W3cubDocs

/Ansible 2.9

iosxr_interfaces – Manage interface attributes on Cisco IOS-XR network devices

New in version 2.9.

Synopsis

  • This module manages the interface attributes on Cisco IOS-XR network devices.

Parameters

Parameter Choices/Defaults Comments
config
list / elements=dictionary
A dictionary of interface options
description
string
Interface description.
duplex
string
    Choices:
  • full
  • half
Configures the interface duplex mode. Default is auto-negotiation when not configured.
enabled
boolean
    Choices:
  • no
  • yes
Administrative state of the interface.
Set the value to True to administratively enable the interface or False to disable it.
mtu
integer
Sets the MTU value for the interface. Applicable for Ethernet interfaces only.
Refer to vendor documentation for valid values.
name
string / required
Full name of the interface to configure in type + path format. e.g. GigabitEthernet0/0/0/0
speed
integer
Configure the speed for an interface. Default is auto-negotiation when not configured.
state
string
    Choices:
  • merged
  • replaced
  • overridden
  • deleted
The state of the configuration after module completion

Notes

Note

Examples

---
# Using merged

# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  description Replaced by Ansible Team
#  mtu 2000
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  dot1q native vlan 1021
# !

- name: Configure Ethernet interfaces
  iosxr_interfaces:
    config:
      - name: GigabitEthernet0/0/0/2
        description: 'Configured by Ansible'
        enabled: True
      - name: GigabitEthernet0/0/0/3
        description: 'Configured by Ansible Network'
        enabled: False
        duplex: full
    state: merged

# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  description Configured and Merged by Ansible Network
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  description Configured and Merged by Ansible Network
#  mtu 2600
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex full
#  shutdown
#  dot1q native vlan 1021
# !

# Using replaced

# Before state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  description Configured by Ansible
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  description Test
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  dot1q native vlan 1021
# !

- name: Configure following interfaces and replace their existing config
  iosxr_interfaces:
    config:
      - name: GigabitEthernet0/0/0/2
        description: Configured by Ansible
        enabled: True
        mtu: 2000
      - name: GigabitEthernet0/0/0/3
        description: 'Configured by Ansible Network'
        enabled: False
        duplex: auto
    state: replaced

# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  description Configured by Ansible
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  description Configured and Replaced by Ansible
#  mtu 2000
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  description Configured and Replaced by Ansible Network
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex half
#  shutdown
#  dot1q native vlan 1021
# !

# Using overridden

# Before state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  description Configured by Ansible
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  description Configured by Ansible
#  mtu 2600
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex full
#  shutdown
#  dot1q native vlan 1021
# !

- name: Override interfaces
  iosxr_interfaces:
    config:
      - name: GigabitEthernet0/0/0/2
        description: 'Configured by Ansible'
        enabled: True
        duplex: auto
      - name: GigabitEthernet0/0/0/3
        description: 'Configured by Ansible Network'
        enabled: False
        speed: 1000
    state: overridden

# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  description Configured and Overridden by Ansible Network
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  speed 1000
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  description Configured and Overridden by Ansible Network
#  mtu 2000
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex full
#  shutdown
#  dot1q native vlan 1021
# !

# Using deleted

# Before state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  description Configured and Overridden by Ansible Network
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  speed 1000
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  description Configured and Overridden by Ansible Network
#  mtu 2000
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex full
#  shutdown
#  dot1q native vlan 1021
# !

- name: Delete IOSXR interfaces as in given arguments
  iosxr_interfaces:
    config:
      - name: GigabitEthernet0/0/0/2
      - name: GigabitEthernet0/0/0/3
    state: deleted

# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  dot1q native vlan 1021
# !

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list
always
The set of commands pushed to the remote device

Sample:
['interface GigabitEthernet0/0/0/2', 'description: Configured by Ansible', 'shutdown']


Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Sumit Jaiswal (@justjais)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/iosxr_interfaces_module.html