Note
This plugin is part of the junipernetworks.junos collection (version 1.3.0).
To install it use: ansible-galaxy collection install junipernetworks.junos.
To use it in a playbook, specify: junipernetworks.junos.junos_l3_interface.
New in version 1.0.0: of junipernetworks.junos
major release after 2022-06-01
Updated modules released with more functionality
Use junipernetworks.junos.junos_l3_interfaces instead.
Note
This module has a corresponding action plugin.
The below requirements are needed on the host that executes this module.
| Parameter | Choices/Defaults | Comments | |
|---|---|---|---|
| active boolean |
| Specifies whether or not the configuration is active or deactivated | |
| aggregate list / elements=dictionary | List of L3 interfaces definitions | ||
| active boolean |
| Specifies whether or not the configuration is active or deactivated | |
| filter6_input string | The name of input filter for ipv6. | ||
| filter6_output string | The name of output filter for ipv6. | ||
| filter_input string | The name of input filter. | ||
| filter_output string | The name of output filter. | ||
| ipv4 string | IPv4 of the L3 interface. | ||
| ipv6 string | IPv6 of the L3 interface. | ||
| name string / required | Name of the L3 interface. | ||
| state string |
| State of the L3 interface configuration. | |
| unit integer | Default: 0 | Logical interface number. | |
| filter6_input string | The name of input filter for ipv6. | ||
| filter6_output string | The name of output filter for ipv6. | ||
| filter_input string | The name of input filter. | ||
| filter_output string | The name of output filter. | ||
| ipv4 string | IPv4 of the L3 interface. | ||
| ipv6 string | IPv6 of the L3 interface. | ||
| name string | Name of the L3 interface. | ||
| provider dictionary | Deprecated Starting with Ansible 2.5 we recommend using connection: network_cli or connection: netconf.For more information please see the Junos OS Platform Options guide. A dict object containing connection details. | ||
| host string | Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. | ||
| password string | Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead. | ||
| port integer | Specifies the port to use when building the connection to the remote device. The port value will default to the well known SSH port of 22 (for transport=cli) or port 830 (for transport=netconf) device. | ||
| ssh_keyfile path | Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead. | ||
| timeout integer | Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. | ||
| transport string |
| Configures the transport connection to use when connecting to the remote device. | |
| username string | Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead. | ||
| state string |
| State of the L3 interface configuration. | |
| unit integer | Default: 0 | Logical interface number. | |
Note
netconf. See the Junos OS Platform Options.local connections for legacy playbooks.- name: Set ge-0/0/1 IPv4 address
junipernetworks.junos.junos_l3_interface:
name: ge-0/0/1
ipv4: 192.168.0.1
- name: Remove ge-0/0/1 IPv4 address
junipernetworks.junos.junos_l3_interface:
name: ge-0/0/1
state: absent
- name: Set ipv4 address using aggregate
junipernetworks.junos.junos_l3_interface:
aggregate:
- name: ge-0/0/1
ipv4: 192.0.2.1
- name: ge-0/0/2
ipv4: 192.0.2.2
ipv6: fd5d:12c9:2201:2::2
- name: Delete ipv4 address using aggregate
junipernetworks.junos.junos_l3_interface:
aggregate:
- name: ge-0/0/1
ipv4: 192.0.2.1
- name: ge-0/0/2
ipv4: 192.0.2.2
state: absent
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| diff string | when configuration is changed and diff option is enabled. | Configuration difference before and after applying change. Sample: [edit interfaces ge-0/0/1 unit 0 family inet] + address 192.0.2.1/32; [edit interfaces ge-0/0/1 unit 0 family inet6] + address fd5d:12c9:2201:1::1/128; |
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/junipernetworks/junos/junos_l3_interface_module.html