W3cubDocs

/Ansible 2.11

arista.eos.eos_command – Run arbitrary commands on an Arista EOS device

Note

This plugin is part of the arista.eos collection (version 1.3.0).

To install it use: ansible-galaxy collection install arista.eos.

To use it in a playbook, specify: arista.eos.eos_command.

New in version 1.0.0: of arista.eos

Synopsis

  • Sends an arbitrary set of commands to an EOS node and returns the results read from the device. This module includes an argument that will cause the module to wait for a specific condition before returning or timing out if the condition is not met.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
commands
list / elements=raw / required
The commands to send to the remote EOS device over the configured provider. The resulting output from the command is returned. If the wait_for argument is provided, the module is not returned until the condition is satisfied or the number of retries has been exceeded.
If a command sent to the device requires answering a prompt, it is possible to pass a dict containing command, answer and prompt. Common answers are 'y' or "\r" (carriage return, must be double quotes). Refer below examples.
interval
integer
Default:
1
Configures the interval in seconds to wait between retries of the command. If the command does not pass the specified conditional, the interval indicates how to long to wait before trying the command again.
match
string
    Choices:
  • any
  • all ←
The match argument is used in conjunction with the wait_for argument to specify the match policy. Valid values are all or any. If the value is set to all then all conditionals in the wait_for must be satisfied. If the value is set to any then only one of the values must be satisfied.
provider
dictionary
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli.
Starting with Ansible 2.6 we recommend using connection: httpapi for eAPI.
This option will be removed in a release after 2022-06-01.
For more information please see the EOS Platform Options guide.
A dict object containing connection details.
auth_pass
string
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
authorize
boolean
    Choices:
  • no ←
  • yes
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
host
string
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
string
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or eapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
integer
Default:
0
Specifies the port to use when building the connection to the remote device. This value applies to either cli or eapi.
The port value will default to the appropriate transport common port if none is provided in the task (cli=22, http=80, https=443).
ssh_keyfile
path
Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout
integer
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport
string
    Choices:
  • cli ←
  • eapi
Configures the transport connection to use when connecting to the remote device.
use_proxy
boolean
    Choices:
  • no
  • yes ←
If no, the environment variables http_proxy and https_proxy will be ignored.
use_ssl
boolean
    Choices:
  • no
  • yes ←
Configures the transport to use SSL if set to yes only when the transport=eapi. If the transport argument is not eapi, this value is ignored.
username
string
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the eAPI authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
validate_certs
boolean
    Choices:
  • no
  • yes ←
If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not eapi, this value is ignored.
retries
integer
Default:
10
Specifies the number of retries a command should be tried before it is considered failed. The command is run on the target device every retry and evaluated against the wait_for conditionals.
wait_for
list / elements=string
Specifies what to evaluate from the output of the command and what conditionals to apply. This argument will cause the task to wait for a particular conditional to be true before moving forward. If the conditional is not true by the configured retries, the task fails. Note - With wait_for the value in result['stdout'] can be accessed using result, that is to access result['stdout'][0] use result[0] See examples.

aliases: waitfor

Notes

Note

Examples

- name: run show version on remote devices
  arista.eos.eos_command:
    commands: show version

- name: run show version and check to see if output contains Arista
  arista.eos.eos_command:
    commands: show version
    wait_for: result[0] contains Arista

- name: run multiple commands on remote nodes
  arista.eos.eos_command:
    commands:
    - show version
    - show interfaces

- name: run multiple commands and evaluate the output
  arista.eos.eos_command:
    commands:
    - show version
    - show interfaces
    wait_for:
    - result[0] contains Arista
    - result[1] contains Loopback0

- name: run commands and specify the output format
  arista.eos.eos_command:
    commands:
    - command: show version
      output: json

- name: using cli transport, check whether the switch is in maintenance mode
  arista.eos.eos_command:
    commands: show maintenance
    wait_for: result[0] contains 'Under Maintenance'

- name: using cli transport, check whether the switch is in maintenance mode using
    json output
  arista.eos.eos_command:
    commands: show maintenance | json
    wait_for: result[0].units.System.state eq 'underMaintenance'

- name: using eapi transport check whether the switch is in maintenance, with 8 retries
    and 2 second interval between retries
  arista.eos.eos_command:
    commands: show maintenance
    wait_for: result[0]['units']['System']['state'] eq 'underMaintenance'
    interval: 2
    retries: 8
    provider:
      transport: eapi

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
failed_conditions
list / elements=string
failed
The list of conditionals that have failed

Sample:
['...', '...']
stdout
list / elements=string
always apart from low level errors (such as action plugin)
The set of responses from the commands

Sample:
['...', '...']
stdout_lines
list / elements=string
always apart from low level errors (such as action plugin)
The value of stdout split into a list

Sample:
[['...', '...'], ['...'], ['...']]


Authors

  • Peter Sprygada (@privateip)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/arista/eos/eos_command_module.html