W3cubDocs

/Elisp

Bitwise Operations on Integers

In a computer, an integer is represented as a binary number, a sequence of bits (digits which are either zero or one). Conceptually the bit sequence is infinite on the left, with the most-significant bits being all zeros or all ones. A bitwise operation acts on the individual bits of such a sequence. For example, shifting moves the whole sequence left or right one or more places, reproducing the same pattern moved over.

The bitwise operations in Emacs Lisp apply only to integers.

Function: ash integer1 count

ash (arithmetic shift) shifts the bits in integer1 to the left count places, or to the right if count is negative. Left shifts introduce zero bits on the right; right shifts discard the rightmost bits. Considered as an integer operation, ash multiplies integer1 by 2**count, and then converts the result to an integer by rounding downward, toward minus infinity.

Here are examples of ash, shifting a pattern of bits one place to the left and to the right. These examples show only the low-order bits of the binary pattern; leading bits all agree with the highest-order bit shown. As you can see, shifting left by one is equivalent to multiplying by two, whereas shifting right by one is equivalent to dividing by two and then rounding toward minus infinity.

(ash 7 1) ⇒ 14
;; Decimal 7 becomes decimal 14.
…000111
     ⇒
…001110
(ash 7 -1) ⇒ 3
…000111
     ⇒
…000011
(ash -7 1) ⇒ -14
…111001
     ⇒
…110010
(ash -7 -1) ⇒ -4
…111001
     ⇒
…111100

Here are examples of shifting left or right by two bits:

                  ;         binary values
(ash 5 2)         ;   5  =  …000101
     ⇒ 20         ;      =  …010100
(ash -5 2)        ;  -5  =  …111011
     ⇒ -20        ;      =  …101100
(ash 5 -2)
     ⇒ 1          ;      =  …000001
(ash -5 -2)
     ⇒ -2         ;      =  …111110
Function: lsh integer1 count

lsh, which is an abbreviation for logical shift, shifts the bits in integer1 to the left count places, or to the right if count is negative, bringing zeros into the vacated bits. If count is negative, then integer1 must be either a fixnum or a positive bignum, and lsh treats a negative fixnum as if it were unsigned by subtracting twice most-negative-fixnum before shifting, producing a nonnegative result. This quirky behavior dates back to when Emacs supported only fixnums; nowadays ash is a better choice.

As lsh behaves like ash except when integer1 and count1 are both negative, the following examples focus on these exceptional cases. These examples assume 30-bit fixnums.

                 ;      binary values
(ash -7 -1)      ; -7 = …111111111111111111111111111001
     ⇒ -4        ;    = …111111111111111111111111111100
(lsh -7 -1)
     ⇒ 536870908 ;    = …011111111111111111111111111100
(ash -5 -2)      ; -5 = …111111111111111111111111111011
     ⇒ -2        ;    = …111111111111111111111111111110
(lsh -5 -2)
     ⇒ 268435454 ;    = …001111111111111111111111111110
Function: logand &rest ints-or-markers

This function returns the bitwise AND of the arguments: the nth bit is 1 in the result if, and only if, the nth bit is 1 in all the arguments.

For example, using 4-bit binary numbers, the bitwise AND of 13 and 12 is 12: 1101 combined with 1100 produces 1100. In both the binary numbers, the leftmost two bits are both 1 so the leftmost two bits of the returned value are both 1. However, for the rightmost two bits, each is 0 in at least one of the arguments, so the rightmost two bits of the returned value are both 0.

Therefore,

(logand 13 12)
     ⇒ 12

If logand is not passed any argument, it returns a value of -1. This number is an identity element for logand because its binary representation consists entirely of ones. If logand is passed just one argument, it returns that argument.

                   ;        binary values

(logand 14 13)     ; 14  =  …001110
                   ; 13  =  …001101
     ⇒ 12         ; 12  =  …001100
(logand 14 13 4)   ; 14  =  …001110
                   ; 13  =  …001101
                   ;  4  =  …000100
     ⇒ 4          ;  4  =  …000100
(logand)
     ⇒ -1         ; -1  =  …111111
Function: logior &rest ints-or-markers

This function returns the bitwise inclusive OR of its arguments: the nth bit is 1 in the result if, and only if, the nth bit is 1 in at least one of the arguments. If there are no arguments, the result is 0, which is an identity element for this operation. If logior is passed just one argument, it returns that argument.

                   ;        binary values

(logior 12 5)      ; 12  =  …001100
                   ;  5  =  …000101
     ⇒ 13         ; 13  =  …001101
(logior 12 5 7)    ; 12  =  …001100
                   ;  5  =  …000101
                   ;  7  =  …000111
     ⇒ 15         ; 15  =  …001111
Function: logxor &rest ints-or-markers

This function returns the bitwise exclusive OR of its arguments: the nth bit is 1 in the result if, and only if, the nth bit is 1 in an odd number of the arguments. If there are no arguments, the result is 0, which is an identity element for this operation. If logxor is passed just one argument, it returns that argument.

                   ;        binary values

(logxor 12 5)      ; 12  =  …001100
                   ;  5  =  …000101
     ⇒ 9          ;  9  =  …001001
(logxor 12 5 7)    ; 12  =  …001100
                   ;  5  =  …000101
                   ;  7  =  …000111
     ⇒ 14         ; 14  =  …001110
Function: lognot integer

This function returns the bitwise complement of its argument: the nth bit is one in the result if, and only if, the nth bit is zero in integer, and vice-versa. The result equals -1 - integer.

(lognot 5)
     ⇒ -6
;;  5  =  …000101
;; becomes
;; -6  =  …111010
Function: logcount integer

This function returns the Hamming weight of integer: the number of ones in the binary representation of integer. If integer is negative, it returns the number of zero bits in its two’s complement binary representation. The result is always nonnegative.

(logcount 43)     ;  43 = …000101011
     ⇒ 4
(logcount -43)    ; -43 = …111010101
     ⇒ 3

Copyright © 1990-1996, 1998-2019 Free Software Foundation, Inc.
Licensed under the GNU GPL license.
https://www.gnu.org/software/emacs/manual/html_node/elisp/Bitwise-Operations.html