W3cubDocs

/Ansible 2.11

netapp.ontap.na_ontap_qos_policy_group – NetApp ONTAP manage policy group in Quality of Service.

Note

This plugin is part of the netapp.ontap collection (version 21.1.1).

To install it use: ansible-galaxy collection install netapp.ontap.

To use it in a playbook, specify: netapp.ontap.na_ontap_qos_policy_group.

New in version 2.8.0: of netapp.ontap

Synopsis

  • Create, destroy, modify, or rename QoS policy group on NetApp ONTAP.

Requirements

The below requirements are needed on the host that executes this module.

  • Ansible 2.9
  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’
  • netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues.
  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward.
  • REST support requires ONTAP 9.6 or later.
  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
cert_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client cert file (.pem).
not supported with python 2.6.
feature_flags
dictionary
added in 20.5.0 of netapp.ontap
Enable or disable a new feature.
This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility.
Supported keys and values are subject to change without notice. Unknown keys are ignored.
force
boolean
    Choices:
  • no ←
  • yes
Setting to 'true' forces the deletion of the workloads associated with the policy group along with the policy group.
from_name
string
Name of the existing policy group to be renamed to name.
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no ←
  • yes
Enable and disable https.
Ignored when using REST as only https is supported.
Ignored when using SSL certificate authentication as it requires SSL.
is_shared
boolean
added in 20.12.0 of netapp.ontap
    Choices:
  • no
  • yes
Whether the SLOs of the policy group are shared between the workloads or if the SLOs are applied separately to each workload.
key_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client key file.
max_throughput
string
Maximum throughput defined by this policy.
min_throughput
string
Minimum throughput defined by this policy.
name
string / required
The name of the policy group to manage.
ontapi
integer
The ontap api version to use
password
string
Password for the specified user.

aliases: pass
state
string
    Choices:
  • present ←
  • absent
Whether the specified policy group should exist or not.
use_rest
string
Default:
"auto"
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
always -- will always use the REST API
never -- will always use the ZAPI
auto -- will try to use the REST Api
username
string
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required.
For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.
Two authentication methods are supported
1. basic authentication, using username and password,
2. SSL certificate authentication, using a ssl client cert file, and optionally a private key file.
To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes ←
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.
vserver
string / required
Name of the vserver to use.

Notes

Note

  • The modules prefixed with na\_ontap are built to support the ONTAP storage platform.

Examples

- name: create qos policy group
  na_ontap_qos_policy_group:
    state: present
    name: policy_1
    vserver: policy_vserver
    max_throughput: 800KB/s,800iops
    min_throughput: 100iops
    hostname: 10.193.78.30
    username: admin
    password: netapp1!

- name: modify qos policy group max throughput
  na_ontap_qos_policy_group:
    state: present
    name: policy_1
    vserver: policy_vserver
    max_throughput: 900KB/s,800iops
    min_throughput: 100iops
    hostname: 10.193.78.30
    username: admin
    password: netapp1!

- name: delete qos policy group
  na_ontap_qos_policy_group:
    state: absent
    name: policy_1
    vserver: policy_vserver
    hostname: 10.193.78.30
    username: admin
    password: netapp1!

Authors

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/netapp/ontap/na_ontap_qos_policy_group_module.html