W3cubDocs

/Ansible 2.10

vyos.vyos.vyos_l3_interfaces – L3 interfaces resource module

Note

This plugin is part of the vyos.vyos collection.

To install it use: ansible-galaxy collection install vyos.vyos.

To use it in a playbook, specify: vyos.vyos.vyos_l3_interfaces.

New in version 1.0.0: of vyos.vyos

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis

This module manages the L3 interface attributes on VyOS network devices.

Note

This module has a corresponding action plugin.

Parameters

Parameter				Choices/Defaults	Comments
config list / elements=dictionary					The provided L3 interfaces configuration.
	ipv4 list / elements=dictionary				List of IPv4 addresses of the interface.
		address string			IPv4 address of the interface.
	ipv6 list / elements=dictionary				List of IPv6 addresses of the interface.
		address string			IPv6 address of the interface.
	name string / required				Full name of the interface, e.g. eth0, eth1.
	vifs list / elements=dictionary				Virtual sub-interfaces L3 configurations.
		ipv4 list / elements=dictionary			List of IPv4 addresses of the virtual interface.
			address string		IPv4 address of the virtual interface.
		ipv6 list / elements=dictionary			List of IPv6 addresses of the virtual interface.
			address string		IPv6 address of the virtual interface.
		vlan_id integer			Identifier for the virtual sub-interface.
running_config string					This option is used only with state parsed. The value of this option should be the output received from the VyOS device by executing the command show configuration commands \| grep -e eth[2,3]. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string				Choices: merged ← replaced overridden deleted parsed gathered rendered	The state of the configuration after module completion.

Notes

Note

Tested against VyOS 1.1.8 (helium).
This module works with connection network_cli. See the VyOS OS Platform Options.

Examples

# Using merged
#
# Before state:
# -------------
#
# vyos:~$ show configuration commands | grep -e eth[2,3]
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 vif 101
# set interfaces ethernet eth3 vif 102

- name: Merge provided configuration with device configuration
  vyos.vyos.vyos_l3_interfaces:
    config:
    - name: eth2
      ipv4:
      - address: 192.0.2.10/28
      - address: 198.51.100.40/27
      ipv6:
      - address: 2001:db8:100::2/32
      - address: 2001:db8:400::10/32

    - name: eth3
      ipv4:
      - address: 203.0.113.65/26
      vifs:
      - vlan_id: 101
        ipv4:
        - address: 192.0.2.71/28
        - address: 198.51.100.131/25
      - vlan_id: 102
        ipv6:
        - address: 2001:db8:1000::5/38
        - address: 2001:db8:1400::3/38
    state: merged

# After state:
# -------------
#
# vyos:~$ show configuration commands | grep -e eth[2,3]
# set interfaces ethernet eth2 address '192.0.2.10/28'
# set interfaces ethernet eth2 address '198.51.100.40/27'
# set interfaces ethernet eth2 address '2001:db8:100::2/32'
# set interfaces ethernet eth2 address '2001:db8:400::10/32'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 address '203.0.113.65/26'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 vif 101 address '192.0.2.71/28'
# set interfaces ethernet eth3 vif 101 address '198.51.100.131/25'
# set interfaces ethernet eth3 vif 102 address '2001:db8:1000::5/38'
# set interfaces ethernet eth3 vif 102 address '2001:db8:1400::3/38'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::2/34'


# Using replaced
#
# Before state:
# -------------
#
# vyos:~$ show configuration commands | grep eth
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
# set interfaces ethernet eth0 smp-affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
# set interfaces ethernet eth1 address '192.0.2.14/24'
# set interfaces ethernet eth2 address '192.0.2.10/24'
# set interfaces ethernet eth2 address '192.0.2.11/24'
# set interfaces ethernet eth2 address '2001:db8::10/32'
# set interfaces ethernet eth2 address '2001:db8::11/32'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 address '198.51.100.10/24'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 vif 101 address '198.51.100.130/25'
# set interfaces ethernet eth3 vif 101 address '198.51.100.131/25'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::3/34'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::2/34'
#
- name: Replace device configurations of listed interfaces with provided configurations
  vyos.vyos.vyos_l3_interfaces:
    config:
    - name: eth2
      ipv4:
      - address: 192.0.2.10/24

    - name: eth3
      ipv6:
      - address: 2001:db8::11/32
    state: replaced

# After state:
# -------------
#
# vyos:~$ show configuration commands | grep eth
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
# set interfaces ethernet eth0 smp-affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
# set interfaces ethernet eth1 address '192.0.2.14/24'
# set interfaces ethernet eth2 address '192.0.2.10/24'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 address '2001:db8::11/32'
# set interfaces ethernet eth3 vif 101
# set interfaces ethernet eth3 vif 102


# Using overridden
#
# Before state
# --------------
#
# vyos@vyos-appliance:~$ show configuration commands | grep eth
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
# set interfaces ethernet eth0 smp-affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
# set interfaces ethernet eth1 address '192.0.2.14/24'
# set interfaces ethernet eth2 address '192.0.2.10/24'
# set interfaces ethernet eth2 address '192.0.2.11/24'
# set interfaces ethernet eth2 address '2001:db8::10/32'
# set interfaces ethernet eth2 address '2001:db8::11/32'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 address '198.51.100.10/24'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 vif 101 address '198.51.100.130/25'
# set interfaces ethernet eth3 vif 101 address '198.51.100.131/25'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::3/34'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::2/34'

- name: Overrides all device configuration with provided configuration
  vyos.vyos.vyos_l3_interfaces:
    config:
    - name: eth0
      ipv4:
      - address: dhcp
      ipv6:
      - address: dhcpv6
    state: overridden

# After state
# ------------
#
# vyos@vyos-appliance:~$ show configuration commands | grep eth
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 address 'dhcpv6'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
# set interfaces ethernet eth0 smp-affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 vif 101
# set interfaces ethernet eth3 vif 102


# Using deleted
#
# Before state
# -------------
# vyos@vyos-appliance:~$ show configuration commands | grep eth
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
# set interfaces ethernet eth0 smp-affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
# set interfaces ethernet eth1 address '192.0.2.14/24'
# set interfaces ethernet eth2 address '192.0.2.10/24'
# set interfaces ethernet eth2 address '192.0.2.11/24'
# set interfaces ethernet eth2 address '2001:db8::10/32'
# set interfaces ethernet eth2 address '2001:db8::11/32'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 address '198.51.100.10/24'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 vif 101 address '198.51.100.130/25'
# set interfaces ethernet eth3 vif 101 address '198.51.100.131/25'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::3/34'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::2/34'

- name: Delete L3 attributes of given interfaces (Note - This won't delete the interface
    itself)
  vyos.vyos.vyos_l3_interfaces:
    config:
    - name: eth1
    - name: eth2
    - name: eth3
    state: deleted

# After state
# ------------
# vyos@vyos-appliance:~$ show configuration commands | grep eth
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:f3:6c:b5'
# set interfaces ethernet eth0 smp_affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:ad:ef:65'
# set interfaces ethernet eth1 smp_affinity 'auto'
# set interfaces ethernet eth2 hw-id '08:00:27:ab:4e:79'
# set interfaces ethernet eth2 smp_affinity 'auto'
# set interfaces ethernet eth3 hw-id '08:00:27:17:3c:85'
# set interfaces ethernet eth3 smp_affinity 'auto'


# Using gathered
#
# Before state:
# -------------
#
# vyos:~$ show configuration commands | grep -e eth[2,3,0]
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:50:5e:19'
# set interfaces ethernet eth0 smp_affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 address '192.0.2.14/24'
# set interfaces ethernet eth2 address '192.0.2.11/24'
# set interfaces ethernet eth2 address '192.0.2.10/24'
# set interfaces ethernet eth2 address '2001:db8::10/32'
# set interfaces ethernet eth2 address '2001:db8::12/32'
#
- name: Gather listed l3 interfaces with provided configurations
  vyos.vyos.vyos_l3_interfaces:
    config:
    state: gathered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "gathered": [
#         {
#             "ipv4": [
#                 {
#                     "address": "192.0.2.11/24"
#                 },
#                 {
#                     "address": "192.0.2.10/24"
#                 }
#             ],
#             "ipv6": [
#                 {
#                     "address": "2001:db8::10/32"
#                 },
#                 {
#                     "address": "2001:db8::12/32"
#                 }
#             ],
#             "name": "eth2"
#         },
#         {
#             "ipv4": [
#                 {
#                     "address": "192.0.2.14/24"
#                 }
#             ],
#             "name": "eth1"
#         },
#         {
#             "ipv4": [
#                 {
#                     "address": "dhcp"
#                 }
#             ],
#             "name": "eth0"
#         }
#     ]
#
#
# After state:
# -------------
#
# vyos:~$ show configuration commands | grep -e eth[2,3]
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:50:5e:19'
# set interfaces ethernet eth0 smp_affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 address '192.0.2.14/24'
# set interfaces ethernet eth2 address '192.0.2.11/24'
# set interfaces ethernet eth2 address '192.0.2.10/24'
# set interfaces ethernet eth2 address '2001:db8::10/32'
# set interfaces ethernet eth2 address '2001:db8::12/32'


# Using rendered
#
#
- name: Render the commands for provided  configuration
  vyos.vyos.vyos_l3_interfaces:
    config:
    - name: eth1
      ipv4:
      - address: 192.0.2.14/24
    - name: eth2
      ipv4:
      - address: 192.0.2.10/24
      - address: 192.0.2.11/24
      ipv6:
      - address: 2001:db8::10/32
      - address: 2001:db8::12/32
    state: rendered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "rendered": [
#         "set interfaces ethernet eth1 address '192.0.2.14/24'",
#         "set interfaces ethernet eth2 address '192.0.2.11/24'",
#         "set interfaces ethernet eth2 address '192.0.2.10/24'",
#         "set interfaces ethernet eth2 address '2001:db8::10/32'",
#         "set interfaces ethernet eth2 address '2001:db8::12/32'"
#     ]


# Using parsed
#
#
- name: parse the provided running configuration
  vyos.vyos.vyos_l3_interfaces:
    running_config:
      "set interfaces ethernet eth0 address 'dhcp'
       set interfaces ethernet eth1 address '192.0.2.14/24'
       set interfaces ethernet eth2 address '192.0.2.10/24'
       set interfaces ethernet eth2 address '192.0.2.11/24'
       set interfaces ethernet eth2 address '2001:db8::10/32'
       set interfaces ethernet eth2 address '2001:db8::12/32'"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed": [
#         {
#             "ipv4": [
#                 {
#                     "address": "192.0.2.10/24"
#                 },
#                 {
#                     "address": "192.0.2.11/24"
#                 }
#             ],
#             "ipv6": [
#                 {
#                     "address": "2001:db8::10/32"
#                 },
#                 {
#                     "address": "2001:db8::12/32"
#                 }
#             ],
#             "name": "eth2"
#         },
#         {
#             "ipv4": [
#                 {
#                     "address": "192.0.2.14/24"
#                 }
#             ],
#             "name": "eth1"
#         },
#         {
#             "ipv4": [
#                 {
#                     "address": "dhcp"
#                 }
#             ],
#             "name": "eth0"
#         }
#     ]

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after list / elements=string	when changed	The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above.
before list / elements=string	always	The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list / elements=string	always	The set of commands pushed to the remote device. Sample: ['set interfaces ethernet eth1 192.0.2.14/2', 'set interfaces ethernet eth3 vif 101 address 198.51.100.130/25']

Authors

Nilashish Chakraborty (@NilashishC)
Rohit Thakur (@rohitthakur2590)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/vyos/vyos/vyos_l3_interfaces_module.html