W3cubDocs

/Ansible 2.11

cisco.nxos.nxos_l3_interfaces – L3 interfaces resource module

Note

This plugin is part of the cisco.nxos collection (version 1.4.0).

To install it use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_l3_interfaces.

New in version 1.0.0: of cisco.nxos

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis

This module manages Layer-3 interfaces attributes of NX-OS Interfaces.

Note

This module has a corresponding action plugin.

Parameters

Parameter			Choices/Defaults	Comments
config list / elements=dictionary				A dictionary of Layer-3 interface options
	dot1q integer			Configures IEEE 802.1Q VLAN encapsulation on a subinterface.
	evpn_multisite_tracking string added in 1.1.0 of cisco.nxos		Choices: fabric-tracking dci-tracking	VxLAN evpn multisite Interface tracking. Supported only on selected model.
	ipv4 list / elements=dictionary			IPv4 address and attributes of the L3 interface.
		address string		IPV4 address of the L3 interface.
		secondary boolean	Choices: no yes	A boolean attribute to manage addition of secondary IP address.
		tag integer		URIB route tag value for local/direct routes.
	ipv6 list / elements=dictionary			IPv6 address and attributes of the L3 interface.
		address string		IPV6 address of the L3 interface.
		tag integer		URIB route tag value for local/direct routes.
	name string / required			Full name of L3 interface, i.e. Ethernet1/1.
	redirects boolean		Choices: no yes	Enables/disables ip redirects
	unreachables boolean		Choices: no yes	Enables/disables ip redirects
running_config string				This option is used only with state parsed. The value of this option should be the output received from the NX-OS device by executing the command show running-config \| section '^interface'. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string			Choices: merged ← replaced overridden deleted gathered rendered parsed	The state of the configuration after module completion. The state overridden would override the IP address configuration of all interfaces on the device with the provided configuration in the task. Use caution with this state as you may loose access to the device.

Notes

Note

Tested against NXOS 7.3.(0)D1(1) on VIRL

Examples

# Using merged

# Before state:
# -------------
#
# interface Ethernet1/6

- name: Merge provided configuration with device configuration.
  cisco.nxos.nxos_l3_interfaces:
    config:
    - name: Ethernet1/6
      ipv4:
      - address: 192.168.1.1/24
        tag: 5
      - address: 10.1.1.1/24
        secondary: true
        tag: 10
      ipv6:
      - address: fd5d:12c9:2201:2::1/64
        tag: 6
    - name: Ethernet1/7.42
      dot1q: 42
      redirects: false
      unreachables: false
    state: merged

# After state:
# ------------
#
# interface Ethernet1/6
#   ip address 192.168.22.1/24 tag 5
#   ip address 10.1.1.1/24 secondary tag 10
# interface Ethernet1/6
#   ipv6 address fd5d:12c9:2201:2::1/64 tag 6
# interface Ethernet1/7.42
#   encapsulation dot1q 42
#   no ip redirects
#   no ip unreachables


# Using replaced

# Before state:
# -------------
#
# interface Ethernet1/6
#   ip address 192.168.22.1/24
#   ipv6 address "fd5d:12c9:2201:1::1/64"

- name: Replace device configuration of specified L3 interfaces with provided configuration.
  cisco.nxos.nxos_l3_interfaces:
    config:
    - name: Ethernet1/6
      ipv4:
        - address: 192.168.22.3/24
    state: replaced

# After state:
# ------------
#
# interface Ethernet1/6
#   ip address 192.168.22.3/24


# Using overridden

# Before state:
# -------------
#
# interface Ethernet1/2
#   ip address 192.168.22.1/24
# interface Ethernet1/6
#   ipv6 address "fd5d:12c9:2201:1::1/64"

- name: Override device configuration of all L3 interfaces on device with provided
    configuration.
  cisco.nxos.nxos_l3_interfaces:
    config:
    - name: Ethernet1/2
      ipv4: 192.168.22.3/4
    state: overridden

# After state:
# ------------
#
# interface Ethernet1/2
#   ipv4 address 192.168.22.3/24
# interface Ethernet1/6


# Using deleted

# Before state:
# -------------
#
# interface Ethernet1/6
#   ip address 192.168.22.1/24
# interface Ethernet1/2
#   ipv6 address "fd5d:12c9:2201:1::1/64"

- name: Delete L3 attributes of given interfaces (This won't delete the interface
    itself).
  cisco.nxos.nxos_l3_interfaces:
    config:
    - name: Ethernet1/6
    - name: Ethernet1/2
    state: deleted

# After state:
# ------------
#
# interface Ethernet1/6
# interface Ethernet1/2

# Using rendered

- name: Use rendered state to convert task input to device specific commands
  cisco.nxos.nxos_l3_interfaces:
    config:
    - name: Ethernet1/800
      ipv4:
      - address: 192.168.1.100/24
        tag: 5
      - address: 10.1.1.1/24
        secondary: true
        tag: 10
    - name: Ethernet1/800
      ipv6:
      - address: fd5d:12c9:2201:2::1/64
        tag: 6
    state: rendered

# Task Output (redacted)
# -----------------------

# rendered:
#   - "interface Ethernet1/800"
#   - "ip address 192.168.1.100/24 tag 5"
#   - "ip address 10.1.1.1/24 secondary tag 10"
#   - "interface Ethernet1/800"
#   - "ipv6 address fd5d:12c9:2201:2::1/64 tag 6"

# Using parsed

# parsed.cfg
# ------------
# interface Ethernet1/800
#   ip address 192.168.1.100/24 tag 5
#   ip address 10.1.1.1/24 secondary tag 10
#   no ip redirects
# interface Ethernet1/801
#   ipv6 address fd5d:12c9:2201:2::1/64 tag 6
#   ip unreachables
# interface mgmt0
#   ip address dhcp
#   vrf member management

- name: Use parsed state to convert externally supplied config to structured format
  cisco.nxos.nxos_l3_interfaces:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Task output (redacted)
# -----------------------

# parsed:
#   - name: Ethernet1/800
#     ipv4:
#       - address: 192.168.1.100/24
#         tag: 5
#       - address: 10.1.1.1/24
#         secondary: True
#         tag: 10
#     redirects: False
#   - name: Ethernet1/801
#     ipv6:
#      - address: fd5d:12c9:2201:2::1/64
#        tag: 6
#     unreachables: True

# Using gathered

# Existing device config state
# -------------------------------
# interface Ethernet1/1
#   ip address 192.0.2.100/24
# interface Ethernet1/2
#   no ip redirects
#   ip address 203.0.113.10/24
#   ip unreachables
#   ipv6 address 2001:db8::1/32

- name: Gather l3_interfaces facts from the device using nxos_l3_interfaces
  cisco.nxos.nxos_l3_interfaces:
    state: gathered

# Task output (redacted)
# -----------------------

# gathered:
#   - name: Ethernet1/1
#     ipv4:
#       - address: 192.0.2.100/24
#   - name: Ethernet1/2
#     ipv4:
#       - address: 203.0.113.10/24
#     ipv6:
#       - address: 2001:db8::1/32
#     redirects: False
#     unreachables: True

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after list / elements=string	when changed	The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above.
before list / elements=string	always	The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list / elements=string	always	The set of commands pushed to the remote device. Sample: ['interface Ethernet1/2', 'ip address 192.168.0.1/2']

Authors

Trishna Guha (@trishnaguha)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/cisco/nxos/nxos_l3_interfaces_module.html