W3cubDocs

/Ansible 2.11

junipernetworks.junos.junos_facts – Collect facts from remote devices running Juniper Junos

Note

This plugin is part of the junipernetworks.junos collection (version 1.3.0).

To install it use: ansible-galaxy collection install junipernetworks.junos.

To use it in a playbook, specify: junipernetworks.junos.junos_facts.

New in version 1.0.0: of junipernetworks.junos

Synopsis
Requirements
Parameters
Notes
Examples

Synopsis

Collects fact information from a remote device running the Junos operating system. By default, the module will collect basic fact information from the device to be included with the hostvars. Additional fact information can be collected based on the configured set of arguments.

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

ncclient (>=v0.5.2)

Parameters

Parameter		Choices/Defaults	Comments
config_format string		Choices: xml text ← set json	The config_format argument specifies the format of the configuration when serializing output from the device. This argument is applicable only when `config` value is present in gather_subset. The config_format should be supported by the junos version running on device. This value is not applicable while fetching old style facts that is when `ofacts` value is present in value if gather_subset value. This option is valid only for `gather_subset` values.
gather_network_resources list / elements=string			When supplied, this argument will restrict the facts collected to a given subset. Possible values for this argument include all and the resources like interfaces, vlans etc. Can specify a list of values to include a larger subset. Values can also be used with an initial `!` to specify that a specific subset should not be collected. Valid subsets are 'all', 'interfaces', 'lacp', 'lacp_interfaces', 'lag_interfaces', 'l2_interfaces', 'l3_interfaces', 'lldp_global', 'lldp_interfaces', 'vlans'.
gather_subset list / elements=string		Default: ["!config"]	When supplied, this argument will restrict the facts collected to a given subset. Possible values for this argument include all, hardware, config, and interfaces. Can specify a list of values to include a larger subset. Values can also be used with an initial `!` to specify that a specific subset should not be collected. To maintain backward compatibility old style facts can be retrieved by explicitly adding `ofacts` to value, this requires junos-eznc to be installed as a prerequisite. Valid value of gather_subset are default, hardware, config, interfaces, ofacts. If `ofacts` is present in the list it fetches the old style facts (fact keys without 'ansible_' prefix) and it requires junos-eznc library to be installed on control node and the device login credentials must be given in `provider` option.
provider dictionary			Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli` or `connection: netconf`. For more information please see the Junos OS Platform Options guide. A dict object containing connection details.
	host string		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
	password string		Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
	port integer		Specifies the port to use when building the connection to the remote device. The port value will default to the well known SSH port of 22 (for `transport=cli`) or port 830 (for `transport=netconf`) device.
	ssh_keyfile path		Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE` will be used instead.
	timeout integer		Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport string	Choices: cli netconf ←	Configures the transport connection to use when connecting to the remote device.
	username string		Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.

Notes

Note

Ensure config_format used to retrieve configuration from device is supported by junos version running on device.
With config_format = json, configuration in the results will be a dictionary(and not a JSON string)
This module requires the netconf system service be enabled on the remote device being managed.
Tested against vSRX JUNOS version 15.1X49-D15.4, vqfx-10000 JUNOS Version 15.1X53-D60.4.
Recommended connection is netconf. See the Junos OS Platform Options.
This module also works with local connections for legacy playbooks.
Fetching old style facts requires junos-eznc library to be installed on control node and the device login credentials must be given in provider option.
For information on using CLI and netconf see the Junos OS Platform Options guide
For more information on using Ansible to manage network devices see the Ansible Network Guide
For more information on using Ansible to manage Juniper network devices see https://www.ansible.com/ansible-juniper.

Examples

- name: collect default set of facts
  junipernetworks.junos.junos_facts:

- name: collect default set of facts and configuration
  junipernetworks.junos.junos_facts:
    gather_subset: config

- name: Gather legacy and resource facts
  junipernetworks.junos.junos_facts:
    gather_subset: all
    gather_network_resources: all

Authors

Nathaniel Case (@Qalthos)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/junipernetworks/junos/junos_facts_module.html