W3cubDocs

/Ansible 2.10

netapp.ontap.na_ontap_net_subnet – NetApp ONTAP Create, delete, modify network subnets.

Note

This plugin is part of the netapp.ontap collection.

To install it use: ansible-galaxy collection install netapp.ontap.

To use it in a playbook, specify: netapp.ontap.na_ontap_net_subnet.

New in version 2.8.0: of netapp.ontap

Synopsis

  • Create, modify, destroy the network subnet

Requirements

The below requirements are needed on the host that executes this module.

  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward.
  • REST support requires ONTAP 9.6 or later.
  • Ansible 2.6
  • Ansible 2.9 or later is strongly recommended as it enables the new collection delivery system.
  • Python2 netapp-lib (2017.10.30) or later. Install using ‘pip install netapp-lib’
  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’
  • netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues.
  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
broadcast_domain
string
Specify the required broadcast_domain name for the subnet.
A broadcast domain can not be modified after the subnet has been created
cert_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client cert file (.pem).
not supported with python 2.6.
feature_flags
dictionary
added in 20.5.0 of netapp.ontap
Enable or disable a new feature.
This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility.
Supported keys and values are subject to change without notice. Unknown keys are ignored.
from_name
string
Name of the subnet to be renamed
gateway
string
Specify the gateway for the default route of the subnet.
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no ←
  • yes
Enable and disable https.
Ignored when using REST as only https is supported.
Ignored when using SSL certificate authentication as it requires SSL.
ip_ranges
list / elements=string
Specify the list of IP address ranges associated with the subnet.
ipspace
string
Specify the ipspace for the subnet.
The default value for this parameter is the default IPspace, named 'Default'.
key_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client key file.
name
string / required
Specify the subnet name.
ontapi
integer
The ontap api version to use
password
string
Password for the specified user.

aliases: pass
state
string
    Choices:
  • present ←
  • absent
Whether the specified network interface group should exist or not.
subnet
string
Specify the subnet (ip and mask).
use_rest
string
Default:
"auto"
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
always -- will always use the REST API
never -- will always use the ZAPI
auto -- will try to use the REST Api
username
string
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required.
For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.
Two authentication methods are supported
1. basic authentication, using username and password,
2. SSL certificate authentication, using a ssl client cert file, and optionally a private key file.
To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes ←
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.

Notes

Note

  • The modules prefixed with na\_ontap are built to support the ONTAP storage platform.

Examples

- name: create subnet
  na_ontap_net_subnet:
    state: present
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    hostname: "{{ netapp_hostname }}"
    subnet: 10.10.10.0/24
    name: subnet-adm
    ip_ranges: [ '10.10.10.30-10.10.10.40', '10.10.10.51' ]
    gateway: 10.10.10.254
    ipspace: Default
    broadcast_domain: Default
- name: delete subnet
  na_ontap_net_subnet:
    state: absent
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    hostname: "{{ netapp_hostname }}"
    name: subnet-adm
    ipspace: Default
- name: rename subnet
  na_ontap_net_subnet:
    state: present
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    hostname: "{{ netapp_hostname }}"
    name: subnet-adm-new
    from_name: subnet-adm
    ipspace: Default

Authors

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/netapp/ontap/na_ontap_net_subnet_module.html