Note
This plugin is part of the arista.eos collection (version 1.3.0).
To install it use: ansible-galaxy collection install arista.eos.
To use it in a playbook, specify: arista.eos.eos_bgp_address_family.
New in version 1.4.0: of arista.eos
Note
This module has a corresponding action plugin.
| Parameter | Choices/Defaults | Comments | ||||
|---|---|---|---|---|---|---|
| config dictionary | Configurations for BGP address family. | |||||
| address_family list / elements=dictionary | Enable address family and enter its config mode | |||||
| afi string |
| address family. | ||||
| bgp_params dictionary | BGP parameters. | |||||
| additional_paths string |
| BGP additional-paths commands | ||||
| next_hop_address_family string |
| Next-hop address-family configuration | ||||
| next_hop_unchanged boolean |
| Preserve original nexthop while advertising routes to eBGP peers. | ||||
| redistribute_internal boolean |
| Redistribute internal BGP routes. | ||||
| route string | Configure route-map for route installation. | |||||
| graceful_restart boolean |
| Enable graceful restart mode. | ||||
| neighbor list / elements=dictionary | Configure routing for a network. | |||||
| activate boolean |
| Activate neighbor in the address family. | ||||
| additional_paths string |
| BGP additional-paths commands. | ||||
| default_originate dictionary | Originate default route to this neighbor. | |||||
| always boolean |
| Always originate default route to this neighbor. | ||||
| route_map string | Route map reference. | |||||
| encapsulation dictionary | Default transport encapsulation for neighbor. Applicable for evpn address-family. | |||||
| source_interface string | Source interface to update BGP next hop address. Applicable for mpls transport. | |||||
| transport string |
| MPLS/VXLAN transport. | ||||
| graceful_restart boolean |
| Enable graceful restart mode. | ||||
| next_hop_address_family string |
| Next-hop address-family configuration | ||||
| next_hop_unchanged boolean |
| Preserve original nexthop while advertising routes to eBGP peers. | ||||
| peer string | Neighbor address/ peer-group name. | |||||
| prefix_list dictionary | Prefix list reference. | |||||
| direction string |
| Configure an inbound/outbound prefix-list. | ||||
| name string | prefix list name. | |||||
| route_map dictionary | Route map reference. | |||||
| direction string |
| Configure an inbound/outbound route-map. | ||||
| name string | Route map name. | |||||
| weight integer | Weight to assign. | |||||
| network list / elements=dictionary | configure routing for network. | |||||
| address string | network address. | |||||
| route_map string | Route map reference. | |||||
| redistribute list / elements=dictionary | Redistribute routes in to BGP. | |||||
| isis_level string |
| Applicable for isis routes. Specify isis route level. | ||||
| ospf_route string |
| ospf route options. | ||||
| protocol string |
| Routes to be redistributed. | ||||
| route_map string | Route map reference. | |||||
| route_target dictionary | Route target | |||||
| mode string |
| route import or route export. | ||||
| target string | route target | |||||
| safi string |
| Address family type for ipv4. | ||||
| vrf string | name of the VRF in which BGP will be configured. | |||||
| as_number string | Autonomous system number. | |||||
| running_config string | This option is used only with state parsed. The value of this option should be the output received from the EOS device by executing the command show running-config | section bgp. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result. | |||||
| state string |
| The state the configuration should be left in. | ||||
Note
network_cli. See the EOS Platform Options.# Using merged
# Before state
# veos(config)#show running-config | section bgp
# veos(config)#
- name: Merge provided configuration with device configuration
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv4"
redistribute:
- protocol: "ospf3"
ospf_route: "external"
network:
- address: "1.1.1.0/24"
- address: "1.5.1.0/24"
route_map: "MAP01"
- afi: "ipv6"
bgp_params:
additional_paths: "receive"
neighbor:
- peer: "peer2"
default_originate:
always: True
- afi: "ipv6"
redistribute:
- protocol: "isis"
isis_level: "level-2"
route_target:
mode: "export"
target: "33:11"
vrf: "vrft"
state: merged
# After state:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 activate
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv6
# route-target export 33:11
# redistribute isis level-2
# veos(config-router-bgp)#
# Module Execution:
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ],
# "route_target": {
# "mode": "export",
# "target": "33:11"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {},
# "changed": true,
# "commands": [
# "router bgp 10",
# "address-family ipv4",
# "redistribute ospf3 match external",
# "network 1.1.1.0/24",
# "network 1.5.1.0/24 route-map MAP01",
# "exit",
# "address-family ipv6",
# "neighbor peer2 default-originate always",
# "bgp additional-paths receive",
# "exit",
# "vrf vrft",
# "address-family ipv6",
# "redistribute isis level-2",
# "route-target export 33:11",
# "exit",
# "exit"
# ],
# Using replaced:
# Before State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 activate
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv6
# route-target export 33:11
# redistribute isis level-2
# veos(config-router-bgp)#
#
- name: Replace
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv6"
vrf: "vrft"
redistribute:
- protocol: "ospf3"
ospf_route: "external"
- afi: "ipv6"
redistribute:
- protocol: "isis"
isis_level: "level-2"
state: replaced
# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# neighbor peer2 default-originate always
# redistribute isis level-2
# !
# vrf vrft
# address-family ipv6
# redistribute ospf3 match external
# veos(config-router-bgp)#
#
#
# # Module Execution:
#
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "neighbor": [
# {
# "activate": true,
# "peer": "1.1.1.1"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {
# "address_family": [
# {
# "afi": "ipv4",
# "neighbor": [
# {
# "activate": true,
# "peer": "1.1.1.1"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "activate": true,
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ],
# "route_target": {
# "mode": "export",
# "target": "33:11"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "changed": true,
# "commands": [
# "router bgp 10",
# "vrf vrft",
# "address-family ipv6",
# "redistribute ospf3 match external",
# "no redistribute isis level-2",
# "no route-target export 33:11",
# "exit",
# "exit",
# "address-family ipv6",
# "redistribute isis level-2",
# "no neighbor peer2 activate",
# "no bgp additional-paths receive",
# "exit"
# ],
# Using overridden (overriding af at global context):
# Before state:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# neighbor peer2 default-originate always
# redistribute isis level-2
# !
# vrf vrft
# address-family ipv6
# redistribute ospf3 match external
# veos(config-router-bgp)#
- name: Overridden
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv4"
bgp_params:
additional_paths: "receive"
neighbor:
- peer: "peer2"
default_originate:
always: True
state: overridden
# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv6
# redistribute ospf3 match external
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {
# "address_family": [
# {
# "afi": "ipv4",
# "neighbor": [
# {
# "activate": true,
# "peer": "1.1.1.1"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "changed": true,
# "commands": [
# "router bgp 10",
# "address-family ipv4",
# "no redistribute ospf3 match external",
# "no network 1.1.1.0/24",
# "no network 1.5.1.0/24 route-map MAP01",
# "neighbor peer2 default-originate always",
# "no neighbor 1.1.1.1 activate",
# "bgp additional-paths receive",
# "exit",
# "no address-family ipv6"
# ],
# using Overridden (overridding af in vrf context):
# Before State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# no neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv6
# route-target export 33:11
# redistribute isis level-2
# redistribute ospf3 match external
# veos(config-router-bgp)#
- name: Overridden
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv4"
bgp_params:
additional_paths: "receive"
neighbor:
- peer: "peer2"
default_originate:
always: True
vrf: vrft
state: overridden
# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# },
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "route_target": {
# "mode": "export",
# "target": "33:11"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "changed": true,
# "commands": [
# "router bgp 10",
# "vrf vrft",
# "address-family ipv4",
# "neighbor peer2 default-originate always",
# "bgp additional-paths receive",
# "exit",
# "exit",
# " vrf vrft",
# "no address-family ipv6"
# ],
# Using Deleted:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# no neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# veos(config-router-bgp)#
- name: Delete
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv6"
vrf: "vrft"
- afi: "ipv6"
state: deleted
# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# no neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# Using parsed:
# parsed_bgp_address_family.cfg :
# router bgp 10
# neighbor n2 peer-group
# neighbor n2 next-hop-unchanged
# neighbor n2 maximum-routes 12000
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# redistribute ospf3 match external
# !
# address-family ipv6
# no bgp additional-paths receive
# neighbor n2 next-hop-unchanged
# redistribute isis level-2
# !
# vrf bgp_10
# ip access-group acl01
# ucmp fec threshold trigger 33 clear 22 warning-only
# !
# address-family ipv4
# route-target import 20:11
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# !
# address-family ipv6
# redistribute ospf3 match external
- name: parse configs
arista.eos.eos_bgp_address_family:
running_config: "{{ lookup('file', './parsed_bgp_address_family.cfg') }}"
state: parsed
# Module Execution:
# "parsed": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "neighbor": [
# {
# "next_hop_unchanged": true,
# "peer": "n2"
# }
# ],
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ]
# },
# {
# "afi": "ipv4",
# "route_target": {
# "mode": "import",
# "target": "20:11"
# },
# "vrf": "bgp_10"
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# }
# }
# Using gathered:
# Device config:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# no neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# veos(config-router-bgp)#
- name: gather configs
arista.eos.eos_bgp_address_family:
state: gathered
# Module Execution:
# "gathered": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# using rendered:
- name: Render
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv4"
redistribute:
- protocol: "ospf3"
ospf_route: "external"
network:
- address: "1.1.1.0/24"
- address: "1.5.1.0/24"
route_map: "MAP01"
- afi: "ipv6"
bgp_params:
additional_paths: "receive"
neighbor:
- peer: "peer2"
default_originate:
always: True
- afi: "ipv6"
redistribute:
- protocol: "isis"
isis_level: "level-2"
route_target:
mode: "export"
target: "33:11"
vrf: "vrft"
state: rendered
# Module Execution:
# "rendered": [
# "router bgp 10",
# "address-family ipv4",
# "redistribute ospf3 match external",
# "network 1.1.1.0/24",
# "network 1.5.1.0/24 route-map MAP01",
# "exit",
# "address-family ipv6",
# "neighbor peer2 default-originate always",
# "bgp additional-paths receive",
# "exit",
# "vrf vrft",
# "address-family ipv6",
# "redistribute isis level-2",
# "route-target export 33:11",
# "exit",
# "exit"
# ]
#
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/arista/eos/eos_bgp_address_family_module.html