W3cubDocs

/Ansible 2.10

netapp.ontap.na_ontap_aggregate – NetApp ONTAP manage aggregates.

Note

This plugin is part of the netapp.ontap collection.

To install it use: ansible-galaxy collection install netapp.ontap.

To use it in a playbook, specify: netapp.ontap.na_ontap_aggregate.

New in version 2.6.0: of netapp.ontap

Synopsis

  • Create, delete, or manage aggregates on ONTAP.

Requirements

The below requirements are needed on the host that executes this module.

  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward.
  • REST support requires ONTAP 9.6 or later.
  • Ansible 2.6
  • Ansible 2.9 or later is strongly recommended as it enables the new collection delivery system.
  • Python2 netapp-lib (2017.10.30) or later. Install using ‘pip install netapp-lib’
  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’
  • netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues.
  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
cert_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client cert file (.pem).
not supported with python 2.6.
disk_count
integer
Number of disks to place into the aggregate, including parity disks.
The disks in this newly-created aggregate come from the spare disk pool.
The smallest disks in this pool join the aggregate first, unless the disk-size argument is provided.
Either disk-count or disks must be supplied. Range [0..2^31-1].
Required when state=present.
Modifiable only if specified disk_count is larger than current disk_count.
Cannot create raidgroup with 1 disk when using raid type raid4.
If the disk_count % raid_size == 1, only disk_count/raid_size * raid_size will be added.
If disk_count is 6, raid_type is raid4, raid_size 4, all 6 disks will be added.
If disk_count is 5, raid_type is raid4, raid_size 4, 5/4 * 4 = 4 will be added. 1 will not be added.
disk_size
integer
added in 2.7.0 of netapp.ontap
Disk size to use in 4K block size. Disks within 10% of specified size will be used.
disk_size_with_unit
string
Disk size to use in the specified unit.
It is a positive integer number followed by unit of T/G/M/K. For example, 72G, 1T and 32M.
This option is ignored if a specific list of disks is specified through the "disks" parameter.
You must only use one of either "disk-size" or "disk-size-with-unit" parameters.
disk_type
string
added in 2.7.0 of netapp.ontap
    Choices:
  • ATA
  • BSAS
  • FCAL
  • FSAS
  • LUN
  • MSATA
  • SAS
  • SSD
  • VMDISK
Type of disk to use to build aggregate
disks
list / elements=string
added in 2.8.0 of netapp.ontap
Specific list of disks to use for the new aggregate.
To create a "mirrored" aggregate with a specific list of disks, both 'disks' and 'mirror_disks' options must be supplied. Additionally, the same number of disks must be supplied in both lists.
feature_flags
dictionary
added in 20.5.0 of netapp.ontap
Enable or disable a new feature.
This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility.
Supported keys and values are subject to change without notice. Unknown keys are ignored.
from_name
string
added in 2.7.0 of netapp.ontap
Name of the aggregate to be renamed.
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no
  • yes
Enable and disable https.
Ignored when using REST as only https is supported.
Ignored when using SSL certificate authentication as it requires SSL.
ignore_pool_checks
boolean
added in 20.8.0 of netapp.ontap
    Choices:
  • no
  • yes
only valid when disks option is used.
disks in a plex should belong to the same spare pool, and mirror disks to another spare pool.
when set to true, these checks are ignored.
is_mirrored
boolean
added in 2.8.0 of netapp.ontap
    Choices:
  • no
  • yes
Specifies that the new aggregate be mirrored (have two plexes).
If set to true, then the indicated disks will be split across the two plexes. By default, the new aggregate will not be mirrored.
This option cannot be used when a specific list of disks is supplied with either the 'disks' or 'mirror_disks' options.
key_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client key file.
mirror_disks
list / elements=string
added in 2.8.0 of netapp.ontap
List of mirror disks to use. It must contain the same number of disks specified in 'disks'.
name
string / required
The name of the aggregate to manage.
nodes
list / elements=string
Node(s) for the aggregate to be created on. If no node specified, mgmt lif home will be used.
If multiple nodes specified an aggr stripe will be made.
object_store_name
string
added in 2.9.0 of netapp.ontap
Name of the object store configuration attached to the aggregate
ontapi
integer
The ontap api version to use
password
string
Password for the specified user.

aliases: pass
raid_size
integer
added in 2.7.0 of netapp.ontap
Sets the maximum number of drives per raid group.
raid_type
string
added in 2.7.0 of netapp.ontap
    Choices:
  • raid4
  • raid_dp
  • raid_tec
  • raid_0
Specifies the type of RAID groups to use in the new aggregate.
raid_0 is only available on ONTAP Select.
service_state
string
    Choices:
  • online
  • offline
Whether the specified aggregate should be enabled or disabled. Creates aggregate if doesnt exist.
snaplock_type
string
added in 20.1.0 of netapp.ontap
    Choices:
  • compliance
  • enterprise
  • non_snaplock
Type of snaplock for the aggregate being created.
spare_pool
string
added in 2.8.0 of netapp.ontap
    Choices:
  • Pool0
  • Pool1
Specifies the spare pool from which to select spare disks to use in creation of a new aggregate.
state
string
    Choices:
  • present
  • absent
Whether the specified aggregate should exist or not.
time_out
integer
added in 2.8.0 of netapp.ontap
Default:
100
time to wait for aggregate creation in seconds
default is set to 100 seconds
unmount_volumes
boolean
    Choices:
  • no
  • yes
If set to "TRUE", this option specifies that all of the volumes hosted by the given aggregate are to be unmounted
before the offline operation is executed.
By default, the system will reject any attempt to offline an aggregate that hosts one or more online volumes.
use_rest
string
Default:
"auto"
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
always -- will always use the REST API
never -- will always use the ZAPI
auto -- will try to use the REST Api
username
string
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required.
For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.
Two authentication methods are supported
1. basic authentication, using username and password,
2. SSL certificate authentication, using a ssl client cert file, and optionally a private key file.
To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.
wait_for_online
boolean
added in 2.8.0 of netapp.ontap
    Choices:
  • no
  • yes
Set this parameter to 'true' for synchronous execution during create (wait until aggregate status is online)
Set this parameter to 'false' for asynchronous execution
For asynchronous, execution exits as soon as the request is sent, without checking aggregate status

Notes

Note

  • The modules prefixed with na\_ontap are built to support the ONTAP storage platform.

Examples

- name: Create Aggregates and wait 5 minutes until aggregate is online
  na_ontap_aggregate:
    state: present
    service_state: online
    name: ansibleAggr
    disk_count: 1
    wait_for_online: True
    time_out: 300
    snaplock_type: non_snaplock
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"

- name: Manage Aggregates
  na_ontap_aggregate:
    state: present
    service_state: offline
    unmount_volumes: true
    name: ansibleAggr
    disk_count: 1
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"

- name: Attach object store
  na_ontap_aggregate:
    state: present
    name: aggr4
    object_store_name: sgws_305
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"

- name: Rename Aggregates
  na_ontap_aggregate:
    state: present
    service_state: online
    from_name: ansibleAggr
    name: ansibleAggr2
    disk_count: 1
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"

- name: Delete Aggregates
  na_ontap_aggregate:
    state: absent
    service_state: offline
    unmount_volumes: true
    name: ansibleAggr
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"

Authors

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/netapp/ontap/na_ontap_aggregate_module.html