc:lacp>
# <nc:active/>
# </nc:lacp>
# </nc:aggregated-ether-options>
# </nc:interface>
# <nc:interface>
# <nc:name>ge-0/0/1</nc:name>
# <nc:ether-options>
# <nc:ieee-802.3ad>
# <nc:bundle>ae1</nc:bundle>
# </nc:ieee-802.3ad>
# </nc:ether-options>
# </nc:interface>
# <nc:interface>
# <nc:name>ge-0/0/2</nc:name>
# <nc:ether-options>
# <nc:ieee-802.3ad>
# <nc:bundle>ae1</nc:bundle>
# </nc:ieee-802.3ad>
# </nc:ether-options>
# </nc:interface>
# <nc:interface>
# <nc:name>ae2</nc:name>
# <nc:aggregated-ether-options>
# <nc:lacp>
# <nc:passive/>
# </nc:lacp>
# <nc:link-protection/>
# </nc:aggregated-ether-options>
# </nc:interface>
# <nc:interface>
# <nc:name>ge-0/0/3</nc:name>
# <nc:ether-options>
# <nc:ieee-802.3ad>
# <nc:bundle>ae2</nc:bundle>
# <nc:primary/>
# </nc:ieee-802.3ad>
# </nc:ether-options>
# </nc:interface>
# <nc:interface>
# <nc:name>ge-0/0/4</nc:name>
# <nc:ether-options>
# <nc:ieee-802.3ad>
# <nc:bundle>ae2</nc:bundle>
# <nc:backup/>
# </nc:ieee-802.3ad>
# </nc:ether-options>
# </nc:interface>
# </nc:interfaces>"
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| after list / elements=string | when changed | The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above. |
| before list / elements=string | always | The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above. |
| xml list / elements=string | always | The set of xml rpc payload pushed to the remote device. Sample: ['<nc:interfaces xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"> <nc:interface> <nc:name>ae1</nc:name> <nc:aggregated-ether-options> <nc:lacp> <nc:active/> </nc:lacp> </nc:aggregated-ether-options> </nc:interface> <nc:interface> <nc:name>ge-0/0/1</nc:name> <nc:ether-options> <nc:ieee-802.3ad> <nc:bundle>ae1</nc:bundle> </nc:ieee-802.3ad> </nc:ether-options> </nc:interface> <nc:interface> <nc:name>ge-0/0/2</nc:name> <nc:ether-options> <nc:ieee-802.3ad> <nc:bundle>ae1</nc:bundle> </nc:ieee-802.3ad> </nc:ether-options> </nc:interface> <nc:interface> <nc:name>ae2</nc:name> <nc:aggregated-ether-options> <nc:lacp> <nc:passive/> </nc:lacp> <nc:link-protection/> </nc:aggregated-ether-options> </nc:interface> <nc:interface> <nc:name>ge-0/0/3</nc:name> <nc:ether-options> <nc:ieee-802.3ad> <nc:bundle>ae2</nc:bundle> <nc:primary/> </nc:ieee-802.3ad> </nc:ether-options> </nc:interface> <nc:interface> <nc:name>ge-0/0/4</nc:name> <nc:ether-options> <nc:ieee-802.3ad> <nc:bundle>ae2</nc:bundle> <nc:backup/> </nc:ieee-802.3ad> </nc:ether-options> </nc:interface> </nc:interfaces>', 'xml 2', 'xml 3'] |
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/junipernetworks/junos/junos_lag_interfaces_module.html