You have a website with news articles, or a blog, or some other thing with a list of things that might be too long for a single page. So, you decide to break it into chunks of, say, 10 items and provide a [Next] button to go the next "page".
You spot OFFSET and LIMIT in MariaDB and decide that is the obvious way to do it.
SELECT * FROM items WHERE messy_filtering ORDER BY date DESC OFFSET $M LIMIT $N
Note that the problem requirement needs a [Next] link on each page so that the user can 'page' through the data. He does not really need "GoTo Page #". Jump to the [First] or [Last] page may be useful.
All is well -- until you have 50,000 items in a list. And someone tries to walk through all 5000 pages. That 'someone' could be a search engine crawler.
Where's the problem? Performance. Your web page is doing "SELECT ... OFFSET 49990 LIMIT 10" (or the equivalent "LIMIT 49990,10"). MariaDB has to find all 50,000 rows, step over the first 49,990, then deliver the 10 for that distant page.
If it is a crawler ('spider') that read all the pages, then it actually touched about 125,000,000 items to read all 5,000 pages.
Reading the entire table, just to get a distant page, can be so much I/O that it can cause timeouts on the web page. Or it can interfere with other activity, causing other things to be slow.
In addition to a performance problem, ...
Hardware? No, that's just a bandaid. The data will continue to grow and even the new hardware won't handle it.
Better INDEX? No. You must get away from reading the entire table to get the 5000th page.
Build another table saying where the pages start? Get real! That would be a maintenance nightmare, and expensive.
Bottom line: Don't use OFFSET; instead remember where you "left off".
First page (latest 10 items): SELECT ... WHERE ... ORDER BY id DESC LIMIT 10 Next page (second 10): SELECT ... WHERE ... AND id < $left_off ORDER BY id DESC LIMIT 10
With INDEX(id), this suddenly becomes very efficient.
You are probably doing this now: ORDER BY datetime DESC LIMIT 49990,10 You probably have some unique id on the table. This can probably be used for "left off".
Currently, the [Next] button probably has a url something like ?topic=xyz&page=4999&limit=10 The 'topic' (or 'tag' or 'provider' or 'user' or etc) says which set of items are being displayed. The product of page*limit gives the OFFSET. (The "limit=10" might be in the url, or might be hard-coded; this choice is not relevant to this discussion.)
The new variant would be ?topic=xyz&id=12345&limit=10. (Note: the 12345 is not computable from 4999.) By using INDEX(topic, id) you can efficiently say
WHERE topic = 'xyz' AND id >= 1234 ORDER BY id LIMIT 10
That will hit only 10 rows. This is a huge improvement for later pages. Now for more details.
What if there are exactly 10 rows left when you display the current page? It would make the UI nice if you grayed out the [Next] button, wouldn't it. (Or you could suppress the button all together.)
How to do that? Instead of LIMIT 10, use LIMIT 11. That will give you the 10 items needed for the current page, plus an indication of whether there is another page. And the id for that page.
So, take the 11th id for the [Next] button: <a href=?topic=xyz&id=$id11&limit=10>Next</a>
Let's extend the 11 trick to also find the next 5 pages and build links for them.
Plan A is to say LIMIT 51. If you are on page 12, that would give you links for pages 13 (using 11th id) through pages 17 (51st).
Plan B is to do two queries, one to get the 10 items for the current page, the other to get the next 41 ids (LIMIT 10, 41) for the next 5 pages.
Which plan to pick? It depends on many things, so benchmark.
Reaching forward and backward by 5 pages is not too much work. It would take two separate queries to find the ids in both directions. Also, having links that take you to the First and Last pages would be easy to do. No id is needed; they can be something like
<a href=?topic=xyz&id=FIRST&limit=10>First</a> <a href=?topic=xyz&id=LAST&limit=10>Last</a>
The UI would recognize those, then generate a SELECT with something like
WHERE topic = 'xyz' ORDER BY id ASC -- ASC for First; DESC for Last LIMIT 10
The last items would be delivered in reverse order. Either deal with that in the UI, or make the SELECT more complex:
( SELECT ... WHERE topic = 'xyz' ORDER BY id DESC LIMIT 10 ) ORDER BY id ASC
Let's say you are on page 12 of lots of pages. It could show these links:
[First] ...      12      ... [Last]
where the ellipsis is really used. Some end cases:
Page one of three: First   Page one of many: First     ... [Last] Page two of many: [First] 2    ... [Last] If you jump to the Last page, you don't know what page number it is. So, the best you can do is perhaps: [First] ... [Prev] Last
The goal is to touch only the relevant rows, not all the rows leading up to the desired rows. This is nicely achieved, except for building links to the "next 5 pages". That may (or may not) be efficiently resolved by the simple SELECT id, discussed above. The reason that may not be efficient deals with the WHERE clause.
Let's discuss the optimal and suboptimal indexes.
For this discussion, I am assuming
Very efficient -- it does all the work in the index:
INDEX(topic, id) WHERE topic = 'xyz' AND id >= 876 ORDER BY id ASC LIMIT 10,41 <</code?? That will hit 51 consecutive index entries, 0 data rows. Inefficient -- it must reach into the data: <<code>> INDEX(topic, id) WHERE topic = 'xyz' AND id >= 876 AND is_deleted = 0 ORDER BY id ASC LIMIT 10,41
That will hit at least 51 consecutive index entries, plus at least 51 _randomly_ located data rows.
Efficient -- back to the previous degree of efficiency:
INDEX(topic, is_deleted, id) WHERE topic = 'xyz' AND id >= 876 AND is_deleted = 0 ORDER BY id ASC LIMIT 10,41
Note how all the '=' parts of the WHERE come first; then comes both the '>=' and 'ORDER BY', both on id. This means that the INDEX can be used for all the WHERE, plus the ORDER BY.
You lose the "out of" except when the count is small. Instead, say something like
Items 11-20 out of Many
Alternatively... Only a few searches will have too many items to count. Keep another table with the search criteria and a count. This count can be computed daily (or hourly) by some background script. When discovering that the topic is a busy one, look it up in the table to get
Items 11-20 out of about 49,000
The background script would round the count off.
The quick way to get an _estimated_ number of rows for an InnoDB table is
SELECT table_rows FROM information_schema.TABLES WHERE TABLE_SCHEMA = 'database_name' AND TABLE_NAME = 'table_name'
However, it does not allow for the WHERE clause that you probably have.
If the search criteria cannot be confined to an INDEX in a single table, this technique is doomed. I have another paper that discusses "Lists", which solves that (which extra development work), and even improves on what is discussed here.
This depends on
Designed about 2007; posted 2012.
Rick James graciously allowed us to use this article in the Knowledge Base.
Rick James' site has other useful tips, how-tos, optimizations, and debugging tips.
Original source: http://mysql.rjweb.org/doc.php/pagination
© 2019 MariaDB
Licensed under the Creative Commons Attribution 3.0 Unported License and the GNU Free Documentation License.