This command initializes a Kubernetes worker node and joins it to the cluster.
Run this on any machine you wish to join an existing cluster
When joining a kubeadm initialized cluster, we need to establish bidirectional trust. This is split into discovery (having the Node trust the Kubernetes Control Plane) and TLS bootstrap (having the Kubernetes Control Plane trust the Node).
There are 2 main schemes for discovery. The first is to use a shared token along with the IP address of the API server. The second is to provide a file - a subset of the standard kubeconfig file. This file can be a local file or downloaded via an HTTPS URL. The forms are kubeadm join --discovery-token abcdef.1234567890abcdef 1.2.3.4:6443, kubeadm join --discovery-file path/to/file.conf, or kubeadm join --discovery-file https://url/file.conf. Only one form can be used. If the discovery information is loaded from a URL, HTTPS must be used. Also, in that case the host installed CA bundle is used to verify the connection.
If you use a shared token for discovery, you should also pass the --discovery-token-ca-cert-hash flag to validate the public key of the root certificate authority (CA) presented by the Kubernetes Control Plane. The value of this flag is specified as "<hash-type>:<hex-encoded-value>", where the supported hash type is "sha256". The hash is calculated over the bytes of the Subject Public Key Info (SPKI) object (as in RFC7469). This value is available in the output of "kubeadm init" or can be calculated using standard tools. The --discovery-token-ca-cert-hash flag may be repeated multiple times to allow more than one public key.
If you cannot know the CA public key hash ahead of time, you can pass the --discovery-token-unsafe-skip-ca-verification flag to disable this verification. This weakens the kubeadm security model since other nodes can potentially impersonate the Kubernetes Control Plane.
The TLS bootstrap mechanism is also driven via a shared token. This is used to temporarily authenticate with the Kubernetes Control Plane to submit a certificate signing request (CSR) for a locally created key pair. By default, kubeadm will set up the Kubernetes Control Plane to automatically approve these signing requests. This token is passed in with the --tls-bootstrap-token abcdef.1234567890abcdef flag.
Often times the same token is used for both parts. In this case, the --token flag can be used instead of specifying each token individually.
The "join [api-server-endpoint]" command executes the following phases:
preflight Run join pre-flight checks
control-plane-prepare Prepare the machine for serving a control plane
/download-certs [EXPERIMENTAL] Download certificates shared among control-plane nodes from the kubeadm-certs Secret
/certs Generate the certificates for the new control plane components
/kubeconfig Generate the kubeconfig for the new control plane components
/control-plane Generate the manifests for the new control plane components
kubelet-start Write kubelet settings, certificates and (re)start the kubelet
control-plane-join Join a machine as a control plane instance
/etcd Add a new local etcd member
/update-status Register the new control-plane node into the ClusterStatus maintained in the kubeadm-config ConfigMap (DEPRECATED)
/mark-control-plane Mark a node as a control-plane
kubeadm join [api-server-endpoint] [flags]
| --apiserver-advertise-address string | |
If the node should host a new control plane instance, the IP address the API Server will advertise it's listening on. If not set the default network interface will be used. | |
| --apiserver-bind-port int32 Default: 6443 | |
If the node should host a new control plane instance, the port for the API Server to bind to. | |
| --certificate-key string | |
Use this key to decrypt the certificate secrets uploaded by init. | |
| --config string | |
Path to kubeadm config file. | |
| --control-plane | |
Create a new control plane instance on this node | |
| --cri-socket string | |
Path to the CRI socket to connect. If empty kubeadm will try to auto-detect this value; use this option only if you have more than one CRI installed or if you have non-standard CRI socket. | |
| --discovery-file string | |
For file-based discovery, a file or URL from which to load cluster information. | |
| --discovery-token string | |
For token-based discovery, the token used to validate cluster information fetched from the API server. | |
| --discovery-token-ca-cert-hash strings | |
For token-based discovery, validate that the root CA public key matches this hash (format: "<type>:<value>"). | |
| --discovery-token-unsafe-skip-ca-verification | |
For token-based discovery, allow joining without --discovery-token-ca-cert-hash pinning. | |
| --dry-run | |
Don't apply any changes; just output what would be done. | |
| -h, --help | |
help for join | |
| --ignore-preflight-errors strings | |
A list of checks whose errors will be shown as warnings. Example: 'IsPrivilegedUser,Swap'. Value 'all' ignores errors from all checks. | |
| --node-name string | |
Specify the node name. | |
| --patches string | |
Path to a directory that contains files named "target[suffix][+patchtype].extension". For example, "kube-apiserver0+merge.yaml" or just "etcd.json". "target" can be one of "kube-apiserver", "kube-controller-manager", "kube-scheduler", "etcd". "patchtype" can be one of "strategic", "merge" or "json" and they match the patch formats supported by kubectl. The default "patchtype" is "strategic". "extension" must be either "json" or "yaml". "suffix" is an optional string that can be used to determine which patches are applied first alpha-numerically. | |
| --skip-phases strings | |
List of phases to be skipped | |
| --tls-bootstrap-token string | |
Specify the token used to temporarily authenticate with the Kubernetes Control Plane while joining the node. | |
| --token string | |
Use this token for both discovery-token and tls-bootstrap-token when those values are not provided. | |
| --rootfs string | |
[EXPERIMENTAL] The path to the 'real' host root filesystem. | |
kubeadm join bootstraps a Kubernetes worker node or a control-plane node and adds it to the cluster. This action consists of the following steps for worker nodes:
kubeadm downloads necessary cluster information from the API server. By default, it uses the bootstrap token and the CA key hash to verify the authenticity of that data. The root CA can also be discovered directly via a file or URL.
Once the cluster information is known, kubelet can start the TLS bootstrapping process.
The TLS bootstrap uses the shared token to temporarily authenticate with the Kubernetes API server to submit a certificate signing request (CSR); by default the control plane signs this CSR request automatically.
Finally, kubeadm configures the local kubelet to connect to the API server with the definitive identity assigned to the node.
For control-plane nodes additional steps are performed:
Downloading certificates shared among control-plane nodes from the cluster (if explicitly requested by the user).
Generating control-plane component manifests, certificates and kubeconfig.
Adding new local etcd member.
Kubeadm allows you join a node to the cluster in phases using kubeadm join phase.
To view the ordered list of phases and sub-phases you can call kubeadm join --help. The list will be located at the top of the help screen and each phase will have a description next to it. Note that by calling kubeadm join all of the phases and sub-phases will be executed in this exact order.
Some phases have unique flags, so if you want to have a look at the list of available options add --help, for example:
kubeadm join phase kubelet-start --help
Similar to the kubeadm init phase command, kubeadm join phase allows you to skip a list of phases using the --skip-phases flag.
For example:
sudo kubeadm join --skip-phases=preflight --config=config.yaml
Kubernetes v1.22 [beta] Alternatively, you can use the skipPhases field in JoinConfiguration.
The kubeadm discovery has several options, each with security tradeoffs. The right method for your environment depends on how you provision nodes and the security expectations you have about your network and node lifecycles.
This is the default mode in kubeadm. In this mode, kubeadm downloads the cluster configuration (including root CA) and validates it using the token as well as validating that the root CA public key matches the provided hash and that the API server certificate is valid under the root CA.
The CA key hash has the format sha256:<hex_encoded_hash>. By default, the hash value is returned in the kubeadm join command printed at the end of kubeadm init or in the output of kubeadm token create --print-join-command. It is in a standard format (see RFC7469) and can also be calculated by 3rd party tools or provisioning systems. For example, using the OpenSSL CLI:
openssl x509 -pubkey -in /etc/kubernetes/pki/ca.crt | openssl rsa -pubin -outform der 2>/dev/null | openssl dgst -sha256 -hex | sed 's/^.* //'
Example kubeadm join commands:
For worker nodes:
kubeadm join --discovery-token abcdef.1234567890abcdef --discovery-token-ca-cert-hash sha256:1234..cdef 1.2.3.4:6443
For control-plane nodes:
kubeadm join --discovery-token abcdef.1234567890abcdef --discovery-token-ca-cert-hash sha256:1234..cdef --control-plane 1.2.3.4:6443
You can also call join for a control-plane node with --certificate-key to copy certificates to this node, if the kubeadm init command was called with --upload-certs.
Advantages:
Allows bootstrapping nodes to securely discover a root of trust for the control-plane node even if other worker nodes or the network are compromised.
Convenient to execute manually since all of the information required fits into a single kubeadm join command.
Disadvantages:
This mode relies only on the symmetric token to sign (HMAC-SHA256) the discovery information that establishes the root of trust for the control-plane. To use the mode the joining nodes must skip the hash validation of the CA public key, using --discovery-token-unsafe-skip-ca-verification. You should consider using one of the other modes if possible.
Example kubeadm join command:
kubeadm join --token abcdef.1234567890abcdef --discovery-token-unsafe-skip-ca-verification 1.2.3.4:6443
Advantages:
Still protects against many network-level attacks.
The token can be generated ahead of time and shared with the control-plane node and worker nodes, which can then bootstrap in parallel without coordination. This allows it to be used in many provisioning scenarios.
Disadvantages:
This provides an out-of-band way to establish a root of trust between the control-plane node and bootstrapping nodes. Consider using this mode if you are building automated provisioning using kubeadm. The format of the discovery file is a regular Kubernetes kubeconfig file.
In case the discovery file does not contain credentials, the TLS discovery token will be used.
Example kubeadm join commands:
kubeadm join --discovery-file path/to/file.conf (local file)
kubeadm join --discovery-file https://url/file.conf (remote HTTPS URL)
Advantages:
Disadvantages:
The defaults for kubeadm may not work for everyone. This section documents how to tighten up a kubeadm installation at the cost of some usability.
By default, there is a CSR auto-approver enabled that basically approves any client certificate request for a kubelet when a Bootstrap Token was used when authenticating. If you don't want the cluster to automatically approve kubelet client certs, you can turn it off by executing this command:
kubectl delete clusterrolebinding kubeadm:node-autoapprove-bootstrap
After that, kubeadm join will block until the admin has manually approved the CSR in flight:
kubectl get csr
The output is similar to this:
NAME AGE REQUESTOR CONDITION
node-csr-c69HXe7aYcqkS1bKmH4faEnHAWxn6i2bHZ2mD04jZyQ 18s system:bootstrap:878f07 Pending
kubectl certificate approve node-csr-c69HXe7aYcqkS1bKmH4faEnHAWxn6i2bHZ2mD04jZyQ
The output is similar to this:
certificatesigningrequest "node-csr-c69HXe7aYcqkS1bKmH4faEnHAWxn6i2bHZ2mD04jZyQ" approved
kubectl get csr
The output is similar to this:
NAME AGE REQUESTOR CONDITION
node-csr-c69HXe7aYcqkS1bKmH4faEnHAWxn6i2bHZ2mD04jZyQ 1m system:bootstrap:878f07 Approved,Issued
This forces the workflow that kubeadm join will only succeed if kubectl certificate approve has been run.
In order to achieve the joining flow using the token as the only piece of validation information, a ConfigMap with some data needed for validation of the control-plane node's identity is exposed publicly by default. While there is no private data in this ConfigMap, some users might wish to turn it off regardless. Doing so will disable the ability to use the --discovery-token flag of the kubeadm join flow. Here are the steps to do so:
cluster-info file from the API Server:kubectl -n kube-public get cm cluster-info -o yaml | grep "kubeconfig:" -A11 | grep "apiVersion" -A10 | sed "s/ //" | tee cluster-info.yaml
The output is similar to this:
apiVersion: v1
kind: Config
clusters:
- cluster:
certificate-authority-data: <ca-cert>
server: https://<ip>:<port>
name: ""
contexts: []
current-context: ""
preferences: {}
users: []
Use the cluster-info.yaml file as an argument to kubeadm join --discovery-file.
Turn off public access to the cluster-info ConfigMap:
kubectl -n kube-public delete rolebinding kubeadm:bootstrap-signer-clusterinfo
These commands should be run after kubeadm init but before kubeadm join.
It's possible to configure kubeadm join with a configuration file instead of command line flags, and some more advanced features may only be available as configuration file options. This file is passed using the --config flag and it must contain a JoinConfiguration structure. Mixing --config with others flags may not be allowed in some cases.
The default configuration can be printed out using the kubeadm config print command.
If your configuration is not using the latest version it is recommended that you migrate using the kubeadm config migrate command.
For more information on the fields and usage of the configuration you can navigate to our API reference.
kubeadm join
kubeadm init or kubeadm join
© 2022 The Kubernetes Authors
Documentation Distributed under CC BY 4.0.
https://kubernetes.io/docs/reference/setup-tools/kubeadm/kubeadm-join