W3cubDocs

/Ansible 2.11

community.general.hwc_evs_disk – Creates a resource of Evs/Disk in Huawei Cloud

Note

This plugin is part of the community.general collection (version 2.0.1).

To install it use: ansible-galaxy collection install community.general.

To use it in a playbook, specify: community.general.hwc_evs_disk.

New in version 0.2.0: of community.general

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis

block storage management.

Requirements

The below requirements are needed on the host that executes this module.

keystoneauth1 >= 3.6.0

Parameters

Parameter		Choices/Defaults	Comments
availability_zone string / required			Specifies the AZ where you want to create the disk.
backup_id string			Specifies the ID of the backup that can be used to create a disk. This parameter is mandatory when you use a backup to create the disk.
description string			Specifies the disk description. The value can contain a maximum of 255 bytes.
domain string / required			The name of the Domain to scope to (Identity v3). (currently only domain names are supported, and not domain IDs).
enable_full_clone boolean		Choices: no yes	If the disk is created from a snapshot and linked cloning needs to be used, set this parameter to True.
enable_scsi boolean		Choices: no yes	If this parameter is set to True, the disk device type will be SCSI, which allows ECS OSs to directly access underlying storage media. SCSI reservation command is supported. If this parameter is set to False, the disk device type will be VBD, which supports only simple SCSI read/write commands. If parameter enable_share is set to True and this parameter is not specified, shared SCSI disks are created. SCSI EVS disks cannot be created from backups, which means that this parameter cannot be True if backup_id has been specified.
enable_share boolean		Choices: no yes	Specifies whether the disk is shareable. The default value is False.
encryption_id string			Specifies the encryption ID. The length of it fixes at 36 bytes.
enterprise_project_id string			Specifies the enterprise project ID. This ID is associated with the disk during the disk creation. If it is not specified, the disk is bound to the default enterprise project.
id string			The id of resource to be managed.
identity_endpoint string / required			The Identity authentication URL.
image_id string			Specifies the image ID. If this parameter is specified, the disk is created from an image. BMS system disks cannot be created from BMS images.
name string / required			Specifies the disk name. The value can contain a maximum of 255 bytes.
password string / required			The password to login with.
project string / required			The name of the Tenant (Identity v2) or Project (Identity v3). (currently only project names are supported, and not project IDs).
region string			The region to which the project belongs.
size integer			Specifies the disk size, in GB. Its values are as follows, System disk 1 GB to 1024 GB, Data disk 10 GB to 32768 GB. This parameter is mandatory when you create an empty disk or use an image or a snapshot to create a disk. If you use an image or a snapshot to create a disk, the disk size must be greater than or equal to the image or snapshot size. This parameter is optional when you use a backup to create a disk. If this parameter is not specified, the disk size is equal to the backup size.
snapshot_id string			Specifies the snapshot ID. If this parameter is specified, the disk is created from a snapshot.
state string		Choices: present ← absent	Whether the given object should exist in Huaweicloud Cloud.
timeouts dictionary			The timeouts for each operations.
	create string	Default: "30m"	The timeouts for create operation.
	delete string	Default: "30m"	The timeouts for delete operation.
	update string	Default: "30m"	The timeouts for update operation.
user string / required			The user name to login with (currently only user names are supported, and not user IDs).
volume_type string / required			Specifies the disk type. Currently, the value can be SSD, SAS, or SATA. SSD specifies the ultra-high I/O disk type. SAS specifies the high I/O disk type. SATA specifies the common I/O disk type. If the specified disk type is not available in the AZ, the disk will fail to create. If the EVS disk is created from a snapshot, the volume_type field must be the same as that of the snapshot's source disk.

Notes

Note

For authentication, you can set identity_endpoint using the ANSIBLE_HWC_IDENTITY_ENDPOINT env variable.
For authentication, you can set user using the ANSIBLE_HWC_USER env variable.
For authentication, you can set password using the ANSIBLE_HWC_PASSWORD env variable.
For authentication, you can set domain using the ANSIBLE_HWC_DOMAIN env variable.
For authentication, you can set project using the ANSIBLE_HWC_PROJECT env variable.
For authentication, you can set region using the ANSIBLE_HWC_REGION env variable.
Environment variables values will only be used if the playbook values are not set.

Examples

# test create disk
- name: Create a disk
  community.general.hwc_evs_disk:
    availability_zone: "cn-north-1a"
    name: "ansible_evs_disk_test"
    volume_type: "SATA"
    size: 10

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key		Returned	Description
attachments complex		success	Specifies the disk attachment information.
	attached_at string	success	Specifies the time when the disk was attached. Time format is 'UTC YYYY-MM-DDTHH:MM:SS'.
	attachment_id string	success	Specifies the ID of the attachment information.
	device string	success	Specifies the device name.
	server_id string	success	Specifies the ID of the server to which the disk is attached.
availability_zone string		success	Specifies the AZ where you want to create the disk.
backup_id string		success	Specifies the ID of the backup that can be used to create a disk. This parameter is mandatory when you use a backup to create the disk.
backup_policy_id string		success	Specifies the backup policy ID.
created_at string		success	Specifies the time when the disk was created. Time format is 'UTC YYYY-MM-DDTHH:MM:SS'.
description string		success	Specifies the disk description. The value can contain a maximum of 255 bytes.
enable_full_clone boolean		success	If the disk is created from a snapshot and linked cloning needs to be used, set this parameter to True.
enable_scsi boolean		success	If this parameter is set to True, the disk device type will be SCSI, which allows ECS OSs to directly access underlying storage media. SCSI reservation command is supported. If this parameter is set to False, the disk device type will be VBD, which supports only simple SCSI read/write commands. If parameter enable_share is set to True and this parameter is not specified, shared SCSI disks are created. SCSI EVS disks cannot be created from backups, which means that this parameter cannot be True if backup_id has been specified.
enable_share boolean		success	Specifies whether the disk is shareable. The default value is False.
encryption_id string		success	Specifies the encryption ID. The length of it fixes at 36 bytes.
enterprise_project_id string		success	Specifies the enterprise project ID. This ID is associated with the disk during the disk creation. If it is not specified, the disk is bound to the default enterprise project.
image_id string		success	Specifies the image ID. If this parameter is specified, the disk is created from an image. BMS system disks cannot be created from BMS images.
is_bootable boolean		success	Specifies whether the disk is bootable.
is_readonly boolean		success	Specifies whether the disk is read-only or read/write. True indicates that the disk is read-only. False indicates that the disk is read/write.
name string		success	Specifies the disk name. The value can contain a maximum of 255 bytes.
size integer		success	Specifies the disk size, in GB. Its values are as follows, System disk 1 GB to 1024 GB, Data disk 10 GB to 32768 GB. This parameter is mandatory when you create an empty disk or use an image or a snapshot to create a disk. If you use an image or a snapshot to create a disk, the disk size must be greater than or equal to the image or snapshot size. This parameter is optional when you use a backup to create a disk. If this parameter is not specified, the disk size is equal to the backup size.
snapshot_id string		success	Specifies the snapshot ID. If this parameter is specified, the disk is created from a snapshot.
source_volume_id string		success	Specifies the source disk ID. This parameter has a value if the disk is created from a source disk.
status string		success	Specifies the disk status.
tags dictionary		success	Specifies the disk tags.
volume_type string		success	Specifies the disk type. Currently, the value can be SSD, SAS, or SATA. SSD specifies the ultra-high I/O disk type. SAS specifies the high I/O disk type. SATA specifies the common I/O disk type. If the specified disk type is not available in the AZ, the disk will fail to create. If the EVS disk is created from a snapshot, the volume_type field must be the same as that of the snapshot's source disk.

Authors

Huawei Inc. (@huaweicloud)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/community/general/hwc_evs_disk_module.html