Note
This plugin is part of the cisco.ios collection (version 1.3.0).
To install it use: ansible-galaxy collection install cisco.ios.
To use it in a playbook, specify: cisco.ios.ios_l3_interface.
New in version 1.0.0: of cisco.ios
major release after 2022-06-01
Newer and updated modules released with more functionality in Ansible 2.9
ios_l3_interfaces
Note
This module has a corresponding action plugin.
| Parameter | Choices/Defaults | Comments | |
|---|---|---|---|
| aggregate list / elements=dictionary | List of Layer-3 interfaces definitions. Each of the entry in aggregate list should define name of interface name and a optional ipv4 or ipv6 address. | ||
| ipv4 string | IPv4 address to be set for the Layer-3 interface mentioned in name option. The address format is <ipv4 address>/<mask>, the mask is number in range 0-32 eg. 192.168.0.1/24 | ||
| ipv6 string | IPv6 address to be set for the Layer-3 interface mentioned in name option. The address format is <ipv6 address>/<mask>, the mask is number in range 0-128 eg. fd5d:12c9:2201:1::1/64 | ||
| name string / required | Name of the Layer-3 interface to be configured eg. GigabitEthernet0/2 | ||
| state string |
| State of the Layer-3 interface configuration. It indicates if the configuration should be present or absent on remote device. | |
| ipv4 string | IPv4 address to be set for the Layer-3 interface mentioned in name option. The address format is <ipv4 address>/<mask>, the mask is number in range 0-32 eg. 192.168.0.1/24 | ||
| ipv6 string | IPv6 address to be set for the Layer-3 interface mentioned in name option. The address format is <ipv6 address>/<mask>, the mask is number in range 0-128 eg. fd5d:12c9:2201:1::1/64 | ||
| name string | Name of the Layer-3 interface to be configured eg. GigabitEthernet0/2 | ||
| provider dictionary | Deprecated Starting with Ansible 2.5 we recommend using connection: network_cli.For more information please see the IOS Platform Options guide. A dict object containing connection details. | ||
| auth_pass string | Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead. | ||
| authorize boolean |
| Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead. | |
| host string | Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. | ||
| password string | Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead. | ||
| port integer | Specifies the port to use when building the connection to the remote device. | ||
| ssh_keyfile path | Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead. | ||
| timeout integer | Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. | ||
| username string | Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead. | ||
| state string |
| State of the Layer-3 interface configuration. It indicates if the configuration should be present or absent on remote device. | |
Note
- name: Remove GigabitEthernet0/3 IPv4 and IPv6 address
cisco.ios.ios_l3_interface:
name: GigabitEthernet0/3
state: absent
- name: Set GigabitEthernet0/3 IPv4 address
cisco.ios.ios_l3_interface:
name: GigabitEthernet0/3
ipv4: 192.168.0.1/24
- name: Set GigabitEthernet0/3 IPv6 address
cisco.ios.ios_l3_interface:
name: GigabitEthernet0/3
ipv6: fd5d:12c9:2201:1::1/64
- name: Set GigabitEthernet0/3 in dhcp
cisco.ios.ios_l3_interface:
name: GigabitEthernet0/3
ipv4: dhcp
ipv6: dhcp
- name: Set interface Vlan1 (SVI) IPv4 address
cisco.ios.ios_l3_interface:
name: Vlan1
ipv4: 192.168.0.5/24
- name: Set IP addresses on aggregate
cisco.ios.ios_l3_interface:
aggregate:
- name: GigabitEthernet0/3
ipv4: 192.168.2.10/24
- name: GigabitEthernet0/3
ipv4: 192.168.3.10/24
ipv6: fd5d:12c9:2201:1::1/64
- name: Remove IP addresses on aggregate
cisco.ios.ios_l3_interface:
aggregate:
- name: GigabitEthernet0/3
ipv4: 192.168.2.10/24
- name: GigabitEthernet0/3
ipv4: 192.168.3.10/24
ipv6: fd5d:12c9:2201:1::1/64
state: absent
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| commands list / elements=string | always, except for the platforms that use Netconf transport to manage the device. | The list of configuration mode commands to send to the device Sample: ['interface GigabitEthernet0/2', 'ip address 192.168.0.1 255.255.255.0', 'ipv6 address fd5d:12c9:2201:1::1/64'] |
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/cisco/ios/ios_l3_interface_module.html