W3cubDocs

/Ansible 2.10

wti.remote.cpm_snmp_config – Set network IPTables parameters in WTI OOB and PDU devices

Note

This plugin is part of the wti.remote collection.

To install it use: ansible-galaxy collection install wti.remote.

To use it in a playbook, specify: wti.remote.cpm_snmp_config.

New in version 2.10: of wti.remote

Synopsis

  • Set network IPTables parameters in WTI OOB and PDU devices

Parameters

Parameter Choices/Defaults Comments
authpass
list / elements=string
Sets the Authentication Password for SNMPv3 (V3 only).
authpriv
list / elements=string
Configures the Authentication and Privacy features for SNMPv3 communication, 0 = Auth/NoPriv, 1 = Auth/Priv (V3 only).
authproto
list / elements=string
Which authentication protocol will be used, 0 = MD5, 1 = SHA1 (V3 only).
clear
integer
    Choices:
  • 0
  • 1
Removes all the users for the protocol being defined before setting the newly defined entries.
contact
string
The name of the administrator responsible for SNMP issues.
cpm_password
string / required
This is the Password of the WTI device to send the module.
cpm_url
string / required
This is the URL of the WTI device to send the module.
cpm_username
string / required
This is the Username of the WTI device to send the module.
enable
integer
    Choices:
  • 0
  • 1
The activates SNMP polling for the specified interface and protocol.
index
list / elements=string
Index of the user being modified (V3 only).
interface
string
    Choices:
  • eth0
  • eth1
  • ppp0
The ethernet port for the SNMP we are defining.
location
string
The location of the SNMP Server.
privpass
list / elements=string
Sets the Privacy Password for SNMPv3 (V3 only) (V3 only).
privproto
list / elements=string
Which privacy protocol will be used, 0 = DES, 1 = AES128 (V3 only).
protocol
integer
    Choices:
  • 0
  • 1
The protocol that the SNMP entry should be applied. 0 = ipv4, 1 = ipv6.
readonly
integer
    Choices:
  • 0
  • 1
Controls the ability to change configuration parameters with SNMP.
rocommunity
string
Read Only Community Password, not used for SNMP V3.
rwcommunity
string
Read/Write Community Password, not used for SNMP V3.
systemname
string
The hostname of the WTI Device.
use_https
boolean
    Choices:
  • no
  • yes ←
Designates to use an https connection or http connection.
use_proxy
boolean
    Choices:
  • no ←
  • yes
Flag to control if the lookup will observe HTTP proxy environment variables when present.
username
list / elements=string
Sets the User Name for SNMPv3 access (V3 only).
validate_certs
boolean
    Choices:
  • no
  • yes ←
If false, SSL certificates will not be validated. This should only be used
on personally controlled sites using self-signed certificates.
version
integer
    Choices:
  • 0
  • 1
  • 2
Defined which version of SNMP the device will respond to 0 = V1/V2 Only, 1 = V3 Only, 2 = V1/V2/V3.

Notes

Note

  • Use groups/cpm in module_defaults to set common options used between CPM modules.

Examples

# Sets the device SNMP Parameters
- name: Set the an SNMP Parameter for a WTI device
  cpm_iptables_config:
    cpm_url: "nonexist.wti.com"
    cpm_username: "super"
    cpm_password: "super"
    interface: "eth0"
    use_https: true
    validate_certs: false
    protocol: 0
    clear: 1
    enable: 1
    readonly: 0
    version: 0
    rocommunity: "ropassword"
    rwcommunity: "rwpassword"

# Sets the device SNMP Parameters
- name: Set the SNMP Parameters a WTI device
  cpm_iptables_config:
    cpm_url: "nonexist.wti.com"
    cpm_username: "super"
    cpm_password: "super"
    use_https: true
    validate_certs: false
    version: 1
    index:
      - 1
      - 2
    username:
      - "username1"
      - "username2"
    authpriv:
      - 1
      - 1
    authpass:
      - "authpass1"
      - "uthpass2"
    authproto:
      - 1
      - 1
    privpass:
      - "authpass1"
      - "uthpass2"
    privproto:
      - 1
      - 1

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
data
complex
always
The output JSON returned from the commands sent
snmpaccess
dictionary
always
Current k/v pairs of interface info for the WTI device after module execution.

Sample:
[{'eth0': {'ietf-ipv4': {'clear': 1, 'enable': 0, 'readonly': 0, 'users': [{'authpass': 'testpass', 'authpriv': '1', 'authproto': '0', 'index': '1', 'privpass': 'privpass1', 'privproto': '0', 'username': 'username1'}], 'version': 0}}}]


Authors

  • Western Telematic Inc. (@wtinetworkgear)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/wti/remote/cpm_snmp_config_module.html