W3cubDocs

/Matplotlib 3.5

matplotlib.quiver.Quiver

classmatplotlib.quiver.Quiver(ax, *args, scale=None, headwidth=3, headlength=5, headaxislength=4.5, minshaft=1, minlength=1, units='width', scale_units=None, angles='uv', width=None, color='k', pivot='tail', **kw)[source]

Bases: matplotlib.collections.PolyCollection

Specialized PolyCollection for arrows.

The only API method is set_UVC(), which can be used to change the size, orientation, and color of the arrows; their locations are fixed when the class is instantiated. Possibly this method will be useful in animations.

Much of the work in this class is done in the draw() method so that as much information as possible is available about the plot. In subsequent draw() calls, recalculation is limited to things that might have changed, so there should be no performance penalty from putting the calculations in the draw() method.

The constructor takes one required argument, an Axes instance, followed by the args and kwargs described by the following pyplot interface documentation:

Plot a 2D field of arrows.

Call signature:

quiver([X, Y], U, V, [C], **kw)

X, Y define the arrow locations, U, V define the arrow directions, and C optionally sets the color.

Each arrow is internally represented by a filled polygon with a default edge linewidth of 0. As a result, an arrow is rather a filled area, not a line with a head, and PolyCollection properties like linewidth, linestyle, facecolor, etc. act accordingly.

Arrow size

The default settings auto-scales the length of the arrows to a reasonable size. To change this behavior see the scale and scale_units parameters.

Arrow shape

The defaults give a slightly swept-back arrow; to make the head a triangle, make headaxislength the same as headlength. To make the arrow more pointed, reduce headwidth or increase headlength and headaxislength. To make the head smaller relative to the shaft, scale down all the head parameters. You will probably do best to leave minshaft alone.

Arrow outline

linewidths and edgecolors can be used to customize the arrow outlines.

Parameters
X, Y1D or 2D array-like, optional

The x and y coordinates of the arrow locations.

If not given, they will be generated as a uniform integer meshgrid based on the dimensions of U and V.

If X and Y are 1D but U, V are 2D, X, Y are expanded to 2D using X, Y = np.meshgrid(X, Y). In this case len(X) and len(Y) must match the column and row dimensions of U and V.

U, V1D or 2D array-like

The x and y direction components of the arrow vectors.

They must have the same number of elements, matching the number of arrow locations. U and V may be masked. Only locations unmasked in U, V, and C will be drawn.

C1D or 2D array-like, optional

Numeric data that defines the arrow colors by colormapping via norm and cmap.

This does not support explicit colors. If you want to set colors directly, use color instead. The size of C must match the number of arrow locations.

units{'width', 'height', 'dots', 'inches', 'x', 'y', 'xy'}, default: 'width'

The arrow dimensions (except for length) are measured in multiples of this unit.

The following values are supported:

  • 'width', 'height': The width or height of the axis.
  • 'dots', 'inches': Pixels or inches based on the figure dpi.
  • 'x', 'y', 'xy': X, Y or \(\sqrt{X^2 + Y^2}\) in data units.

The arrows scale differently depending on the units. For 'x' or 'y', the arrows get larger as one zooms in; for other units, the arrow size is independent of the zoom state. For 'width or 'height', the arrow size increases with the width and height of the axes, respectively, when the window is resized; for 'dots' or 'inches', resizing does not change the arrows.

angles{'uv', 'xy'} or array-like, default: 'uv'

Method for determining the angle of the arrows.

  • 'uv': The arrow axis aspect ratio is 1 so that if U == V the orientation of the arrow on the plot is 45 degrees counter-clockwise from the horizontal axis (positive to the right).

    Use this if the arrows symbolize a quantity that is not based on X, Y data coordinates.

  • 'xy': Arrows point from (x, y) to (x+u, y+v). Use this for plotting a gradient field, for example.
  • Alternatively, arbitrary angles may be specified explicitly as an array of values in degrees, counter-clockwise from the horizontal axis.

    In this case U, V is only used to determine the length of the arrows.

Note: inverting a data axis will correspondingly invert the arrows only with angles='xy'.

scalefloat, optional

Number of data units per arrow length unit, e.g., m/s per plot width; a smaller scale parameter makes the arrow longer. Default is None.

If None, a simple autoscaling algorithm is used, based on the average vector length and the number of vectors. The arrow length unit is given by the scale_units parameter.

scale_units{'width', 'height', 'dots', 'inches', 'x', 'y', 'xy'}, optional

If the scale kwarg is None, the arrow length unit. Default is None.

e.g. scale_units is 'inches', scale is 2.0, and (u, v) = (1, 0), then the vector will be 0.5 inches long.

If scale_units is 'width' or 'height', then the vector will be half the width/height of the axes.

If scale_units is 'x' then the vector will be 0.5 x-axis units. To plot vectors in the x-y plane, with u and v having the same units as x and y, use angles='xy', scale_units='xy', scale=1.

widthfloat, optional

Shaft width in arrow units; default depends on choice of units, above, and number of vectors; a typical starting value is about 0.005 times the width of the plot.

headwidthfloat, default: 3

Head width as multiple of shaft width.

headlengthfloat, default: 5

Head length as multiple of shaft width.

headaxislengthfloat, default: 4.5

Head length at shaft intersection.

minshaftfloat, default: 1

Length below which arrow scales, in units of head length. Do not set this to less than 1, or small arrows will look terrible!

minlengthfloat, default: 1

Minimum length as a multiple of shaft width; if an arrow length is less than this, plot a dot (hexagon) of this diameter instead.

pivot{'tail', 'mid', 'middle', 'tip'}, default: 'tail'

The part of the arrow that is anchored to the X, Y grid. The arrow rotates about this point.

'mid' is a synonym for 'middle'.

colorcolor or color sequence, optional

Explicit color(s) for the arrows. If C has been set, color has no effect.

This is a synonym for the PolyCollection facecolor parameter.

Returns
Quiver
Other Parameters
dataindexable object, optional

DATA_PARAMETER_PLACEHOLDER

**kwargsPolyCollection properties, optional

All other keyword arguments are passed on to PolyCollection:

Property

Description

agg_filter

a filter function, which takes a (m, n, 3) float array and a dpi value, and returns a (m, n, 3) array

alpha

array-like or scalar or None

animated

bool

antialiased or aa or antialiaseds

bool or list of bools

array

array-like or None

capstyle

CapStyle or {'butt', 'projecting', 'round'}

clim

(vmin: float, vmax: float)

clip_box

Bbox

clip_on

bool

clip_path

Patch or (Path, Transform) or None

cmap

Colormap or str or None

color

color or list of rgba tuples

edgecolor or ec or edgecolors

color or list of colors or 'face'

facecolor or facecolors or fc

color or list of colors

figure

Figure

gid

str

hatch

{'/', '\', '|', '-', '+', 'x', 'o', 'O', '.', '*'}

in_layout

bool

joinstyle

JoinStyle or {'miter', 'round', 'bevel'}

label

object

linestyle or dashes or linestyles or ls

str or tuple or list thereof

linewidth or linewidths or lw

float or list of floats

norm

Normalize or None

offset_transform

Transform

offsets

(N, 2) or (2,) array-like

path_effects

AbstractPathEffect

paths

list of array-like

picker

None or bool or float or callable

pickradius

float

rasterized

bool

sizes

ndarray or None

sketch_params

(scale: float, length: float, randomness: float)

snap

bool or None

transform

Transform

url

str

urls

list of str or None

verts

list of array-like

verts_and_codes

unknown

visible

bool

zorder

float

See also

Axes.quiverkey

Add a key to a quiver plot.

draw(renderer)[source]

Draw the Artist (and its children) using the given renderer.

This has no effect if the artist is not visible (Artist.get_visible returns False).

Parameters
rendererRendererBase subclass.

Notes

This method is overridden in the Artist subclasses.

get_datalim(transData)[source]
quiver_doc="\nPlot a 2D field of arrows.\n\nCall signature::\n\n quiver([X, Y], U, V, [C], **kw)\n\n*X*, *Y* define the arrow locations, *U*, *V* define the arrow directions, and\n*C* optionally sets the color.\n\nEach arrow is internally represented by a filled polygon with a default edge\nlinewidth of 0. As a result, an arrow is rather a filled area, not a line with\na head, and `.PolyCollection` properties like *linewidth*, *linestyle*,\n*facecolor*, etc. act accordingly.\n\n**Arrow size**\n\nThe default settings auto-scales the length of the arrows to a reasonable size.\nTo change this behavior see the *scale* and *scale_units* parameters.\n\n**Arrow shape**\n\nThe defaults give a slightly swept-back arrow; to make the head a\ntriangle, make *headaxislength* the same as *headlength*. To make the\narrow more pointed, reduce *headwidth* or increase *headlength* and\n*headaxislength*. To make the head smaller relative to the shaft,\nscale down all the head parameters. You will probably do best to leave\nminshaft alone.\n\n**Arrow outline**\n\n*linewidths* and *edgecolors* can be used to customize the arrow\noutlines.\n\nParameters\n----------\nX, Y : 1D or 2D array-like, optional\n The x and y coordinates of the arrow locations.\n\n If not given, they will be generated as a uniform integer meshgrid based\n on the dimensions of *U* and *V*.\n\n If *X* and *Y* are 1D but *U*, *V* are 2D, *X*, *Y* are expanded to 2D\n using ``X, Y = np.meshgrid(X, Y)``. In this case ``len(X)`` and ``len(Y)``\n must match the column and row dimensions of *U* and *V*.\n\nU, V : 1D or 2D array-like\n The x and y direction components of the arrow vectors.\n\n They must have the same number of elements, matching the number of arrow\n locations. *U* and *V* may be masked. Only locations unmasked in\n *U*, *V*, and *C* will be drawn.\n\nC : 1D or 2D array-like, optional\n Numeric data that defines the arrow colors by colormapping via *norm* and\n *cmap*.\n\n This does not support explicit colors. If you want to set colors directly,\n use *color* instead. The size of *C* must match the number of arrow\n locations.\n\nunits : {'width', 'height', 'dots', 'inches', 'x', 'y', 'xy'}, default: 'width'\n The arrow dimensions (except for *length*) are measured in multiples of\n this unit.\n\n The following values are supported:\n\n - 'width', 'height': The width or height of the axis.\n - 'dots', 'inches': Pixels or inches based on the figure dpi.\n - 'x', 'y', 'xy': *X*, *Y* or :math:`\\sqrt{X^2 + Y^2}` in data units.\n\n The arrows scale differently depending on the units. For\n 'x' or 'y', the arrows get larger as one zooms in; for other\n units, the arrow size is independent of the zoom state. For\n 'width or 'height', the arrow size increases with the width and\n height of the axes, respectively, when the window is resized;\n for 'dots' or 'inches', resizing does not change the arrows.\n\nangles : {'uv', 'xy'} or array-like, default: 'uv'\n Method for determining the angle of the arrows.\n\n - 'uv': The arrow axis aspect ratio is 1 so that\n if *U* == *V* the orientation of the arrow on the plot is 45 degrees\n counter-clockwise from the horizontal axis (positive to the right).\n\n Use this if the arrows symbolize a quantity that is not based on\n *X*, *Y* data coordinates.\n\n - 'xy': Arrows point from (x, y) to (x+u, y+v).\n Use this for plotting a gradient field, for example.\n\n - Alternatively, arbitrary angles may be specified explicitly as an array\n of values in degrees, counter-clockwise from the horizontal axis.\n\n In this case *U*, *V* is only used to determine the length of the\n arrows.\n\n Note: inverting a data axis will correspondingly invert the\n arrows only with ``angles='xy'``.\n\nscale : float, optional\n Number of data units per arrow length unit, e.g., m/s per plot width; a\n smaller scale parameter makes the arrow longer. Default is *None*.\n\n If *None*, a simple autoscaling algorithm is used, based on the average\n vector length and the number of vectors. The arrow length unit is given by\n the *scale_units* parameter.\n\nscale_units : {'width', 'height', 'dots', 'inches', 'x', 'y', 'xy'}, optional\n If the *scale* kwarg is *None*, the arrow length unit. Default is *None*.\n\n e.g. *scale_units* is 'inches', *scale* is 2.0, and ``(u, v) = (1, 0)``,\n then the vector will be 0.5 inches long.\n\n If *scale_units* is 'width' or 'height', then the vector will be half the\n width/height of the axes.\n\n If *scale_units* is 'x' then the vector will be 0.5 x-axis\n units. To plot vectors in the x-y plane, with u and v having\n the same units as x and y, use\n ``angles='xy', scale_units='xy', scale=1``.\n\nwidth : float, optional\n Shaft width in arrow units; default depends on choice of units,\n above, and number of vectors; a typical starting value is about\n 0.005 times the width of the plot.\n\nheadwidth : float, default: 3\n Head width as multiple of shaft width.\n\nheadlength : float, default: 5\n Head length as multiple of shaft width.\n\nheadaxislength : float, default: 4.5\n Head length at shaft intersection.\n\nminshaft : float, default: 1\n Length below which arrow scales, in units of head length. Do not\n set this to less than 1, or small arrows will look terrible!\n\nminlength : float, default: 1\n Minimum length as a multiple of shaft width; if an arrow length\n is less than this, plot a dot (hexagon) of this diameter instead.\n\npivot : {'tail', 'mid', 'middle', 'tip'}, default: 'tail'\n The part of the arrow that is anchored to the *X*, *Y* grid. The arrow\n rotates about this point.\n\n 'mid' is a synonym for 'middle'.\n\ncolor : color or color sequence, optional\n Explicit color(s) for the arrows. If *C* has been set, *color* has no\n effect.\n\n This is a synonym for the `.PolyCollection` *facecolor* parameter.\n\nOther Parameters\n----------------\ndata : indexable object, optional\n DATA_PARAMETER_PLACEHOLDER\n\n**kwargs : `~matplotlib.collections.PolyCollection` properties, optional\n All other keyword arguments are passed on to `.PolyCollection`:\n\n \n .. table::\n :class: property-table\n\n ================================================================================================= =====================================================================================================\n Property Description \n ================================================================================================= =====================================================================================================\n :meth:`agg_filter <matplotlib.artist.Artist.set_agg_filter>` a filter function, which takes a (m, n, 3) float array and a dpi value, and returns a (m, n, 3) array\n :meth:`alpha <matplotlib.collections.Collection.set_alpha>` array-like or scalar or None \n :meth:`animated <matplotlib.artist.Artist.set_animated>` bool \n :meth:`antialiased <matplotlib.collections.Collection.set_antialiased>` or aa or antialiaseds bool or list of bools \n :meth:`array <matplotlib.cm.ScalarMappable.set_array>` array-like or None \n :meth:`capstyle <matplotlib.collections.Collection.set_capstyle>` `.CapStyle` or {'butt', 'projecting', 'round'} \n :meth:`clim <matplotlib.cm.ScalarMappable.set_clim>` (vmin: float, vmax: float) \n :meth:`clip_box <matplotlib.artist.Artist.set_clip_box>` `.Bbox` \n :meth:`clip_on <matplotlib.artist.Artist.set_clip_on>` bool \n :meth:`clip_path <matplotlib.artist.Artist.set_clip_path>` Patch or (Path, Transform) or None \n :meth:`cmap <matplotlib.cm.ScalarMappable.set_cmap>` `.Colormap` or str or None \n :meth:`color <matplotlib.collections.Collection.set_color>` color or list of rgba tuples \n :meth:`edgecolor <matplotlib.collections.Collection.set_edgecolor>` or ec or edgecolors color or list of colors or 'face' \n :meth:`facecolor <matplotlib.collections.Collection.set_facecolor>` or facecolors or fc color or list of colors \n :meth:`figure <matplotlib.artist.Artist.set_figure>` `.Figure` \n :meth:`gid <matplotlib.artist.Artist.set_gid>` str \n :meth:`hatch <matplotlib.collections.Collection.set_hatch>` {'/', '\\\\', '|', '-', '+', 'x', 'o', 'O', '.', '*'} \n :meth:`in_layout <matplotlib.artist.Artist.set_in_layout>` bool \n :meth:`joinstyle <matplotlib.collections.Collection.set_joinstyle>` `.JoinStyle` or {'miter', 'round', 'bevel'} \n :meth:`label <matplotlib.artist.Artist.set_label>` object \n :meth:`linestyle <matplotlib.collections.Collection.set_linestyle>` or dashes or linestyles or ls str or tuple or list thereof \n :meth:`linewidth <matplotlib.collections.Collection.set_linewidth>` or linewidths or lw float or list of floats \n :meth:`norm <matplotlib.cm.ScalarMappable.set_norm>` `.Normalize` or None \n :meth:`offset_transform <matplotlib.collections.Collection.set_offset_transform>` `.Transform` \n :meth:`offsets <matplotlib.collections.Collection.set_offsets>` (N, 2) or (2,) array-like \n :meth:`path_effects <matplotlib.artist.Artist.set_path_effects>` `.AbstractPathEffect` \n :meth:`paths <matplotlib.collections.PolyCollection.set_verts>` list of array-like \n :meth:`picker <matplotlib.artist.Artist.set_picker>` None or bool or float or callable \n :meth:`pickradius <matplotlib.collections.Collection.set_pickradius>` float \n :meth:`rasterized <matplotlib.artist.Artist.set_rasterized>` bool \n :meth:`sizes <matplotlib.collections._CollectionWithSizes.set_sizes>` ndarray or None \n :meth:`sketch_params <matplotlib.artist.Artist.set_sketch_params>` (scale: float, length: float, randomness: float) \n :meth:`snap <matplotlib.artist.Artist.set_snap>` bool or None \n :meth:`transform <matplotlib.artist.Artist.set_transform>` `.Transform` \n :meth:`url <matplotlib.artist.Artist.set_url>` str \n :meth:`urls <matplotlib.collections.Collection.set_urls>` list of str or None \n :meth:`verts <matplotlib.collections.PolyCollection.set_verts>` list of array-like \n :meth:`verts_and_codes <matplotlib.collections.PolyCollection.set_verts_and_codes>` unknown \n :meth:`visible <matplotlib.artist.Artist.set_visible>` bool \n :meth:`zorder <matplotlib.artist.Artist.set_zorder>` float \n ================================================================================================= =====================================================================================================\n\n\nReturns\n-------\n`~matplotlib.quiver.Quiver`\n\nSee Also\n--------\n.Axes.quiverkey : Add a key to a quiver plot.\n"
remove()[source]

Remove the artist from the figure if possible.

The effect will not be visible until the figure is redrawn, e.g., with FigureCanvasBase.draw_idle. Call relim to update the axes limits if desired.

Note: relim will not see collections even if the collection was added to the axes with autolim = True.

Note: there is no support for removing the artist's legend entry.

set(*, UVC=<UNSET>, agg_filter=<UNSET>, alpha=<UNSET>, animated=<UNSET>, antialiased=<UNSET>, array=<UNSET>, capstyle=<UNSET>, clim=<UNSET>, clip_box=<UNSET>, clip_on=<UNSET>, clip_path=<UNSET>, cmap=<UNSET>, color=<UNSET>, edgecolor=<UNSET>, facecolor=<UNSET>, gid=<UNSET>, hatch=<UNSET>, in_layout=<UNSET>, joinstyle=<UNSET>, label=<UNSET>, linestyle=<UNSET>, linewidth=<UNSET>, norm=<UNSET>, offset_transform=<UNSET>, offsets=<UNSET>, path_effects=<UNSET>, paths=<UNSET>, picker=<UNSET>, pickradius=<UNSET>, rasterized=<UNSET>, sizes=<UNSET>, sketch_params=<UNSET>, snap=<UNSET>, transform=<UNSET>, url=<UNSET>, urls=<UNSET>, verts=<UNSET>, verts_and_codes=<UNSET>, visible=<UNSET>, zorder=<UNSET>)[source]

Set multiple properties at once.

Supported properties are

Property

Description

UVC

unknown

agg_filter

a filter function, which takes a (m, n, 3) float array and a dpi value, and returns a (m, n, 3) array

alpha

array-like or scalar or None

animated

bool

antialiased or aa or antialiaseds

bool or list of bools

array

array-like or None

capstyle

CapStyle or {'butt', 'projecting', 'round'}

clim

(vmin: float, vmax: float)

clip_box

Bbox

clip_on

bool

clip_path

Patch or (Path, Transform) or None

cmap

Colormap or str or None

color

color or list of rgba tuples

edgecolor or ec or edgecolors

color or list of colors or 'face'

facecolor or facecolors or fc

color or list of colors

figure

Figure

gid

str

hatch

{'/', '\', '|', '-', '+', 'x', 'o', 'O', '.', '*'}

in_layout

bool

joinstyle

JoinStyle or {'miter', 'round', 'bevel'}

label

object

linestyle or dashes or linestyles or ls

str or tuple or list thereof

linewidth or linewidths or lw

float or list of floats

norm

Normalize or None

offset_transform

Transform

offsets

(N, 2) or (2,) array-like

path_effects

AbstractPathEffect

paths

list of array-like

picker

None or bool or float or callable

pickradius

float

rasterized

bool

sizes

ndarray or None

sketch_params

(scale: float, length: float, randomness: float)

snap

bool or None

transform

Transform

url

str

urls

list of str or None

verts

list of array-like

verts_and_codes

unknown

visible

bool

zorder

float

set_UVC(U, V, C=None)[source]

Examples using matplotlib.quiver.Quiver

© 2012–2021 Matplotlib Development Team. All rights reserved.
Licensed under the Matplotlib License Agreement.
https://matplotlib.org/3.5.1/api/_as_gen/matplotlib.quiver.Quiver.html