W3cubDocs

/Ansible 2.11

cisco.aci.aci_static_node_mgmt_address – In band or Out of band management IP address

Note

This plugin is part of the cisco.aci collection (version 2.0.0).

To install it use: ansible-galaxy collection install cisco.aci.

To use it in a playbook, specify: cisco.aci.aci_static_node_mgmt_address.

Synopsis
Parameters
See Also
Examples
Return Values

Synopsis

Cisco ACI Fabric Node IP address

Parameters

Parameter	Choices/Defaults	Comments
annotation string		User-defined string for annotating an object. If the value is not specified in the task, the value of environment variable `ACI_ANNOTATION` will be used instead.
certificate_name string		The X.509 certificate name attached to the APIC AAA user used for signature-based authentication. If a `private_key` filename was provided, this defaults to the `private_key` basename, without extension. If PEM-formatted content was provided for `private_key`, this defaults to the `username` value. If the value is not specified in the task, the value of environment variable `ACI_CERTIFICATE_NAME` will be used instead. aliases: cert_name
epg string		The name of the end point group
host string / required		IP Address or hostname of APIC resolvable by Ansible control host. If the value is not specified in the task, the value of environment variable `ACI_HOST` will be used instead. aliases: hostname
ipv4_address string		ipv4 address of in band/out of band mgmt aliases: ip
ipv4_gw string		Gateway address of in band / out of band mgmt network aliases: gw
ipv6_address string		ipv6 address of in band/out of band mgmt aliases: ipv6
ipv6_gw string		GW address of in band/out of band mgmt
node_id integer		ACI Fabric's node id of a leaf, spine or APIC
output_level string	Choices: debug info normal ←	Influence the output of this ACI module. `normal` means the standard output, incl. `current` dict `info` adds informational output, incl. `previous`, `proposed` and `sent` dicts `debug` adds debugging output, incl. `filter_string`, `method`, `response`, `status` and `url` information If the value is not specified in the task, the value of environment variable `ACI_OUTPUT_LEVEL` will be used instead.
output_path string		Path to a file that will be used to dump the ACI JSON configuration objects generated by the module. If the value is not specified in the task, the value of environment variable `ACI_OUTPUT_PATH` will be used instead.
owner_key string		User-defined string for the ownerKey attribute of an ACI object. This attribute represents a key for enabling clients to own their data for entity correlation. If the value is not specified in the task, the value of environment variable `ACI_OWNER_KEY` will be used instead.
owner_tag string		User-defined string for the ownerTag attribute of an ACI object. This attribute represents a tag for enabling clients to add their own data. For example, to indicate who created this object. If the value is not specified in the task, the value of environment variable `ACI_OWNER_TAG` will be used instead.
password string		The password to use for authentication. This option is mutual exclusive with `private_key`. If `private_key` is provided too, it will be used instead. If the value is not specified in the task, the value of environment variables `ACI_PASSWORD` or `ANSIBLE_NET_PASSWORD` will be used instead.
pod_id integer		The pod number of the leaf, spine or APIC
port integer		Port number to be used for REST connection. The default value depends on parameter `use_ssl`. If the value is not specified in the task, the value of environment variable `ACI_PORT` will be used instead.
private_key string		Either a PEM-formatted private key file or the private key content used for signature-based authentication. This value also influences the default `certificate_name` that is used. This option is mutual exclusive with `password`. If `password` is provided too, it will be ignored. If the value is not specified in the task, the value of environment variable `ACI_PRIVATE_KEY` will be used instead. aliases: cert_key
state string	Choices: absent present ← query	Use `present` or `absent` for adding or removing. Use `query` for listing an object or multiple objects.
timeout integer	Default: 30	The socket level timeout in seconds. If the value is not specified in the task, the value of environment variable `ACI_TIMEOUT` will be used instead.
type string / required	Choices: in_band out_of_band	type of management interface
use_proxy boolean	Choices: no yes ←	If `no`, it will not use a proxy, even if one is defined in an environment variable on the target hosts. If the value is not specified in the task, the value of environment variable `ACI_USE_PROXY` will be used instead.
use_ssl boolean	Choices: no yes ←	If `no`, an HTTP connection will be used instead of the default HTTPS connection. If the value is not specified in the task, the value of environment variable `ACI_USE_SSL` will be used instead.
username string	Default: "admin"	The username to use for authentication. If the value is not specified in the task, the value of environment variables `ACI_USERNAME` or `ANSIBLE_NET_USERNAME` will be used instead. aliases: user
validate_certs boolean	Choices: no yes ←	If `no`, SSL certificates will not be validated. This should only set to `no` when used on personally controlled sites using self-signed certificates. If the value is not specified in the task, the value of environment variable `ACI_VALIDATE_CERTS` will be used instead.

Examples

- name: Add ipv4 address to in band mgmt interface
  cisco.aci.aci_static_node_mgmt_address:
    host: "Host IP"
    username: admin
    password: SomeSecretePassword
    epg: default
    pod_id: 1
    type: in_band
    node_id: 1102
    ipv4_address: "3.1.1.2/24"
    ipv4_gw: "3.1.1.1"
    state: present
  delegate_to: localhost

- name: Add ipv4 address to out of band mgmt interface
  cisco.aci.aci_static_node_mgmt_address:
    host: "Host IP"
    username: admin
    password: SomeSecretePassword
    epg: default
    pod_id: 1
    band_type: out_of_band
    node_id: 1102
    ipv4_address: "3.1.1.2/24"
    ipv4_gw: "3.1.1.1"
    state: present
  delegate_to: localhost

- name: Remove ipv4 address to in band mgmt interface
  cisco.aci.aci_static_node_mgmt_address:
    host: "Host IP"
    username: admin
    password: SomeSecretePassword
    epg: default
    pod_id: 1
    type: in_band
    node_id: 1102
    ipv4_address: "3.1.1.2/24"
    ipv4_gw: "3.1.1.1"
    state: absent
  delegate_to: localhost

- name: Query the in band mgmt ipv4 address
  cisco.aci.aci_static_node_mgmt_address:
    host: "Host IP"
    username: admin
    password: SomeSecretePassword
    epg: default
    pod_id: 1
    type: in_band
    node_id: 1102
    ipv4_address: "3.1.1.2/24"
    ipv4_gw: "3.1.1.1"
    state: query
  delegate_to: localhost

- name: Query all addresses in epg out of band25wf
  cisco.aci.aci_static_node_mgmt_address:
    host: "Host IP"
    username: admin
    password: SomeSecretePassword
    epg: default
    type: out_of_band
    state: query
  delegate_to: localhost

- name: Query all in band addresses
  cisco.aci.aci_static_node_mgmt_address:
    host: "Host IP"
    username: admin
    password: SomeSecretePassword
    type: in_band
    state: query
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
current list / elements=string	success	The existing configuration from the APIC after the module has finished Sample: [{'fvTenant': {'attributes': {'descr': 'Production environment', 'dn': 'uni/tn-production', 'name': 'production', 'nameAlias': '', 'ownerKey': '', 'ownerTag': ''}}}]
error dictionary	failure	The error information as returned from the APIC Sample: {'code': '122', 'text': 'unknown managed object class foo'}
filter_string string	failure or debug	The filter string used for the request Sample: ?rsp-prop-include=config-only
method string	failure or debug	The HTTP method used for the request to the APIC Sample: POST
previous list / elements=string	info	The original configuration from the APIC before the module has started Sample: [{'fvTenant': {'attributes': {'descr': 'Production', 'dn': 'uni/tn-production', 'name': 'production', 'nameAlias': '', 'ownerKey': '', 'ownerTag': ''}}}]
proposed dictionary	info	The assembled configuration from the user-provided parameters Sample: {'fvTenant': {'attributes': {'descr': 'Production environment', 'name': 'production'}}}
raw string	parse error	The raw output returned by the APIC REST API (xml or json) Sample: <?xml version="1.0" encoding="UTF-8"?><imdata totalCount="1"><error code="122" text="unknown managed object class "/></imdata>
response string	failure or debug	The HTTP response from the APIC Sample: class_map (30 bytes)
sent list / elements=string	info	The actual/minimal configuration pushed to the APIC Sample: {'fvTenant': {'attributes': {'descr': 'Production environment'}}}
status integer	failure or debug	The HTTP status from the APIC Sample: 200
url string	failure or debug	The HTTP url used for the request to the APIC Sample: https://10.11.12.13/api/mo/uni/tn-production.json

Authors

Sudhakar Shet Kudtarkar (@kudtarkar1)
Lionel Hercot (@lhercot)
Shreyas Srish (@shrsr)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/cisco/aci/aci_static_node_mgmt_address_module.html

cisco.aci.aci_static_node_mgmt_address – In band or Out of band management IP address

Synopsis

Parameters

See Also

Examples

Return Values

Authors