W3cubDocs

/Codeception

Unit & Integration Tests

Codeception uses PHPUnit as a backend for running its tests. Thus, any PHPUnit test can be added to a Codeception test suite and then executed. If you ever wrote a PHPUnit test then do it just as you did before. Codeception adds some nice helpers to simplify common tasks.

Creating a Test

Create a test using generate:test command with a suite and test names as parameters:

php vendor/bin/codecept generate:test unit Example

It creates a new ExampleTest file located in the tests/unit directory.

As always, you can run the newly created test with this command:

php vendor/bin/codecept run unit ExampleTest

Or simply run the whole set of unit tests with:

php vendor/bin/codecept run unit

A test created by the generate:test command will look like this:

<?php

class ExampleTest extends \Codeception\Test\Unit
{
    /**
     * @var \UnitTester
     */
    protected $tester;

    protected function _before()
    {
    }

    protected function _after()
    {
    }

    // tests
    public function testMe()
    {

    }
}

Inside a class:

  • all public methods with test prefix are tests
  • _before method is executed before each test (like setUp in PHPUnit)
  • _after method is executed after each test (like tearDown in PHPUnit)

Unit Testing

Unit tests are focused around a single component of an application. All external dependencies for components should be replaced with test doubles.

A typical unit test may look like this:

<?php
class UserTest extends \Codeception\Test\Unit
{
    public function testValidation()
    {
        $user = new User();

        $user->setName(null);
        $this->assertFalse($user->validate(['username']));

        $user->setName('toolooooongnaaaaaaameeee');
        $this->assertFalse($user->validate(['username']));

        $user->setName('davert');
        $this->assertTrue($user->validate(['username']));
    }
}

Assertions

There are pretty many assertions you can use inside tests. The most common are:

  • $this->assertEquals()
  • $this->assertContains()
  • $this->assertFalse()
  • $this->assertTrue()
  • $this->assertNull()
  • $this->assertEmpty()

Assertion methods come from PHPUnit. See the complete reference at phpunit.de.

Test Doubles

Codeception provides Codeception\Stub library for building mocks and stubs for tests. Under the hood it used PHPUnit’s mock builder but with much simplified API.

Alternatively, Mockery can be used inside Codeception.

Stubs

Stubs can be created with a static methods of Codeception\Stub.

<?php
$user = \Codeception\Stub::make('User', ['getName' => 'john']);
$name = $user->getName(); // 'john'

See complete reference

Inside unit tests (Codeception\Test\Unit) it is recommended to use alternative API:

<?php
// create a stub with find method replaced
$userRepository = $this->make(UserRepository::class, ['find' => new User]);
$userRepository->find(1); // => User

// create a dummy
$userRepository = $this->makeEmpty(UserRepository::class);

// create a stub with all methods replaced except one
$user = $this->makeEmptyExcept(User::class, 'validate');
$user->validate($data);

// create a stub by calling constructor and replacing a method
$user = $this->construct(User::class, ['name' => 'davert'], ['save' => false]);

// create a stub by calling constructor with empty methods
$user = $this->constructEmpty(User::class, ['name' => 'davert']);

// create a stub by calling constructor with empty methods
$user = $this->constructEmptyExcept(User::class, 'getName', ['name' => 'davert']);
$user->getName(); // => davert
$user->setName('jane'); // => this method is empty

See complete reference

Stubs can also be created using static methods from Codeception\Stub class. In this

<?php
\Codeception\Stub::make(UserRepository::class, ['find' => new User]);

See a reference for static Stub API

Mocks

To declare expectations for mocks use Codeception\Stub\Expected class:

<?php
// create a mock where $user->getName() should never be called
$user = $this->make('User', [
     'getName' => Expected::never(),
     'someMethod' => function() {}
]);
$user->someMethod();

// create a mock where $user->getName() should be called at least once
$user = $this->make('User', [
        'getName' => Expected::atLeastOnce('Davert')
    ]
);
$user->getName();
$userName = $user->getName();
$this->assertEquals('Davert', $userName);

See complete reference

Integration Tests

Unlike unit tests integration tests doesn’t require the code to be executed in isolation. That allows us to use database and other components inside a tests. To improve the testing experience modules can be used as in functional testing.

Using Modules

As in scenario-driven functional or acceptance tests you can access Actor class methods. If you write integration tests, it may be useful to include the Db module for database testing.

# Codeception Test Suite Configuration

# suite for unit (internal) tests.
actor: UnitTester
modules:
    enabled:
        - Asserts
        - Db
        - \Helper\Unit

To access UnitTester methods you can use the UnitTester property in a test.

Testing Database

Let’s see how you can do some database testing:

<?php
function testSavingUser()
{
    $user = new User();
    $user->setName('Miles');
    $user->setSurname('Davis');
    $user->save();
    $this->assertEquals('Miles Davis', $user->getFullName());
    $this->tester->seeInDatabase('users', ['name' => 'Miles', 'surname' => 'Davis']);
}

To enable the database functionality in unit tests, make sure the Db module is included in the unit.suite.yml configuration file. The database will be cleaned and populated after each test, the same way it happens for acceptance and functional tests. If that’s not your required behavior, change the settings of the Db module for the current suite. See Db Module

Interacting with the Framework

You should probably not access your database directly if your project already uses ORM for database interactions. Why not use ORM directly inside your tests? Let’s try to write a test using Laravel’s ORM Eloquent. For this we need to configure the Laravel5 module. We won’t need its web interaction methods like amOnPage or see, so let’s enable only the ORM part of it:

actor: UnitTester
modules:
    enabled:
        - Asserts
        - Laravel5:
            part: ORM
        - \Helper\Unit

We included the Laravel5 module the same way we did for functional testing. Let’s see how we can use it for integration tests:

<?php
function testUserNameCanBeChanged()
{
    // create a user from framework, user will be deleted after the test
    $id = $this->tester->haveRecord('users', ['name' => 'miles']);
    // access model
    $user = User::find($id);
    $user->setName('bill');
    $user->save();
    $this->assertEquals('bill', $user->getName());
    // verify data was saved using framework methods
    $this->tester->seeRecord('users', ['name' => 'bill']);
    $this->tester->dontSeeRecord('users', ['name' => 'miles']);
}

A very similar approach can be used for all frameworks that have an ORM implementing the ActiveRecord pattern. In Yii2 and Phalcon, the methods haveRecord, seeRecord, dontSeeRecord work in the same way. They also should be included by specifying part: ORM in order to not use the functional testing actions.

If you are using Symfony with Doctrine, you don’t need to enable Symfony itself but just Doctrine2:

actor: UnitTester
modules:
    enabled:
        - Asserts
        - Doctrine2:
            depends: Symfony
        - \Helper\Unit

In this case you can use the methods from the Doctrine2 module, while Doctrine itself uses the Symfony module to establish connections to the database. In this case a test might look like:

<?php
function testUserNameCanBeChanged()
{
    // create a user from framework, user will be deleted after the test
    $id = $this->tester->haveInRepository(User::class, ['name' => 'miles']);
    // get entity manager by accessing module
    $em = $this->getModule('Doctrine2')->em;
    // get real user
    $user = $em->find(User::class, $id);
    $user->setName('bill');
    $em->persist($user);
    $em->flush();
    $this->assertEquals('bill', $user->getName());
    // verify data was saved using framework methods
    $this->tester->seeInRepository(User::class, ['name' => 'bill']);
    $this->tester->dontSeeInRepository(User::class, ['name' => 'miles']);
}

In both examples you should not be worried about the data persistence between tests. The Doctrine2 and Laravel5 modules will clean up the created data at the end of a test. This is done by wrapping each test in a transaction and rolling it back afterwards.

Accessing Module

Codeception allows you to access the properties and methods of all modules defined for this suite. Unlike using the UnitTester class for this purpose, using a module directly grants you access to all public properties of that module.

We have already demonstrated this in a previous example where we accessed the Entity Manager from a Doctrine2 module:

<?php
/** @var Doctrine\ORM\EntityManager */
$em = $this->getModule('Doctrine2')->em;

If you use the Symfony module, here is how you can access the Symfony container:

<?php
/** @var Symfony\Component\DependencyInjection\Container */
$container = $this->getModule('Symfony')->container;

The same can be done for all public properties of an enabled module. Accessible properties are listed in the module reference.

Scenario Driven Testing

Cest format can also be used for integration testing. In some cases it makes tests cleaner as it simplifies module access by using common $I-> syntax:

<?php
public function buildShouldHaveSequence(\UnitTester $I)
{
    $build = $I->have(Build::class, ['project_id' => $this->project->id]);
    $I->assertEquals(1, $build->sequence);
    $build = $I->have(Build::class, ['project_id' => $this->project->id]);
    $I->assertEquals(2, $build->sequence);
    $this->project->refresh();
    $I->assertEquals(3, $this->project->build_sequence);
}

This format can be recommended for testing domain and database interactions.

In Cest format you don’t have native support for test doubles so it’s recommended to include a trait \Codeception\Test\Feature\Stub to enable mocks inside a test. Alternatively, install and enable Mockery module.

Advanced Tools

Specify

When writing tests you should prepare them for constant changes in your application. Tests should be easy to read and maintain. If a specification of your application is changed, your tests should be updated as well. If you don’t have a convention inside your team for documenting tests, you will have issues figuring out what tests will be affected by the introduction of a new feature.

That’s why it’s pretty important not just to cover your application with unit tests, but make unit tests self-explanatory. We do this for scenario-driven acceptance and functional tests, and we should do this for unit and integration tests as well.

For this case we have a stand-alone project Specify (which is included in the phar package) for writing specifications inside unit tests:

<?php
class UserTest extends \Codeception\Test\Unit
{
    use \Codeception\Specify;

    /** @specify */
    private $user;

    public function testValidation()
    {
        $this->user = User::create();

        $this->specify("username is required", function() {
            $this->user->username = null;
            $this->assertFalse($this->user->validate(['username']));
        });

        $this->specify("username is too long", function() {
            $this->user->username = 'toolooooongnaaaaaaameeee';
            $this->assertFalse($this->user->validate(['username']));
        });

        $this->specify("username is ok", function() {
            $this->user->username = 'davert';
            $this->assertTrue($this->user->validate(['username']));
        });
    }
}

By using specify codeblocks, you can describe any piece of a test. This makes tests much cleaner and comprehensible for everyone in your team.

Code inside specify blocks is isolated. In the example above, any changes to $this->user will not be reflected in other code blocks as it is marked with @specify annotation.

Also, you may add Codeception\Verify for BDD-style assertions. This tiny library adds more readable assertions, which is quite nice, if you are always confused about which argument in assert calls is expected and which one is actual:

<?php
verify($user->getName())->equals('john');

Domain Assertions

The more complicated your domain is the more explicit your tests should be. With DomainAssert library you can easily create custom assertion methods for unit and integration tests.

It allows to reuse business rules inside assertion methods:

<?php
$user = new User;

// simple custom assertions below:
$this->assertUserIsValid($user);
$this->assertUserIsAdmin($user);

// use combined explicit assertion
// to tell what you expect to check
$this->assertUserCanPostToBlog($user, $blog);
// instead of just calling a bunch of assertions
$this->assertNotNull($user);
$this->assertNotNull($blog);
$this->assertContain($user, $blog->getOwners());

With custom assertion methods you can improve readability of your tests and keep them focused around the specification.

AspectMock

AspectMock is an advanced mocking framework which allows you to replace any methods of any class in a test. Static methods, class methods, date and time functions can be easily replaced with AspectMock. For instance, you can test singletons!

<?php
public function testSingleton()
{
	$class = MySingleton::getInstance();
	$this->assertInstanceOf('MySingleton', $class);
	test::double('MySingleton', ['getInstance' => new DOMDocument]);
	$this->assertInstanceOf('DOMDocument', $class);
}

Conclusion

PHPUnit tests are first-class citizens in test suites. Whenever you need to write and execute unit tests, you don’t need to install PHPUnit separately, but use Codeception directly to execute them. Some nice features can be added to common unit tests by integrating Codeception modules. For most unit and integration testing, PHPUnit tests are enough. They run fast, and are easy to maintain.

© 2011 Michael Bodnarchuk and contributors
Licensed under the MIT License.
https://codeception.com/docs/05-UnitTests