W3cubDocs

/Ansible 2.11

netapp.ontap.na_ontap_interface – NetApp ONTAP LIF configuration

Note

This plugin is part of the netapp.ontap collection (version 21.1.1).

To install it use: ansible-galaxy collection install netapp.ontap.

To use it in a playbook, specify: netapp.ontap.na_ontap_interface.

New in version 2.6.0: of netapp.ontap

Synopsis

  • Creating / deleting and modifying the LIF.

Requirements

The below requirements are needed on the host that executes this module.

  • Ansible 2.9
  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’
  • netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues.
  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward.
  • REST support requires ONTAP 9.6 or later.
  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
address
string
Specifies the LIF's IP address.
Required when state=present and is_ipv4_link_local if false and subnet_name is not set.
admin_status
string
    Choices:
  • up
  • down
Specifies the administrative status of the LIF.
cert_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client cert file (.pem).
not supported with python 2.6.
current_node
string
Specifies the LIF's current node.
By default, this is home_node
current_port
string
Specifies the LIF's current port.
dns_domain_name
string
added in 2.9.0 of netapp.ontap
Specifies the unique, fully qualified domain name of the DNS zone of this LIF.
failover_group
string
added in 20.1.0 of netapp.ontap
Specifies the failover group for the LIF.
failover_policy
string
    Choices:
  • disabled
  • system-defined
  • local-only
  • sfo-partner-only
  • broadcast-domain-wide
Specifies the failover policy for the LIF.
feature_flags
dictionary
added in 20.5.0 of netapp.ontap
Enable or disable a new feature.
This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility.
Supported keys and values are subject to change without notice. Unknown keys are ignored.
firewall_policy
string
Specifies the firewall policy for the LIF.
force_subnet_association
boolean
added in 2.9.0 of netapp.ontap
    Choices:
  • no
  • yes
Set this to true to acquire the address from the named subnet and assign the subnet to the LIF.
home_node
string
Specifies the LIF's home node.
By default, the first node from the cluster is considered as home node
home_port
string
Specifies the LIF's home port.
Required when state=present
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no ←
  • yes
Enable and disable https.
Ignored when using REST as only https is supported.
Ignored when using SSL certificate authentication as it requires SSL.
interface_name
string / required
Specifies the logical interface (LIF) name.
is_auto_revert
boolean
    Choices:
  • no
  • yes
If true, data LIF will revert to its home node under certain circumstances such as startup,
and load balancing migration capability is disabled automatically
is_dns_update_enabled
boolean
added in 2.9.0 of netapp.ontap
    Choices:
  • no
  • yes
Specifies if DNS update is enabled for this LIF. Dynamic updates will be sent for this LIF if updates are enabled at Vserver level.
is_ipv4_link_local
boolean
added in 20.1.0 of netapp.ontap
    Choices:
  • no
  • yes
Specifies the LIF's are to acquire a ipv4 link local address.
Use case for this is when creating Cluster LIFs to allow for auto assignment of ipv4 link local address.
key_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client key file.
listen_for_dns_query
boolean
added in 2.9.0 of netapp.ontap
    Choices:
  • no
  • yes
If True, this IP address will listen for DNS queries for the dnszone specified.
netmask
string
Specifies the LIF's netmask.
Required when state=present and is_ipv4_link_local if false and subnet_name is not set.
ontapi
integer
The ontap api version to use
password
string
Password for the specified user.

aliases: pass
protocols
list / elements=string
Specifies the list of data protocols configured on the LIF. By default, the values in this element are nfs, cifs and fcache.
Other supported protocols are iscsi and fcp. A LIF can be configured to not support any data protocols by specifying 'none'.
Protocol values of none, iscsi, fc-nvme or fcp can't be combined with any other data protocol(s).
address, netmask and firewall_policy parameters are not supported for 'fc-nvme' option.
role
string
Specifies the role of the LIF.
When setting role as "intercluster" or "cluster", setting protocol is not supported.
When creating a "cluster" role, the node name will appear as the prefix in the name of LIF.
For example, if the specified name is clif and node name is node1, the LIF name appears in the ONTAP as node1_clif.
Possible values are 'undef', 'cluster', 'data', 'node-mgmt', 'intercluster', 'cluster-mgmt'.
Required when state=present unless service_policy is present and ONTAP version is 9.8 or better.
service_policy
string
added in 20.4.0 of netapp.ontap
Starting with ONTAP 9.5, you can configure LIF service policies to identify a single service or a list of services that will use a LIF.
In ONTAP 9.5, you can assign service policies only for LIFs in the admin SVM.
In ONTAP 9.6, you can additionally assign service policies for LIFs in the data SVMs.
When you specify a service policy for a LIF, you need not specify the data protocol and role for the LIF.
NOTE that role is still required because of a ZAPI issue. This limitation is removed in ONTAP 9.8.
Creating LIFs by specifying the role and data protocols is also supported.
state
string
    Choices:
  • present ←
  • absent
Whether the specified interface should exist or not.
subnet_name
string
added in 2.8.0 of netapp.ontap
Subnet where the interface address is allocated from.
If the option is not used, the IP address will need to be provided by the administrator during configuration.
use_rest
string
Default:
"auto"
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
always -- will always use the REST API
never -- will always use the ZAPI
auto -- will try to use the REST Api
username
string
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required.
For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.
Two authentication methods are supported
1. basic authentication, using username and password,
2. SSL certificate authentication, using a ssl client cert file, and optionally a private key file.
To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes ←
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.
vserver
string / required
The name of the vserver to use.

Notes

Note

  • The modules prefixed with na\_ontap are built to support the ONTAP storage platform.

Examples

- name: Create interface
  na_ontap_interface:
    state: present
    interface_name: data2
    home_port: e0d
    home_node: laurentn-vsim1
    role: data
    protocols:
      - nfs
      - cifs
    admin_status: up
    failover_policy: local-only
    firewall_policy: mgmt
    is_auto_revert: true
    address: 10.10.10.10
    netmask: 255.255.255.0
    force_subnet_association: false
    dns_domain_name: test.com
    listen_for_dns_query: true
    is_dns_update_enabled: true
    vserver: svm1
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"

- name: Create cluster interface
  na_ontap_interface:
    state: present
    interface_name: cluster_lif
    home_port: e0a
    home_node: cluster1-01
    role: cluster
    admin_status: up
    is_auto_revert: true
    is_ipv4_link_local: true
    vserver: Cluster
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"

- name: Migrate an interface
  na_ontap_interface:
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    vserver: ansible
    https: true
    validate_certs: false
    state: present
    interface_name: carchi_interface3
    home_port: e0d
    home_node: ansdev-stor-1
    current_node: ansdev-stor-2
    role: data
    failover_policy: local-only
    firewall_policy: mgmt
    is_auto_revert: true
    address: 10.10.10.12
    netmask: 255.255.255.0
    force_subnet_association: false
    admin_status: up

- name: Delete interface
  na_ontap_interface:
    state: absent
    interface_name: data2
    vserver: svm1
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"

Authors

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/netapp/ontap/na_ontap_interface_module.html