W3cubDocs

/Ansible 2.11

junipernetworks.junos.junos_lacp – Global Link Aggregation Control Protocol (LACP) Junos resource module

Note

This plugin is part of the junipernetworks.junos collection (version 1.3.0).

To install it use: ansible-galaxy collection install junipernetworks.junos.

To use it in a playbook, specify: junipernetworks.junos.junos_lacp.

New in version 1.0.0: of junipernetworks.junos

Synopsis

  • This module provides declarative management of global LACP on Juniper Junos network devices.

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

  • ncclient (>=v0.6.4)

Parameters

Parameter Choices/Defaults Comments
config
dictionary
A dictionary of LACP global options
link_protection
string
    Choices:
  • revertive
  • non-revertive
Enable LACP link-protection for the system. If the value is set to non-revertive it will not revert links when a better priority link comes up. By default the link will be reverted.
system_priority
integer
LACP priority for the system.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the Junos device by executing the command show chassis aggregated-devices ethernet lacp.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result
state
string
    Choices:
  • merged
  • replaced
  • deleted
  • gathered
  • rendered
  • parsed
The state of the configuration after module completion

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.
  • Tested against vSRX JUNOS version 18.1R1.
  • This module works with connection netconf. See the Junos OS Platform Options.

Examples

# Using deleted

# Before state:
# -------------
# user@junos01# show chassis aggregated-devices ethernet lacp
# system-priority 63;
# link-protection {
#    non-revertive;
# }

- name: Delete global LACP attributes
  junipernetworks.junos.junos_lacp:
    state: deleted

# After state:
# ------------
# user@junos01# show chassis aggregated-devices ethernet lacp
#


# Using merged

# Before state:
# -------------
# user@junos01# show chassis aggregated-devices ethernet lacp
#

- name: Merge global LACP attributes
  junipernetworks.junos.junos_lacp:
    config:
      system_priority: 63
      link_protection: revertive
    state: merged

# After state:
# ------------
# user@junos01# show chassis aggregated-devices ethernet lacp
# system-priority 63;
# link-protection {
#    non-revertive;
# }


# Using replaced

# Before state:
# -------------
# user@junos01# show chassis aggregated-devices ethernet lacp
# system-priority 63;
# link-protection {
#    non-revertive;
# }

- name: Replace global LACP attributes
  junipernetworks.junos.junos_lacp:
    config:
      system_priority: 30
      link_protection: non-revertive
    state: replaced

# After state:
# ------------
# user@junos01# show chassis aggregated-devices ethernet lacp
# system-priority 30;
# link-protection;
#
# Using gathered
# Before state:
# ------------
#
# ansible@cm123456tr21# show chassis aggregated-devices ethernet lacp
# system-priority 63;
# link-protection;

- name: Gather junos lacp as in given arguments
  junipernetworks.junos.junos_lacp:
    state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": {
#         "link_protection": "revertive",
#         "system_priority": 63
#     }
# After state:
# ------------
#
# ansible@cm123456tr21# show chassis aggregated-devices ethernet lacp
# system-priority 63;
# link-protection;
# Using rendered
- name: Render platform specific xml from task input using rendered state
  junipernetworks.junos.junos_lacp:
    config:
      system_priority: 63
      link_protection: revertive
    state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": "<nc:chassis
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#     <nc:aggregated-devices>
#         <nc:ethernet>
#             <nc:lacp>
#                 <nc:system-priority>63</nc:system-priority>
#                 <nc:link-protection>
#                     <nc:non-revertive delete="delete"/>
#                 </nc:link-protection>
#             </nc:lacp>
#         </nc:ethernet>
#     </nc:aggregated-devices>
# </nc:chassis>
#
# Using parsed
# parsed.cfg
# ------------
#
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#     <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
#     <chassis>
#         <aggregated-devices>
#             <ethernet>
#                 <lacp>
#                     <system-priority>63</system-priority>
#                     <link-protection>
#                     </link-protection>
#                 </lacp>
#             </ethernet>
#         </aggregated-devices>
#     </chassis>
#     </configuration>
# </rpc-reply>
# - name: Convert lacp config to argspec without connecting to the appliance
#   junipernetworks.junos.junos_lacp:
#     running_config: "{{ lookup('file', './parsed.cfg') }}"
#     state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": {
#         "link_protection": "revertive",
#         "system_priority": 63
#     }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
dictionary
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
dictionary
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
xml
list / elements=string
always
The set of xml rpc payload pushed to the remote device.

Sample:
['<nc:chassis xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"> <nc:aggregated-devices> <nc:ethernet> <nc:lacp> <nc:system-priority>63</nc:system-priority> <nc:link-protection> <nc:non-revertive delete="delete"/> </nc:link-protection> </nc:lacp> </nc:ethernet> </nc:aggregated-devices> </nc:chassis>', 'xml 2', 'xml 3']


Authors

  • Ganesh Nalawade (@ganeshrn)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/junipernetworks/junos/junos_lacp_module.html