Note
This plugin is part of the f5networks.f5_modules collection (version 1.7.1).
To install it use: ansible-galaxy collection install f5networks.f5_modules.
To use it in a playbook, specify: f5networks.f5_modules.bigip_node.
New in version 1.0.0: of f5networks.f5_modules
| Parameter | Choices/Defaults | Comments | |
|---|---|---|---|
| address string | IP address of the node. This can be either IPv4 or IPv6. When creating a new node, you must provide one of either address or fqdn. This parameter cannot be updated after it is set.aliases: ip, host | ||
| availability_requirements dictionary | If you activate more than one health monitor, specifies the number of health monitors that must receive successful responses in order for the link to be considered available. | ||
| at_least integer | Specifies the minimum number of active health monitors that must be successful before the link is considered up. This parameter is only relevant when a type of at_least is used.This parameter will be ignored if a type of all is used. | ||
| type string / required |
| Monitor rule type when monitors is specified.When creating a new pool, if this value is not specified, the default of 'all' will be used. | |
| connection_limit integer | Node connection limit. Setting this to 0 disables the limit. | ||
| description string | Specifies descriptive text that identifies the node. You can remove a description by either specifying an empty string, or by specifying the special value none. | ||
| dynamic_ratio integer | The dynamic ratio number for the node. Used for dynamic ratio load balancing. When creating a new node, if this parameter is not specified, the default of 1 will be used. | ||
| fqdn string | FQDN name of the node. This can be any name that is a valid RFC 1123 DNS name. Therefore, the only characters that can be used are "A" to "Z", "a" to "z", "0" to "9", the hyphen ("-") and the period ("."). FQDN names must include at least one period; delineating the host from the domain. For example, host.domain.FQDN names must end with a letter or a number. When creating a new node, you must provide one of either address or fqdn provided. This parameter cannot be updated after it is set.aliases: hostname | ||
| fqdn_address_type string |
| Specifies whether the FQDN of the node resolves to an IPv4 or IPv6 address. When creating a new node, if this parameter is not specified and fqdn is specified, this parameter will default to ipv4.This parameter cannot be changed after it has been set. | |
| fqdn_auto_populate boolean |
| Specifies whether the system automatically creates ephemeral nodes using the IP addresses returned by the resolution of a DNS query for a node defined by an FQDN. When yes, the system generates an ephemeral node for each IP address returned in response to a DNS query for the FQDN of the node. Additionally, when a DNS response indicates the IP address of an ephemeral node no longer exists, the system deletes the ephemeral node.When no, the system resolves a DNS query for the FQDN of the node with the single IP address associated with the FQDN.When creating a new node, if this parameter is not specified and fqdn is specified, this parameter will default to yes.This parameter cannot be changed after it has been set. | |
| fqdn_down_interval integer | Specifies the interval in which a query occurs, when the DNS server is down. The associated monitor continues polling as long as the DNS server is down. When creating a new node, if this parameter is not specified and fqdn is specified, this parameter will default to 5. | ||
| fqdn_up_interval string | Specifies the interval at which a query occurs, when the DNS server is up. The associated monitor attempts to probe three times, and marks the server down if it there is no response within the span of three times the interval value, in seconds. This parameter accepts a value of ttl to query, based off of the TTL of the FQDN. The default TTL interval is similar to specifying 3600.When creating a new node, if this parameter is not specified and fqdn is specified, this parameter will default to 3600. | ||
| monitor_type string |
| Monitor rule type when monitors is specified. When creating a new pool, if this value is not specified, the default of 'and_list' will be used.Both single and and_list are functionally identical since BIG-IP considers all monitors as "a list". BIG-IP either has a list of many, or it has a list of one. Where they differ is in the extra guards that single provides; namely that it only allows a single monitor. | |
| monitors list / elements=string | Specifies the health monitors the system currently uses to monitor this node. | ||
| name string / required | Specifies the name of the node. | ||
| partition string | Default: "Common" | Device partition to manage resources on. | |
| provider dictionary added in 1.0.0 of f5networks.f5_modules | A dict object containing connection details. | ||
| auth_provider string | Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices. | ||
| no_f5_teem boolean |
| If yes, TEEM telemetry data is not sent to F5.You may omit this option by setting the environment variable F5_TEEM. | |
| password string / required | The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable F5_PASSWORD.aliases: pass, pwd | ||
| server string / required | The BIG-IP host. You may omit this option by setting the environment variable F5_SERVER. | ||
| server_port integer | Default: 443 | The BIG-IP server port. You may omit this option by setting the environment variable F5_SERVER_PORT. | |
| timeout integer | Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. | ||
| transport string |
| Configures the transport connection to use when connecting to the remote device. | |
| user string / required | The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable F5_USER. | ||
| validate_certs boolean |
| If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.You may omit this option by setting the environment variable F5_VALIDATE_CERTS. | |
| quorum integer | Monitor quorum value when monitor_type is m_of_n. | ||
| rate_limit integer | Node rate limit (connections-per-second). Setting this to 0 disables the limit. | ||
| ratio integer | Node ratio weight. Valid values range from 1 through 100. When creating a new node, if this parameter is not specified, the default of 1 will be used. | ||
| state string |
| Specifies the current state of the node. enabled (All traffic allowed), specifies the system sends traffic to this node regardless of the node's state. disabled (Only persistent or active connections allowed), specifies the node can handle only persistent or active connections. offline (Only active connections allowed), specifies the node can handle only active connections. In all cases except absent, the node will be created if it does not yet exist.Be particularly careful about changing the status of a node whose FQDN cannot be resolved. These situations disable your ability to change their state to disabled or offline. They will remain in an *Unavailable - Enabled* state. | |
Note
- name: Add node
bigip_node:
host: 10.20.30.40
name: 10.20.30.40
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
- name: Add node with a single 'ping' monitor
bigip_node:
host: 10.20.30.40
name: mytestserver
monitors:
- /Common/icmp
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
- name: Modify node description
bigip_node:
name: 10.20.30.40
description: Our best server yet
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
- name: Delete node
bigip_node:
state: absent
name: 10.20.30.40
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
- name: Force node offline
bigip_node:
state: disabled
name: 10.20.30.40
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
- name: Add node by their FQDN
bigip_node:
fqdn: foo.bar.com
name: foobar.net
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| description string | changed and success | Changed value for the description of the node. Sample: E-Commerce webserver in ORD |
| monitor_type string | changed and success | Changed value for the monitor_type of the node. Sample: m_of_n |
| monitors list / elements=string | changed and success | Changed list of monitors for the node. Sample: ['icmp', 'tcp_echo'] |
| quorum integer | changed and success | Changed value for the quorum of the node. Sample: 1 |
| session string | changed and success | Changed value for the internal session of the node. Sample: user-disabled |
| state string | changed and success | Changed value for the internal state of the node. Sample: m_of_n |
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/f5networks/f5_modules/bigip_node_module.html