W3cubDocs

/Ansible 2.11

f5networks.f5_modules.bigip_monitor_snmp_dca – Manages BIG-IP SNMP data collecting agent (DCA) monitors

Note

This plugin is part of the f5networks.f5_modules collection (version 1.7.1).

To install it use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_monitor_snmp_dca.

New in version 1.0.0: of f5networks.f5_modules

Synopsis

  • The BIG-IP has an SNMP data collecting agent (DCA) that can query remote SNMP agents of various types, including the UC Davis agent (UCD) and the Windows 2000 Server agent (WIN2000).

Parameters

Parameter Choices/Defaults Comments
agent_type
string
    Choices:
  • UCD
  • WIN2000
  • GENERIC
Specifies the SNMP agent running on the monitored server. When creating a new monitor, the default is UCD (UC-Davis).
community
string
Specifies the community name the system must use to authenticate with the host server through SNMP. When creating a new monitor, the default value is public. This value is case sensitive.
cpu_coefficient
string
Specifies the coefficient the system uses to calculate the weight of the CPU threshold in the dynamic ratio load balancing algorithm. When creating a new monitor, the default is 1.5.
cpu_threshold
integer
Specifies the maximum acceptable CPU usage on the target server. When creating a new monitor, the default is 80 percent.
description
string
Specifies descriptive text that identifies the monitor.
disk_coefficient
string
Specifies the coefficient the system uses to calculate the weight of the disk threshold in the dynamic ratio load balancing algorithm. When creating a new monitor, the default is 2.0.
disk_threshold
integer
Specifies the maximum acceptable disk usage on the target server. When creating a new monitor, the default is 90 percent.
interval
integer
Specifies the frequency, in seconds, at which the system issues the monitor check when either the resource is down or the status of the resource is unknown. When creating a new monitor, the default is 10.
memory_coefficient
string
Specifies the coefficient the system uses to calculate the weight of the memory threshold in the dynamic ratio load balancing algorithm. When creating a new monitor, the default is 1.0.
memory_threshold
integer
Specifies the maximum acceptable memory usage on the target server. When creating a new monitor, the default is 70 percent.
name
string / required
Monitor name.
parent
string
Default:
"/Common/snmp_dca"
The parent template of this monitor template. Once this value has been set, it cannot be changed. By default, this value is the snmp_dca parent on the Common partition.
partition
string
Default:
"Common"
Device partition to manage resources on.
provider
dictionary
added in 1.0.0 of f5networks.f5_modules
A dict object containing connection details.
auth_provider
string
Configures the auth provider for to obtain authentication tokens from the remote device.
This option is really used when working with BIG-IQ devices.
no_f5_teem
boolean
    Choices:
  • no
  • yes
If yes, TEEM telemetry data is not sent to F5.
You may omit this option by setting the environment variable F5_TEEM.
password
string / required
The password for the user account used to connect to the BIG-IP.
You may omit this option by setting the environment variable F5_PASSWORD.

aliases: pass, pwd
server
string / required
The BIG-IP host.
You may omit this option by setting the environment variable F5_SERVER.
server_port
integer
Default:
443
The BIG-IP server port.
You may omit this option by setting the environment variable F5_SERVER_PORT.
timeout
integer
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport
string
    Choices:
  • rest ←
Configures the transport connection to use when connecting to the remote device.
user
string / required
The username to connect to the BIG-IP with. This user must have administrative privileges on the device.
You may omit this option by setting the environment variable F5_USER.
validate_certs
boolean
    Choices:
  • no
  • yes ←
If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.
You may omit this option by setting the environment variable F5_VALIDATE_CERTS.
state
string
    Choices:
  • present ←
  • absent
When present, ensures the monitor exists.
When absent, ensures the monitor is removed.
time_until_up
integer
Specifies the number of seconds to wait after a resource first responds correctly to the monitor before setting the resource to 'up'. During the interval, all responses from the resource must be correct. When the interval expires, the resource is marked 'up'. A value of 0, means that the resource is marked up immediately upon receipt of the first correct response. When creating a new monitor, the default is 0.
timeout
integer
Specifies the number of seconds the target has in which to respond to the monitor request. When creating a new monitor, the default is 30 seconds. If the target responds within the set time period, it is considered 'up'. If the target does not respond within the set time period, it is considered 'down'. When this value is set to 0 (zero), the system uses the interval from the parent monitor. Note that timeout and time_until_up combine to control when a resource is set to up.
version
string
    Choices:
  • v1
  • v2c
Specifies the version of SNMP the host server uses. When creating a new monitor, the default is v1. When v1, specifies the host server uses SNMP version 1. When v2c, specifies that the host server uses SNMP version 2c.

Notes

Note

  • Requires BIG-IP software version >= 12
  • This module does not support the variables option because it is broken in the REST API and does not function correctly in tmsh; for example you cannot remove user-defined params. Therefore, there is no way to automatically configure it.
  • For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
  • Requires BIG-IP software version >= 12.
  • The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Create SNMP DCS monitor
  bigip_monitor_snmp_dca:
    name: my_monitor
    state: present
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Remove TCP Echo Monitor
  bigip_monitor_snmp_dca:
    name: my_monitor
    state: absent
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
agent_type
string
changed
The new agent type to be used by the monitor.

Sample:
UCD
community
string
changed
The new community for the monitor.

Sample:
foobar
cpu_coefficient
float
changed
The new CPU coefficient.

Sample:
2.4
cpu_threshold
integer
changed
The new CPU threshold.

Sample:
85
description
string
changed
The description of the monitor.

Sample:
Important Monitor
disk_coefficient
float
changed
The new disk coefficient.

Sample:
10.2
disk_threshold
integer
changed
The new disk threshold.

Sample:
34
interval
integer
changed
The new interval at which to run the monitor check.

Sample:
2
memory_coefficient
float
changed
The new memory coefficient.

Sample:
6.4
memory_threshold
integer
changed
The new memory threshold.

Sample:
50
parent
string
changed
New parent template of the monitor.

Sample:
snmp_dca
time_until_up
integer
changed
The new time in which to mark a system as up after first successful response.

Sample:
2
timeout
integer
changed
The new timeout in which the remote system must respond to the monitor.

Sample:
10
version
string
changed
The new new SNMP version to be used by the monitor.

Sample:
v2c


Authors

  • Tim Rupp (@caphrim007)
  • Wojciech Wypior (@wojtek0806)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/f5networks/f5_modules/bigip_monitor_snmp_dca_module.html