W3cubDocs

/Ansible 2.11

community.aws.aws_batch_job_definition – Manage AWS Batch Job Definitions

Note

This plugin is part of the community.aws collection (version 1.3.0).

To install it use: ansible-galaxy collection install community.aws.

To use it in a playbook, specify: community.aws.aws_batch_job_definition.

New in version 1.0.0: of community.aws

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis

This module allows the management of AWS Batch Job Definitions.
It is idempotent and supports “Check” mode.
Use module community.aws.aws_batch_compute_environment to manage the compute environment, community.aws.aws_batch_job_queue to manage job queues, community.aws.aws_batch_job_definition to manage job definitions.

Requirements

The below requirements are needed on the host that executes this module.

boto
boto3
python >= 2.6

Parameters

Parameter		Choices/Defaults	Comments
attempts integer			Retry strategy - The number of times to move a job to the RUNNABLE status. You may specify between 1 and 10 attempts. If attempts is greater than one, the job is retried if it fails until it has moved to RUNNABLE that many times.
aws_access_key string			AWS access key. If not set then the value of the AWS_ACCESS_KEY_ID, AWS_ACCESS_KEY or EC2_ACCESS_KEY environment variable is used. If profile is set this parameter is ignored. Passing the aws_access_key and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. aliases: ec2_access_key, access_key
aws_ca_bundle path			The location of a CA Bundle to use when validating SSL certificates. Only used for boto3 based modules. Note: The CA Bundle is read 'module' side and may need to be explicitly copied from the controller if not run locally.
aws_config dictionary			A dictionary to modify the botocore configuration. Parameters can be found at https://botocore.amazonaws.com/v1/documentation/api/latest/reference/config.html#botocore.config.Config. Only the 'user_agent' key is used for boto modules. See http://boto.cloudhackers.com/en/latest/boto_config_tut.html#boto for more boto configuration.
aws_secret_key string			AWS secret key. If not set then the value of the AWS_SECRET_ACCESS_KEY, AWS_SECRET_KEY, or EC2_SECRET_KEY environment variable is used. If profile is set this parameter is ignored. Passing the aws_secret_key and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. aliases: ec2_secret_key, secret_key
command list / elements=string			The command that is passed to the container. This parameter maps to Cmd in the Create a container section of the Docker Remote API and the COMMAND parameter to docker run. For more information, see https://docs.docker.com/engine/reference/builder/#cmd.
debug_botocore_endpoint_logs boolean		Choices: no ← yes	Use a botocore.endpoint logger to parse the unique (rather than total) "resource:action" API calls made during a task, outputing the set to the resource_actions key in the task results. Use the aws_resource_action callback to output to total list made during a playbook. The ANSIBLE_DEBUG_BOTOCORE_LOGS environment variable may also be used.
ec2_url string			Url to use to connect to EC2 or your Eucalyptus cloud (by default the module will use EC2 endpoints). Ignored for modules where region is required. Must be specified for all other modules if region is not used. If not set then the value of the EC2_URL environment variable, if any, is used. aliases: aws_endpoint_url, endpoint_url
environment list / elements=dictionary			The environment variables to pass to a container. This parameter maps to Env in the Create a container section of the Docker Remote API and the --env option to docker run.
	name string		The name of the key value pair. For environment variables, this is the name of the environment variable.
	value string		The value of the key value pair. For environment variables, this is the value of the environment variable.
image string / required			The image used to start a container. This string is passed directly to the Docker daemon. Images in the Docker Hub registry are available by default. Other repositories are specified with `` repository-url /image <colon>tag ``. Up to 255 letters (uppercase and lowercase), numbers, hyphens, underscores, colons, periods, forward slashes, and number signs are allowed. This parameter maps to Image in the Create a container section of the Docker Remote API and the IMAGE parameter of docker run.
job_definition_arn string			The ARN for the job definition.
job_definition_name string / required			The name for the job definition.
job_role_arn string			The Amazon Resource Name (ARN) of the IAM role that the container can assume for AWS permissions.
memory integer / required			The hard limit (in MiB) of memory to present to the container. If your container attempts to exceed the memory specified here, the container is killed. This parameter maps to Memory in the Create a container section of the Docker Remote API and the --memory option to docker run.
mount_points list / elements=dictionary			The mount points for data volumes in your container. This parameter maps to Volumes in the Create a container section of the Docker Remote API and the --volume option to docker run.
	containerPath string		The path on the container at which to mount the host volume.
	readOnly string		If this value is true , the container has read-only access to the volume; otherwise, the container can write to the volume. The default value is `false`.
	sourceVolume string		The name of the volume to mount.
parameters dictionary			Default parameter substitution placeholders to set in the job definition. Parameters are specified as a key-value pair mapping. Parameters in a SubmitJob request override any corresponding parameter defaults from the job definition.
privileged string			When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user). This parameter maps to Privileged in the Create a container section of the Docker Remote API and the --privileged option to docker run.
profile string			Uses a boto profile. Only works with boto >= 2.24.0. Using profile will override aws_access_key, aws_secret_key and security_token and support for passing them at the same time as profile has been deprecated. aws_access_key, aws_secret_key and security_token will be made mutually exclusive with profile after 2022-06-01. aliases: aws_profile
readonly_root_filesystem string			When this parameter is true, the container is given read-only access to its root file system. This parameter maps to ReadonlyRootfs in the Create a container section of the Docker Remote API and the --read-only option to docker run.
region string			The AWS region to use. If not specified then the value of the AWS_REGION or EC2_REGION environment variable, if any, is used. See http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region aliases: aws_region, ec2_region
security_token string			AWS STS security token. If not set then the value of the AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN environment variable is used. If profile is set this parameter is ignored. Passing the security_token and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. aliases: aws_security_token, access_token
state string		Choices: present ← absent	Describes the desired state.
type string / required			The type of job definition.
ulimits list / elements=dictionary			A list of ulimits to set in the container. This parameter maps to Ulimits in the Create a container section of the Docker Remote API and the --ulimit option to docker run.
	hardLimit string		The hard limit for the ulimit type.
	name string		The type of the ulimit.
	softLimit string		The soft limit for the ulimit type.
user string			The user name to use inside the container. This parameter maps to User in the Create a container section of the Docker Remote API and the --user option to docker run.
validate_certs boolean		Choices: no yes ←	When set to "no", SSL certificates will not be validated for boto versions >= 2.6.0.
vcpus integer / required			The number of vCPUs reserved for the container. This parameter maps to CpuShares in the Create a container section of the Docker Remote API and the --cpu-shares option to docker run. Each vCPU is equivalent to 1,024 CPU shares.
volumes list / elements=dictionary			A list of data volumes used in a job.
	host string		The contents of the host parameter determine whether your data volume persists on the host container instance and where it is stored. If the host parameter is empty, then the Docker daemon assigns a host path for your data volume, but the data is not guaranteed to persist after the containers associated with it stop running. This is a dictionary with one property, sourcePath - The path on the host container instance that is presented to the container. If this parameter is empty,then the Docker daemon has assigned a host path for you. If the host parameter contains a sourcePath file location, then the data volume persists at the specified location on the host container instance until you delete it manually. If the sourcePath value does not exist on the host container instance, the Docker daemon creates it. If the location does exist, the contents of the source path folder are exported.
	name string		The name of the volume. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. This name is referenced in the sourceVolume parameter of container definition mountPoints.

Notes

Note

If parameters are not set within the module, the following environment variables can be used in decreasing order of precedence AWS_URL or EC2_URL, AWS_PROFILE or AWS_DEFAULT_PROFILE, AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY or EC2_ACCESS_KEY, AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY or EC2_SECRET_KEY, AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN, AWS_REGION or EC2_REGION, AWS_CA_BUNDLE
Ansible uses the boto configuration file (typically ~/.boto) if no credentials are provided. See https://boto.readthedocs.io/en/latest/boto_config_tut.html
AWS_REGION or EC2_REGION can be typically be used to specify the AWS region, when required, but this can also be configured in the boto config file

Examples

---
- hosts: localhost
  gather_facts: no
  vars:
    state: present
  tasks:
- name: My Batch Job Definition
  community.aws.aws_batch_job_definition:
    job_definition_name: My Batch Job Definition
    state: present
    type: container
    parameters:
      Param1: Val1
      Param2: Val2
    image: <Docker Image URL>
    vcpus: 1
    memory: 512
    command:
      - python
      - run_my_script.py
      - arg1
    job_role_arn: <Job Role ARN>
    attempts: 3
  register: job_definition_create_result

- name: show results
  ansible.builtin.debug: var=job_definition_create_result

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
output dictionary	always	returns what action was taken, whether something was changed, invocation and response Sample: {'aws_batch_job_definition_action': 'none', 'changed': False, 'response': {'job_definition_arn': 'arn:aws:batch:....', 'job_definition_name': '<name>', 'status': 'INACTIVE', 'type': 'container'}}

Authors

Jon Meran (@jonmer85)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/community/aws/aws_batch_job_definition_module.html