W3cubDocs

/Ansible 2.11

cisco.iosxr.iosxr_l3_interfaces – L3 interfaces resource module

Note

This plugin is part of the cisco.iosxr collection (version 1.2.1).

To install it use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_l3_interfaces.

New in version 1.0.0: of cisco.iosxr

Synopsis

  • This module provides declarative management of Layer-3 interface on Cisco IOS-XR devices.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
config
list / elements=dictionary
A dictionary of Layer-3 interface options
ipv4
list / elements=dictionary
IPv4 address to be set for the Layer-3 interface mentioned in name option.
The address format is <ipv4 address>/<mask>, the mask is number in range 0-32 eg. 192.168.0.1/24
address
string
Configures the IPv4 address for Interface.
secondary
boolean
    Choices:
  • no
  • yes
Configures the IP address as a secondary address.
ipv6
list / elements=dictionary
IPv6 address to be set for the Layer-3 interface mentioned in name option.
The address format is <ipv6 address>/<mask>, the mask is number in range 0-128 eg. fd5d:12c9:2201:1::1/64
address
string
Configures the IPv6 address for Interface.
name
string / required
Full name of the interface excluding any logical unit number, i.e. GigabitEthernet0/1.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the IOS-XR device by executing the command show running-config interface.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged
  • replaced
  • overridden
  • deleted
  • parsed
  • rendered
  • gathered
The state of the configuration after module completion

Notes

Note

Examples

# Using merged

# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  ipv4 address 192.168.0.2 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
# !
# interface GigabitEthernet0/0/0/4
#  ipv6 address fd5d:12c9:2201:1::1/64
#  shutdown
# !

- name: Merge provided configuration with device configuration
  cisco.iosxr.iosxr_l3_interfaces:
    config:
    - name: GigabitEthernet0/0/0/2
      ipv4:
      - address: 192.168.0.1/24
    - name: GigabitEthernet0/0/0/3
      ipv4:
      - address: 192.168.2.1/24
        secondary: true
    state: merged

# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  ipv4 address 192.168.0.1 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  ipv4 address 192.168.1.0 255.255.255.0
#  ipv4 address 192.168.2.1 255.255.255.0 secondary
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
# !
# interface GigabitEthernet0/0/0/4
#  ipv6 address fd5d:12c9:2201:1::1/64
#  shutdown
# !

# Using overridden

# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  ipv4 address 192.168.0.1 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  ipv4 address 192.168.1.0 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
# !
# interface GigabitEthernet0/0/0/4
#  ipv6 address fd5d:12c9:2201:1::1/64
#  shutdown
# !

- name: Override device configuration of all interfaces with provided configuration
  cisco.iosxr.iosxr_l3_interfaces:
    config:
    - name: GigabitEthernet0/0/0/3
      ipv4:
      - address: 192.168.0.1/24
    - name: GigabitEthernet0/0/0/3.700
      ipv4:
      - address: 192.168.0.2/24
      - address: 192.168.2.1/24
        secondary: true
    state: overridden

# After state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  ipv4 address 192.168.0.1 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
#  ipv4 address 192.168.0.2 255.255.255.0
#  ipv4 address 192.168.2.1 255.255.255.0 secondary
# !
# interface GigabitEthernet0/0/0/4
#  shutdown
# !

# Using replaced

# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  ipv4 address 192.168.0.2 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
#  ipv4 address 192.168.0.1 255.255.255.0
# !
# interface GigabitEthernet0/0/0/4
#  ipv6 address fd5d:12c9:2201:1::1/64
#  shutdown
# !

- name: Replaces device configuration of listed interfaces with provided configuration
  cisco.iosxr.iosxr_l3_interfaces:
    config:
    - name: GigabitEthernet0/0/0/3
      ipv6:
      - address: fd5d:12c9:2201:1::1/64
    - name: GigabitEthernet0/0/0/4
      ipv4:
      - address: 192.168.0.2/24
    state: replaced

# After state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  ipv6 address fd5d:12c9:2201:1::1/64
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
#  ipv4 address 192.168.0.1 255.255.255.0
# !
# interface GigabitEthernet0/0/0/4
#  ipv4 address 192.168.0.2 255.255.255.0
#  shutdown
# !

# Using deleted

# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  ipv4 address 192.168.2.1 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  ipv4 address 192.168.3.1 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  ipv4 address 192.168.0.2 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
#  ipv4 address 192.168.0.1 255.255.255.0
# !
# interface GigabitEthernet0/0/0/4
#  ipv6 address fd5d:12c9:2201:1::1/64
#  shutdown
# !

- name: "Delete L3 attributes of given interfaces (Note: This won't delete the interface itself)"
  cisco.iosxr.iosxr_l3_interfaces:
    config:
    - name: GigabitEthernet0/0/0/3
    - name: GigabitEthernet0/0/0/4
    - name: GigabitEthernet0/0/0/3.700
    state: deleted

# After state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  ipv4 address 192.168.2.1 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  ipv4 address 192.168.3.1 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
# !
# interface GigabitEthernet0/0/0/4
#  shutdown
# !

# Using Deleted without any config passed
# "(NOTE: This will delete all of configured resource module attributes from each configured interface)"

# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  ipv4 address 192.168.2.1 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  ipv4 address 192.168.3.1 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  ipv4 address 192.168.0.2 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
#  ipv4 address 192.168.0.1 255.255.255.0
# !
# interface GigabitEthernet0/0/0/4
#  ipv6 address fd5d:12c9:2201:1::1/64
#  shutdown
# !


- name: "Delete L3 attributes of all interfaces (Note: This won't delete the interface itself)"
  cisco.iosxr.iosxr_l3_interfaces:
    state: deleted

# After state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
# !
# interface GigabitEthernet0/0/0/4
#  shutdown
# !


# Using parsed
# parsed.cfg
# ------------
#
# nterface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 10.8.38.70 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
#  description Configured and Merged by Ansible-Network
#  mtu 66
#  ipv4 address 192.0.2.1 255.255.255.0
#  ipv4 address 192.0.2.2 255.255.255.0 secondary
#  ipv6 address 2001:db8:0:3::/64
#  duplex half
# !
# interface GigabitEthernet0/0/0/1
#  description Configured and Merged by Ansible-Network
#  mtu 66
#  speed 100
#  duplex full
#  dot1q native vlan 10
#  l2transport
#   l2protocol cdp forward
#   l2protocol pvst tunnel
#   propagate remote-status
#  !
# !
# interface GigabitEthernet0/0/0/3
#  ipv4 address 192.0.22.1 255.255.255.0
#  ipv4 address 192.0.23.1 255.255.255.0
# !
# - name: Convert L3 interfaces config to argspec without connecting to the appliance
#   cisco.iosxr.iosxr_l3_interfaces:
#     running_config: "{{ lookup('file', './parsed.cfg') }}"
#     state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": [
#         {
#             "ipv4": [
#                 {
#                     "address": "192.0.2.1 255.255.255.0"
#                 },
#                 {
#                     "address": "192.0.2.2 255.255.255.0",
#                     "secondary": true
#                 }
#             ],
#             "ipv6": [
#                 {
#                     "address": "2001:db8:0:3::/64"
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/0"
#         },
#         {
#             "name": "GigabitEthernet0/0/0/1"
#         },
#         {
#             "ipv4": [
#                 {
#                     "address": "192.0.22.1 255.255.255.0"
#                 },
#                 {
#                     "address": "192.0.23.1 255.255.255.0"
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/3"
#         }
#     ]


# Using rendered
- name: Render platform specific commands from task input using rendered state
  cisco.iosxr.iosxr_l3_interfaces:
    config:

    - name: GigabitEthernet0/0/0/0
      ipv4:

      - address: 198.51.100.1/24

    - name: GigabitEthernet0/0/0/1
      ipv6:

      - address: 2001:db8:0:3::/64
      ipv4:

      - address: 192.0.2.1/24

      - address: 192.0.2.2/24
        secondary: true
    state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": [
#         "interface GigabitEthernet0/0/0/0",
#         "ipv4 address 198.51.100.1 255.255.255.0",
#         "interface GigabitEthernet0/0/0/1",
#         "ipv4 address 192.0.2.2 255.255.255.0 secondary",
#         "ipv4 address 192.0.2.1 255.255.255.0",
#         "ipv6 address 2001:db8:0:3::/64"
#     ]
# Using gathered
# Before state:
# ------------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config  interface
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 10.8.38.70 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
#  description Configured and Merged by Ansible-Network
#  mtu 66
#  ipv4 address 192.0.2.1 255.255.255.0
#  ipv4 address 192.0.2.2 255.255.255.0 secondary
#  ipv6 address 2001:db8:0:3::/64
#  duplex half
# !
# interface GigabitEthernet0/0/0/1
#  description Configured and Merged by Ansible-Network
#  mtu 66
#  speed 100
#  duplex full
#  dot1q native vlan 10
#  l2transport
#   l2protocol cdp forward
#   l2protocol pvst tunnel
#   propagate remote-status
#  !
# !
# interface GigabitEthernet0/0/0/3
#  shutdown
# !
# interface GigabitEthernet0/0/0/4
#  shutdown
#  dot1q native vlan 40
# !
- name: Gather IOSXR l3 interfaces as in given arguments
  cisco.iosxr.iosxr_l3_interfaces:
    config:
    state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": [
#         {
#             "name": "Loopback888"
#         },
#         {
#             "ipv4": [
#                 {
#                     "address": "192.0.2.1 255.255.255.0"
#                 },
#                 {
#                     "address": "192.0.2.2 255.255.255.0",
#                     "secondary": true
#                 }
#             ],
#             "ipv6": [
#                 {
#                     "address": "2001:db8:0:3::/64"
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/0"
#         },
#         {
#             "name": "GigabitEthernet0/0/0/1"
#         },
#         {
#             "name": "GigabitEthernet0/0/0/3"
#         },
#         {
#             "name": "GigabitEthernet0/0/0/4"
#         }
#     ]
# After state:
# ------------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config  interface
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 10.8.38.70 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
#  description Configured and Merged by Ansible-Network
#  mtu 66
#  ipv4 address 192.0.2.1 255.255.255.0
#  ipv4 address 192.0.2.2 255.255.255.0 secondary
#  ipv6 address 2001:db8:0:3::/64
#  duplex half
# !
# interface GigabitEthernet0/0/0/1
#  description Configured and Merged by Ansible-Network
#  mtu 66
#  speed 100
#  duplex full
#  dot1q native vlan 10
#  l2transport
#   l2protocol cdp forward
#   l2protocol pvst tunnel
#   propagate remote-status
#  !
# !
# interface GigabitEthernet0/0/0/3
#  shutdown
# !
# interface GigabitEthernet0/0/0/4
#  shutdown
#  dot1q native vlan 40
# !

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list / elements=string
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list / elements=string
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list / elements=string
always
The set of commands pushed to the remote device

Sample:
['interface GigabitEthernet0/0/0/1', 'ipv4 address 192.168.0.1 255.255.255.0']


Authors

  • Sumit Jaiswal (@justjais)
  • Rohit Thakur (@rohitthakur2590)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/cisco/iosxr/iosxr_l3_interfaces_module.html