W3cubDocs

/Ansible 2.9

junos_l2_interfaces – Manage Layer-2 interface on Juniper JUNOS devices

New in version 2.9.

Synopsis

  • This module provides declarative management of a Layer-2 interface on Juniper JUNOS devices.

Requirements

The below requirements are needed on the host that executes this module.

  • ncclient (>=v0.6.4)

Parameters

Parameter Choices/Defaults Comments
config
list / elements=dictionary
A dictionary of Layer-2 interface options
access
dictionary
Configure the interface as a Layer 2 access mode.
vlan
string
Configure the access VLAN ID.
enhanced_layer
boolean
    Choices:
  • no
  • yes
True if your device has Enhanced Layer 2 Software (ELS). If the l2 configuration is under interface-mode the value is True else if the l2 configuration is under port-mode value is False
name
string / required
Full name of interface, e.g. ge-0/0/1.
trunk
dictionary
Configure the interface as a Layer 2 trunk mode.
allowed_vlans
list
List of VLANs to be configured in trunk port. It's used as the VLAN range to ADD or REMOVE from the trunk.
native_vlan
string
Native VLAN to be configured in trunk port. It is used as the trunk native VLAN ID.
unit
integer
Logical interface number. Value of unit should be of type integer.
state
string
    Choices:
  • merged
  • replaced
  • overridden
  • deleted
The state of the configuration after module completion

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.
  • Tested against vSRX JUNOS version 18.4R1.
  • This module works with connection netconf. See the Junos OS Platform Options.

Examples

# Using deleted

# Before state:
# -------------
#
# ansible@junos01# show interfaces
# ge-0/0/1 {
#    description "L2 interface";
#    speed 1g;
#    unit 0 {
#        family ethernet-switching {
#            interface-mode access;
#            vlan {
#                members vlan30;
#            }
#        }
#    }
#}
#ge-0/0/2 {
#    description "non L2 interface";
#    unit 0 {
#        family inet {
#            address 192.168.56.14/24;
#        }
#    }

- name: "Delete L2 attributes of given interfaces (Note: This won't delete the interface itself)."
  junos_l2_interfaces:
    config:
      - name: ge-0/0/1
      - name: ge-0/0/2
    state: deleted

# After state:
# ------------
#
# ansible@junos01# show interfaces
# ge-0/0/1 {
#    description "L2 interface";
#    speed 1g;
# }
#ge-0/0/2 {
#    description "non L2 interface";
#    unit 0 {
#        family inet {
#            address 192.168.56.14/24;
#        }
#    }


# Using merged

# Before state:
# -------------
# ansible@junos01# show interfaces
# ge-0/0/3 {
#    description "test interface";
#    speed 1g;
#}
# ge-0/0/4 {
#    description interface-trunk;
#    native-vlan-id 100;
#    unit 0 {
#        family ethernet-switching {
#            interface-mode trunk;
#            vlan {
#                members [ vlan40 ];
#            }
#        }
#    }
# }

- name: "Merge provided configuration with device configuration (default operation is merge)"
  junos_l2_interfaces:
    config:
      - name: ge-0/0/3
        access:
          vlan: v101
      - name: ge-0/0/4
        trunk:
          allowed_vlans:
            - vlan30
          native_vlan: 50
    state: merged

# After state:
# ------------
# user@junos01# show interfaces
# ge-0/0/3 {
#    description "test interface";
#    speed 1g;
#    unit 0 {
#        family ethernet-switching {
#            interface-mode access;
#            vlan {
#                members v101;
#            }
#        }
#    }
# }
# ge-0/0/4 {
#    description interface-trunk;
#    native-vlan-id 50;
#    unit 0 {
#        family ethernet-switching {
#            interface-mode trunk;
#            vlan {
#                members [ vlan40 vlan30 ];
#            }
#        }
#    }
# }


# Using overridden

# Before state:
# -------------
# ansible@junos01# show interfaces
# ge-0/0/3 {
#    description "test interface";
#    speed 1g;
#}
# ge-0/0/4 {
#    description interface-trunk;
#    native-vlan-id 100;
#    unit 0 {
#        family ethernet-switching {
#            interface-mode trunk;
#            vlan {
#                members [ vlan40 ];
#            }
#        }
#    }
# }
# ge-0/0/5 {
#    description "Configured by Ansible-11";
#    unit 0 {
#        family ethernet-switching {
#            interface-mode access;
#            vlan {
#                members v101;
#            }
#        }
#    }
# }

- name: "Override provided configuration with device configuration"
  junos_l2_interfaces:
    config:
      - name: ge-0/0/3
        access:
          vlan: v101
      - name: ge-0/0/4
        trunk:
          allowed_vlans:
            - vlan30
          native_vlan: 50
    state: overridden

# After state:
# ------------
# user@junos01# show interfaces
# ge-0/0/3 {
#    unit 0 {
#        family ethernet-switching {
#            interface-mode access;
#            vlan {
#                members v101;
#            }
#        }
#    }
# }
# ge-0/0/4 {
#    description interface-trunk;
#    native-vlan-id 50;
#    unit 0 {
#        family ethernet-switching {
#            interface-mode trunk;
#            vlan {
#                members [ vlan30 ];
#            }
#        }
#    }
# }


# Using replaced

# Before state:
# -------------
# ansible@junos01# show interfaces
# ge-0/0/3 {
#    description "test interface";
#    speed 1g;
#}
# ge-0/0/4 {
#    description interface-trunk;
#    native-vlan-id 100;
#    unit 0 {
#        family ethernet-switching {
#            interface-mode trunk;
#            vlan {
#                members [ vlan40 ];
#            }
#        }
#    }
# }

- name: "Replace provided configuration with device configuration"
  junos_l2_interfaces:
    config:
      - name: ge-0/0/3
        access:
          vlan: v101
      - name: ge-0/0/4
        trunk:
          allowed_vlans:
            - vlan30
          native_vlan: 50
    state: replaced

# After state:
# ------------
# user@junos01# show interfaces
# ge-0/0/3 {
#    unit 0 {
#        family ethernet-switching {
#            interface-mode access;
#            vlan {
#                members v101;
#            }
#        }
#    }
# }
# ge-0/0/4 {
#    description interface-trunk;
#    native-vlan-id 50;
#    unit 0 {
#        family ethernet-switching {
#            interface-mode trunk;
#            vlan {
#                members [ vlan30 ];
#            }
#        }
#    }
# }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list
always
The set of commands pushed to the remote device.

Sample:
['command 1', 'command 2', 'command 3']


Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Ganesh Nalawade (@ganeshrn)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/junos_l2_interfaces_module.html