W3cubDocs

/Ansible 2.10

netapp.ontap.na_ontap_nfs – NetApp ONTAP NFS status

Note

This plugin is part of the netapp.ontap collection.

To install it use: ansible-galaxy collection install netapp.ontap.

To use it in a playbook, specify: netapp.ontap.na_ontap_nfs.

New in version 2.6.0: of netapp.ontap

Synopsis

  • Enable or disable NFS on ONTAP

Requirements

The below requirements are needed on the host that executes this module.

  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward.
  • REST support requires ONTAP 9.6 or later.
  • Ansible 2.6
  • Ansible 2.9 or later is strongly recommended as it enables the new collection delivery system.
  • Python2 netapp-lib (2017.10.30) or later. Install using ‘pip install netapp-lib’
  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’
  • netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues.
  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
cert_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client cert file (.pem).
not supported with python 2.6.
feature_flags
dictionary
added in 20.5.0 of netapp.ontap
Enable or disable a new feature.
This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility.
Supported keys and values are subject to change without notice. Unknown keys are ignored.
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no
  • yes
Enable and disable https.
Ignored when using REST as only https is supported.
Ignored when using SSL certificate authentication as it requires SSL.
key_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client key file.
nfsv3
string
    Choices:
  • enabled
  • disabled
status of NFSv3.
nfsv3_fsid_change
string
added in 2.7.0 of netapp.ontap
    Choices:
  • enabled
  • disabled
status of if NFSv3 clients see change in FSID as they traverse filesystems.
nfsv4
string
    Choices:
  • enabled
  • disabled
status of NFSv4.
nfsv40_acl
string
added in 2.7.0 of netapp.ontap
    Choices:
  • enabled
  • disabled
status of NFS v4.0 ACL feature
nfsv40_read_delegation
string
added in 2.7.0 of netapp.ontap
    Choices:
  • enabled
  • disabled
status for NFS v4.0 read delegation feature.
nfsv40_referrals
string
added in 2.9.0 of netapp.ontap
    Choices:
  • enabled
  • disabled
status for NFS v4.0 referrals.
nfsv40_write_delegation
string
added in 2.7.0 of netapp.ontap
    Choices:
  • enabled
  • disabled
status for NFS v4.0 write delegation feature.
nfsv41
string
    Choices:
  • enabled
  • disabled
status of NFSv41.

aliases: nfsv4.1
nfsv41_acl
string
added in 2.7.0 of netapp.ontap
    Choices:
  • enabled
  • disabled
status of NFS v4.1 ACL feature
nfsv41_pnfs
string
added in 2.9.0 of netapp.ontap
    Choices:
  • enabled
  • disabled
status of NFSv41 pNFS.
nfsv41_read_delegation
string
added in 2.7.0 of netapp.ontap
    Choices:
  • enabled
  • disabled
status for NFS v4.1 read delegation feature.
nfsv41_referrals
string
added in 2.9.0 of netapp.ontap
    Choices:
  • enabled
  • disabled
status for NFS v4.1 referrals.
nfsv41_write_delegation
string
added in 2.7.0 of netapp.ontap
    Choices:
  • enabled
  • disabled
status for NFS v4.1 write delegation feature.
nfsv4_fsid_change
string
added in 2.9.0 of netapp.ontap
    Choices:
  • enabled
  • disabled
status of if NFSv4 clients see change in FSID as they traverse filesystems.
nfsv4_id_domain
string
Name of the nfsv4_id_domain to use.
nfsv4_numeric_ids
string
added in 2.9.0 of netapp.ontap
    Choices:
  • enabled
  • disabled
status of NFSv4 numeric ID's.
ontapi
integer
The ontap api version to use
password
string
Password for the specified user.

aliases: pass
service_state
string
    Choices:
  • started
  • stopped
Whether the specified NFS should be enabled or disabled. Creates NFS service if doesnt exist.
showmount
string
added in 2.7.0 of netapp.ontap
    Choices:
  • enabled
  • disabled
Whether SVM allows showmount
state
string
    Choices:
  • present
  • absent
Whether NFS should exist or not.
tcp
string
    Choices:
  • enabled
  • disabled
Enable TCP (support from ONTAP 9.3 onward).
tcp_max_xfer_size
integer
added in 2.8.0 of netapp.ontap
TCP Maximum Transfer Size (bytes). The default value is 65536.
udp
string
    Choices:
  • enabled
  • disabled
Enable UDP (support from ONTAP 9.3 onward).
use_rest
string
Default:
"auto"
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
always -- will always use the REST API
never -- will always use the ZAPI
auto -- will try to use the REST Api
username
string
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required.
For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.
Two authentication methods are supported
1. basic authentication, using username and password,
2. SSL certificate authentication, using a ssl client cert file, and optionally a private key file.
To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.
vserver
string / required
Name of the vserver to use.
vstorage_state
string
    Choices:
  • enabled
  • disabled
status of vstorage_state.

Notes

Note

  • The modules prefixed with na\_ontap are built to support the ONTAP storage platform.

Examples

- name: change nfs status
  na_ontap_nfs:
    state: present
    service_state: stopped
    vserver: vs_hack
    nfsv3: disabled
    nfsv4: disabled
    nfsv41: enabled
    tcp: disabled
    udp: disabled
    vstorage_state: disabled
    nfsv4_id_domain: example.com
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"

Authors

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/netapp/ontap/na_ontap_nfs_module.html