Lists the capabilities of the helper, one per line, ending with a blank line. Each capability may be preceded with *, which marks them mandatory for Git versions using the remote helper to understand. Any unknown mandatory capability is a fatal error.

Support for this command is mandatory.

Lists the refs, one per line, in the format "<value> <name> [<attr> …​]". The value may be a hex sha1 hash, "@<dest>" for a symref, ":<keyword> <value>" for a key-value pair, or "?" to indicate that the helper could not get the value of the ref. A space-separated list of attributes follows the name; unrecognized attributes are ignored. The list ends with a blank line.

See REF LIST ATTRIBUTES for a list of currently defined attributes. See REF LIST KEYWORDS for a list of currently defined keywords.

Supported if the helper has the "fetch" or "import" capability.

Similar to list, except that it is used if and only if the caller wants to the resulting ref list to prepare push commands. A helper supporting both push and fetch can use this to distinguish for which operation the output of list is going to be used, possibly reducing the amount of work that needs to be performed.

Supported if the helper has the "push" or "export" capability.

Sets the transport helper option <name> to <value>. Outputs a single line containing one of ok (option successfully set), unsupported (option not recognized) or error <msg> (option <name> is supported but <value> is not valid for it). Options should be set before other commands, and may influence the behavior of those commands.

See OPTIONS for a list of currently defined options.

Supported if the helper has the "option" capability.

Fetches the given object, writing the necessary objects to the database. Fetch commands are sent in a batch, one per line, terminated with a blank line. Outputs a single blank line when all fetch commands in the same batch are complete. Only objects which were reported in the output of list with a sha1 may be fetched this way.

Optionally may output a lock <file> line indicating the full path of a file under $GIT_DIR/objects/pack which is keeping a pack until refs can be suitably updated. The path must end with .keep. This is a mechanism to name a <pack,idx,keep> tuple by giving only the keep component. The kept pack will not be deleted by a concurrent repack, even though its objects may not be referenced until the fetch completes. The .keep file will be deleted at the conclusion of the fetch.

If option check-connectivity is requested, the helper must output connectivity-ok if the clone is self-contained and connected.

Supported if the helper has the "fetch" capability.

Pushes the given local <src> commit or branch to the remote branch described by <dst>. A batch sequence of one or more push commands is terminated with a blank line (if there is only one reference to push, a single push command is followed by a blank line). For example, the following would be two batches of push, the first asking the remote-helper to push the local ref master to the remote ref master and the local HEAD to the remote branch, and the second asking to push ref foo to ref bar (forced update requested by the +).

push refs/heads/master:refs/heads/master
push HEAD:refs/heads/branch
\n
push +refs/heads/foo:refs/heads/bar
\n

Zero or more protocol options may be entered after the last push command, before the batch’s terminating blank line.

When the push is complete, outputs one or more ok <dst> or error <dst> <why>? lines to indicate success or failure of each pushed ref. The status report output is terminated by a blank line. The option field <why> may be quoted in a C style string if it contains an LF.

Supported if the helper has the "push" capability.

Produces a fast-import stream which imports the current value of the named ref. It may additionally import other refs as needed to construct the history efficiently. The script writes to a helper-specific private namespace. The value of the named ref should be written to a location in this namespace derived by applying the refspecs from the "refspec" capability to the name of the ref.

Especially useful for interoperability with a foreign versioning system.

Just like push, a batch sequence of one or more import is terminated with a blank line. For each batch of import, the remote helper should produce a fast-import stream terminated by a done command.

Note that if the bidi-import capability is used the complete batch sequence has to be buffered before starting to send data to fast-import to prevent mixing of commands and fast-import responses on the helper’s stdin.

Supported if the helper has the "import" capability.

Instructs the remote helper that any subsequent input is part of a fast-import stream (generated by git fast-export) containing objects which should be pushed to the remote.

Especially useful for interoperability with a foreign versioning system.

The export-marks and import-marks capabilities, if specified, affect this command in so far as they are passed on to git fast-export, which then will load/store a table of marks for local objects. This can be used to implement for incremental operations.

Supported if the helper has the "export" capability.

Connects to given service. Standard input and standard output of helper are connected to specified service (git prefix is included in service name so e.g. fetching uses git-upload-pack as service) on remote side. Valid replies to this command are empty line (connection established), fallback (no smart transport support, fall back to dumb transports) and just exiting with error message printed (can’t connect, don’t bother trying to fall back). After line feed terminating the positive (empty) response, the output of service starts. After the connection ends, the remote helper exits.

Supported if the helper has the "connect" capability.

Experimental; for internal use only. Connects to the given remote service for communication using git’s wire-protocol version 2. Valid replies to this command are empty line (connection established), fallback (no smart transport support, fall back to dumb transports) and just exiting with error message printed (can’t connect, don’t bother trying to fall back). After line feed terminating the positive (empty) response, the output of the service starts. Messages (both request and response) must consist of zero or more PKT-LINEs, terminating in a flush packet. Response messages will then have a response end packet after the flush packet to indicate the end of a response. The client must not expect the server to store any state in between request-response pairs. After the connection ends, the remote helper exits.

Supported if the helper has the "stateless-connect" capability.

Downloads the file from the given <uri> to the given <path>. If <path>.temp exists, then Git assumes that the .temp file is a partial download from a previous attempt and will resume the download from that position.

This ref is unchanged since the last import or fetch, although the helper cannot necessarily determine what value that produced.

The refs are using the given hash algorithm. This keyword is only used if the server and client both support the object-format extension.

Changes the verbosity of messages displayed by the helper. A value of 0 for <n> means that processes operate quietly, and the helper produces only error output. 1 is the default level of verbosity, and higher values of <n> correspond to the number of -v flags passed on the command line.

Enables (or disables) progress messages displayed by the transport helper during a command.

Deepens the history of a shallow repository.

Deepens the history of a shallow repository based on time.

Deepens the history of a shallow repository excluding ref. Multiple options add up.

Deepens the history of a shallow repository relative to current boundary. Only valid when used with "option depth".

If enabled the helper should automatically fetch annotated tag objects if the object the tag points at was transferred during the fetch command. If the tag is not fetched by the helper a second fetch command will usually be sent to ask for the tag specifically. Some helpers may be able to use this option to avoid a second network connection.

Sets service path (--upload-pack, --receive-pack etc.) for next connect. Remote helper may support this option, but must not rely on this option being set before connect request occurs.

Request the helper to check connectivity of a clone.

Request the helper to perform a force update. Defaults to false.

Notify the helper this is a clone request (i.e. the current repository is guaranteed empty).

Allow to extend .git/shallow if the new refs require it.

GPG sign pushes.

Transmit <string> as a push option. As the push option must not contain LF or NUL characters, the string is not encoded.

Indicate that these objects are being fetched from a promisor.

Indicate that only the objects wanted need to be fetched, not their dependents.

When pushing, request the remote server to update refs in a single atomic transaction. If successful, all refs will be updated, or none will. If the remote side does not support this capability, the push will fail.

If true, indicate that the caller wants hash algorithm information to be passed back from the remote. This mode is used when fetching refs.

If set to an algorithm, indicate that the caller wants to interact with the remote side using that algorithm.