W3cubDocs

/GCC 11

6.60.22.1 Basic PowerPC Built-in Functions Available on all Configurations

Built-in Function: void __builtin_cpu_init (void)

This function is a nop on the PowerPC platform and is included solely to maintain API compatibility with the x86 builtins.

Built-in Function: int __builtin_cpu_is (const char *cpuname)

This function returns a value of 1 if the run-time CPU is of type cpuname and returns 0 otherwise

The __builtin_cpu_is function requires GLIBC 2.23 or newer which exports the hardware capability bits. GCC defines the macro __BUILTIN_CPU_SUPPORTS__ if the __builtin_cpu_supports built-in function is fully supported.

If GCC was configured to use a GLIBC before 2.23, the built-in function __builtin_cpu_is always returns a 0 and the compiler issues a warning.

The following CPU names can be detected:

power10

IBM POWER10 Server CPU.

power9

IBM POWER9 Server CPU.

power8

IBM POWER8 Server CPU.

power7

IBM POWER7 Server CPU.

power6x

IBM POWER6 Server CPU (RAW mode).

power6

IBM POWER6 Server CPU (Architected mode).

power5+

IBM POWER5+ Server CPU.

power5

IBM POWER5 Server CPU.

ppc970

IBM 970 Server CPU (ie, Apple G5).

power4

IBM POWER4 Server CPU.

ppca2

IBM A2 64-bit Embedded CPU

ppc476

IBM PowerPC 476FP 32-bit Embedded CPU.

ppc464

IBM PowerPC 464 32-bit Embedded CPU.

ppc440

PowerPC 440 32-bit Embedded CPU.

ppc405

PowerPC 405 32-bit Embedded CPU.

ppc-cell-be

IBM PowerPC Cell Broadband Engine Architecture CPU.

Here is an example:

#ifdef __BUILTIN_CPU_SUPPORTS__
  if (__builtin_cpu_is ("power8"))
    {
       do_power8 (); // POWER8 specific implementation.
    }
  else
#endif
    {
       do_generic (); // Generic implementation.
    }
Built-in Function: int __builtin_cpu_supports (const char *feature)

This function returns a value of 1 if the run-time CPU supports the HWCAP feature feature and returns 0 otherwise.

The __builtin_cpu_supports function requires GLIBC 2.23 or newer which exports the hardware capability bits. GCC defines the macro __BUILTIN_CPU_SUPPORTS__ if the __builtin_cpu_supports built-in function is fully supported.

If GCC was configured to use a GLIBC before 2.23, the built-in function __builtin_cpu_suports always returns a 0 and the compiler issues a warning.

The following features can be detected:

4xxmac

4xx CPU has a Multiply Accumulator.

altivec

CPU has a SIMD/Vector Unit.

arch_2_05

CPU supports ISA 2.05 (eg, POWER6)

arch_2_06

CPU supports ISA 2.06 (eg, POWER7)

arch_2_07

CPU supports ISA 2.07 (eg, POWER8)

arch_3_00

CPU supports ISA 3.0 (eg, POWER9)

arch_3_1

CPU supports ISA 3.1 (eg, POWER10)

archpmu

CPU supports the set of compatible performance monitoring events.

booke

CPU supports the Embedded ISA category.

cellbe

CPU has a CELL broadband engine.

darn

CPU supports the darn (deliver a random number) instruction.

dfp

CPU has a decimal floating point unit.

dscr

CPU supports the data stream control register.

ebb

CPU supports event base branching.

efpdouble

CPU has a SPE double precision floating point unit.

efpsingle

CPU has a SPE single precision floating point unit.

fpu

CPU has a floating point unit.

htm

CPU has hardware transaction memory instructions.

htm-nosc

Kernel aborts hardware transactions when a syscall is made.

htm-no-suspend

CPU supports hardware transaction memory but does not support the tsuspend. instruction.

ic_snoop

CPU supports icache snooping capabilities.

ieee128

CPU supports 128-bit IEEE binary floating point instructions.

isel

CPU supports the integer select instruction.

mma

CPU supports the matrix-multiply assist instructions.

mmu

CPU has a memory management unit.

notb

CPU does not have a timebase (eg, 601 and 403gx).

pa6t

CPU supports the PA Semi 6T CORE ISA.

power4

CPU supports ISA 2.00 (eg, POWER4)

power5

CPU supports ISA 2.02 (eg, POWER5)

power5+

CPU supports ISA 2.03 (eg, POWER5+)

power6x

CPU supports ISA 2.05 (eg, POWER6) extended opcodes mffgpr and mftgpr.

ppc32

CPU supports 32-bit mode execution.

ppc601

CPU supports the old POWER ISA (eg, 601)

ppc64

CPU supports 64-bit mode execution.

ppcle

CPU supports a little-endian mode that uses address swizzling.

scv

Kernel supports system call vectored.

smt

CPU support simultaneous multi-threading.

spe

CPU has a signal processing extension unit.

tar

CPU supports the target address register.

true_le

CPU supports true little-endian mode.

ucache

CPU has unified I/D cache.

vcrypto

CPU supports the vector cryptography instructions.

vsx

CPU supports the vector-scalar extension.

Here is an example:

#ifdef __BUILTIN_CPU_SUPPORTS__
  if (__builtin_cpu_supports ("fpu"))
    {
       asm("fadd %0,%1,%2" : "=d"(dst) : "d"(src1), "d"(src2));
    }
  else
#endif
    {
       dst = __fadd (src1, src2); // Software FP addition function.
    }

The following built-in functions are also available on all PowerPC processors:

uint64_t __builtin_ppc_get_timebase ();
unsigned long __builtin_ppc_mftb ();
double __builtin_unpack_ibm128 (__ibm128, int);
__ibm128 __builtin_pack_ibm128 (double, double);
double __builtin_mffs (void);
void __builtin_mtfsf (const int, double);
void __builtin_mtfsb0 (const int);
void __builtin_mtfsb1 (const int);
void __builtin_set_fpscr_rn (int);

The __builtin_ppc_get_timebase and __builtin_ppc_mftb functions generate instructions to read the Time Base Register. The __builtin_ppc_get_timebase function may generate multiple instructions and always returns the 64 bits of the Time Base Register. The __builtin_ppc_mftb function always generates one instruction and returns the Time Base Register value as an unsigned long, throwing away the most significant word on 32-bit environments. The __builtin_mffs return the value of the FPSCR register. Note, ISA 3.0 supports the __builtin_mffsl() which permits software to read the control and non-sticky status bits in the FSPCR without the higher latency associated with accessing the sticky status bits. The __builtin_mtfsf takes a constant 8-bit integer field mask and a double precision floating point argument and generates the mtfsf (extended mnemonic) instruction to write new values to selected fields of the FPSCR. The __builtin_mtfsb0 and __builtin_mtfsb1 take the bit to change as an argument. The valid bit range is between 0 and 31. The builtins map to the mtfsb0 and mtfsb1 instructions which take the argument and add 32. Hence these instructions only modify the FPSCR[32:63] bits by changing the specified bit to a zero or one respectively. The __builtin_set_fpscr_rn builtin allows changing both of the floating point rounding mode bits. The argument is a 2-bit value. The argument can either be a const int or stored in a variable. The builtin uses the ISA 3.0 instruction mffscrn if available, otherwise it reads the FPSCR, masks the current rounding mode bits out and OR’s in the new value.

Next: , Up: Basic PowerPC Built-in Functions [Contents][Index]

© Free Software Foundation
Licensed under the GNU Free Documentation License, Version 1.3.
https://gcc.gnu.org/onlinedocs/gcc-11.1.0/gcc/Basic-PowerPC-Built_002din-Functions-Available-on-all-Configurations.html