Note
This plugin is part of the junipernetworks.junos collection (version 1.3.0).
To install it use: ansible-galaxy collection install junipernetworks.junos.
To use it in a playbook, specify: junipernetworks.junos.junos_lacp.
New in version 1.0.0: of junipernetworks.junos
Note
This module has a corresponding action plugin.
The below requirements are needed on the host that executes this module.
| Parameter | Choices/Defaults | Comments | |
|---|---|---|---|
| config dictionary | A dictionary of LACP global options | ||
| link_protection string |
| Enable LACP link-protection for the system. If the value is set to non-revertive it will not revert links when a better priority link comes up. By default the link will be reverted. | |
| system_priority integer | LACP priority for the system. | ||
| running_config string | This option is used only with state parsed. The value of this option should be the output received from the Junos device by executing the command show chassis aggregated-devices ethernet lacp. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result | ||
| state string |
| The state of the configuration after module completion | |
Note
netconf. See the Junos OS Platform Options.# Using deleted
# Before state:
# -------------
# user@junos01# show chassis aggregated-devices ethernet lacp
# system-priority 63;
# link-protection {
# non-revertive;
# }
- name: Delete global LACP attributes
junipernetworks.junos.junos_lacp:
state: deleted
# After state:
# ------------
# user@junos01# show chassis aggregated-devices ethernet lacp
#
# Using merged
# Before state:
# -------------
# user@junos01# show chassis aggregated-devices ethernet lacp
#
- name: Merge global LACP attributes
junipernetworks.junos.junos_lacp:
config:
system_priority: 63
link_protection: revertive
state: merged
# After state:
# ------------
# user@junos01# show chassis aggregated-devices ethernet lacp
# system-priority 63;
# link-protection {
# non-revertive;
# }
# Using replaced
# Before state:
# -------------
# user@junos01# show chassis aggregated-devices ethernet lacp
# system-priority 63;
# link-protection {
# non-revertive;
# }
- name: Replace global LACP attributes
junipernetworks.junos.junos_lacp:
config:
system_priority: 30
link_protection: non-revertive
state: replaced
# After state:
# ------------
# user@junos01# show chassis aggregated-devices ethernet lacp
# system-priority 30;
# link-protection;
#
# Using gathered
# Before state:
# ------------
#
# ansible@cm123456tr21# show chassis aggregated-devices ethernet lacp
# system-priority 63;
# link-protection;
- name: Gather junos lacp as in given arguments
junipernetworks.junos.junos_lacp:
state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": {
# "link_protection": "revertive",
# "system_priority": 63
# }
# After state:
# ------------
#
# ansible@cm123456tr21# show chassis aggregated-devices ethernet lacp
# system-priority 63;
# link-protection;
# Using rendered
- name: Render platform specific xml from task input using rendered state
junipernetworks.junos.junos_lacp:
config:
system_priority: 63
link_protection: revertive
state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": "<nc:chassis
# xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
# <nc:aggregated-devices>
# <nc:ethernet>
# <nc:lacp>
# <nc:system-priority>63</nc:system-priority>
# <nc:link-protection>
# <nc:non-revertive delete="delete"/>
# </nc:link-protection>
# </nc:lacp>
# </nc:ethernet>
# </nc:aggregated-devices>
# </nc:chassis>
#
# Using parsed
# parsed.cfg
# ------------
#
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
# <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
# <chassis>
# <aggregated-devices>
# <ethernet>
# <lacp>
# <system-priority>63</system-priority>
# <link-protection>
# </link-protection>
# </lacp>
# </ethernet>
# </aggregated-devices>
# </chassis>
# </configuration>
# </rpc-reply>
# - name: Convert lacp config to argspec without connecting to the appliance
# junipernetworks.junos.junos_lacp:
# running_config: "{{ lookup('file', './parsed.cfg') }}"
# state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": {
# "link_protection": "revertive",
# "system_priority": 63
# }
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| after dictionary | when changed | The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above. |
| before dictionary | always | The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above. |
| xml list / elements=string | always | The set of xml rpc payload pushed to the remote device. Sample: ['<nc:chassis xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"> <nc:aggregated-devices> <nc:ethernet> <nc:lacp> <nc:system-priority>63</nc:system-priority> <nc:link-protection> <nc:non-revertive delete="delete"/> </nc:link-protection> </nc:lacp> </nc:ethernet> </nc:aggregated-devices> </nc:chassis>', 'xml 2', 'xml 3'] |
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/junipernetworks/junos/junos_lacp_module.html