There are a several options and system variables related to the MariaDB Audit Plugin, once it has been installed. System variables can be displayed using the SHOW VARIABLES statement like so:

SHOW GLOBAL VARIABLES LIKE '%server_audit%';

+-------------------------------+-----------------------+
| Variable_name                 | Value                 |
+-------------------------------+-----------------------+
| server_audit_events           | CONNECT,QUERY,TABLE   |
| server_audit_excl_users       |                       |
| server_audit_file_path        | server_audit.log      |
| server_audit_file_rotate_now  | OFF                   |
| server_audit_file_rotate_size | 1000000               |
| server_audit_file_rotations   | 9                     |
| server_audit_incl_users       |                       |
| server_audit_logging          | ON                    |
| server_audit_mode             | 0                     |
| server_audit_output_type      | file                  |
| server_audit_query_log_limit  | 1024                  |
| server_audit_syslog_facility  | LOG_USER              |
| server_audit_syslog_ident     | mysql-server_auditing |
| server_audit_syslog_info      |                       |
| server_audit_syslog_priority  | LOG_INFO              |
+-------------------------------+-----------------------+

To change the value of one of these variables, you can use the SET statement, or set them at the command-line when starting MariaDB. It's recommended that you set them in the MariaDB configuration for the server like so:

[mariadb]
...
server_audit_excl_users='bob,ted'
...

System Variables

Below is a list of all system variables related to the Audit Plugin. See Server System Variables for a complete list of system variables and instructions on setting them. See also the full list of MariaDB options, system and status variables.

server_audit_events

• Description: If set, then this restricts audit logging to certain event types. If not set, then every event type is logged to the audit log. For example: SET GLOBAL server_audit_events='connect, query'
• Commandline: --server-audit-events=value
• Scope: Global
• Dynamic: Yes
• Data Type: string
• Default Value: Empty string
• Valid Values:
  • CONNECT, QUERY, TABLE (MariaDB Audit Plugin < 1.2.0)
  • CONNECT, QUERY, TABLE, QUERY_DDL, QUERY_DML (MariaDB Audit Plugin >= 1.2.0)
  • CONNECT, QUERY, TABLE, QUERY_DDL, QUERY_DML, QUERY_DCL (MariaDB Audit Plugin >=1.3.0)
  • CONNECT, QUERY, TABLE, QUERY_DDL, QUERY_DML, QUERY_DCL, QUERY_DML_NO_SELECT (MariaDB Audit Plugin >= 1.4.4)
  • See MariaDB Audit Plugin - Versions to determine which MariaDB releases contain each MariaDB Audit Plugin versions.

server_audit_excl_users

• Description: If not empty, it contains the list of users whose activity will NOT be logged. For example: SET GLOBAL server_audit_excl_users='user_foo, user_bar'. CONNECT records aren't affected by this variable - they are always logged. The user is still logged if it's specified in server_audit_incl_users.
• Commandline: --server-audit-excl-users=value
• Scope: Global
• Dynamic: Yes
• Data Type: string
• Default Value: Empty string
• Size limit: 1024 characters

server_audit_file_path

• Description: When server_audit_output_type=file, sets the path and the filename to the log file. If the specified path exists as a directory, then the log will be created inside that directory with the name 'server_audit.log'. Otherwise the value is treated as a filename. The default value is 'server_audit.log', which means this file will be created in the database directory.
• Commandline: --server-audit-file-path=value
• Scope: Global
• Dynamic: Yes
• Data Type: string
• Default Value: server_audit.log

server_audit_file_rotate_now

• Description: When server_audit_output_type=file, the user can force the log file rotation by setting this variable to ON or 1.
• Commandline: --server-audit-rotate-now[={0|1}]
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF

server_audit_file_rotate_size

• Description: When server_audit_output_type=file, it limits the size of the log file. Reaching that limit turns on the rotation - the current log file is renamed as 'file_path.1'. The empty log file is created as 'file_path' to log into it. The default value is 1000000.
• Commandline: --server-audit-rotate-size=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 1000000

server_audit_file_rotations

• Description: When server_audit_output_type=file', this specifies the number of rotations to save. If set to 0 then the log never rotates. The default value is 9.
• Commandline: --server-audit-rotations=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 9
• Range: 0 to 999

server_audit_incl_users

• Description: If not empty, it contains a comma-delimited list of users whose activity will be logged. For example: SET GLOBAL server_audit_incl_users='user_foo, user_bar'. CONNECT records aren't affected by this variable - they are always logged. This setting has higher priority than server_audit_excl_users. So if the same user is specified both in incl_ and excl_ lists, they will still be logged.
• Commandline: --server-audit-incl-users=value
• Scope: Global
• Dynamic: Yes
• Data Type: string
• Default Value: Empty string
• Size limit: 1024 characters

server_audit_loc_info

• Description: Used by plugin internals. It has no useful meaning to users.
  • In earlier versions, users see it as a read-only variable.
  • In later versions, it is hidden from the user.
• Commandline: N/A
• Scope: Global
• Dynamic: No
• Data Type: string
• Default Value: Empty string
• Introduced: MariaDB 10.1.12, MariaDB 10.0.24, MariaDB 5.5.48
• Hidden: MariaDB 10.1.18, MariaDB 10.0.28, MariaDB 5.5.53

server_audit_logging

• Description: Enables/disables the logging. Expected values are ON/OFF. For example: SET GLOBAL server_audit_logging=on If the server_audit_output_type is FILE, this will actually create/open the logfile so the server_audit_file_path should be properly specified beforehand. Same about the SYSLOG-related parameters. The logging is turned off by default.
• Commandline: --server-audit-logging[={0|1}]
• Scope: Global
• Dynamic: Yes
• Data Type: boolean
• Default Value: OFF

server_audit_mode

• Description: This variable doesn't have any distinctive meaning for a user. Its value mostly reflects the server version with which the plugin was started and is intended to be used by developers for testing.
• Commandline: --server-audit-mode[=#]

server_audit_output_type

• Description: Specifies the desired output type. Can be SYSLOG or FILE. For example: SET GLOBAL server_audit_output_type=file file: log records will be saved into the rotating log file. The name of the file set by server_audit_file_path variable. syslog: log records will be sent to the local syslogd daemon with the standard <syslog.h> API. The default value is 'file'.
• Commandline: --server-audit-output-type=value
• Scope: Global
• Dynamic: Yes
• Data Type: enum
• Default Value: file
• Valid Values: SYSLOG or FILE

server_audit_query_log_limit

• Description: Limit on the length of the query string in a record.
• Commandline: --server-audit-query-log-limit=#
• Scope: Global
• Dynamic: Yes
• Data Type: numeric
• Default Value: 1024
• Range: 0 to 2147483647
• Introduced: MariaDB 5.5.43, MariaDB 10.0.18, MariaDB 10.1.5

server_audit_syslog_facility

• Description: SYSLOG-mode variable. It defines the 'facility' of the records that will be sent to the syslog. Later the log can be filtered by this parameter.
• Commandline: --server-audit-syslog-facility=value
• Scope: Global
• Dynamic: Yes
• Data Type: enum
• Default Value: LOG_USER
• Valid Values: LOG_USER, LOG_MAIL, LOG_DAEMON, LOG_AUTH, LOG_SYSLOG, LOG_LPR, LOG_NEWS, LOG_UUCP, LOG_CRON, LOG_AUTHPRIV, LOG_FTP, and LOG_LOCAL0–LOG_LOCAL7.

server_audit_syslog_ident

• Description: SYSLOG-mode variable. String value for the 'ident' part of each syslog record. Default value is 'mysql-server_auditing'. New value becomes effective only after restarting the logging.
• Commandline: --server-audit-syslog-ident=value
• Scope: Global
• Dynamic: Yes
• Data Type: string
• Default Value: mysql-server_auditing

server_audit_syslog_info

• Description: SYSLOG-mode variable. The 'info' string to be added to the syslog records. Can be changed any time.
• Commandline: --server-audit-syslog-info=value
• Scope: Global
• Dynamic: Yes
• Data Type: string
• Default Value: Empty string

server_audit_syslog_priority

• Description: SYSLOG-mode variable. Defines the priority of the log records for the syslogd.
• Commandline: --server-audit-syslog-priority=value
• Scope: Global
• Dynamic: Yes
• Data Type: enum
• Default Value: LOG_INFO
• Valid Values:LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR, LOG_WARNING, LOG_NOTICE, LOG_INFO, LOG_DEBUG

Options

server_audit

• Description: Controls how the server should treat the plugin when the server starts up.
  • Valid values are:
    • OFF - Disables the plugin without removing it from the mysql.plugins table.
    • ON - Enables the plugin. If the plugin cannot be initialized, then the server will still continue starting up, but the plugin will be disabled.
    • FORCE - Enables the plugin. If the plugin cannot be initialized, then the server will fail to start with an error.
    • FORCE_PLUS_PERMANENT - Enables the plugin. If the plugin cannot be initialized, then the server will fail to start with an error. In addition, the plugin cannot be uninstalled with UNINSTALL SONAME or UNINSTALL PLUGIN while the server is running.
  • See MariaDB Audit Plugin - Installation: Prohibiting Uninstallation for more information on one use case.
  • See Plugin Overview: Configuring Plugin Activation at Server Startup for more information.
• Commandline: --server-audit=val
• Data Type: enumerated
• Default Value: ON
• Valid Values: OFF, ON, FORCE, FORCE_PLUS_PERMANENT