W3cubDocs

/Nim

c2nim User's manual

Introduction

"We all make choices. But in the end our choices make us."

c2nim is a tool to translate Ansi C code to Nim. The output is human-readable Nim code that is meant to be tweaked by hand after the translation process. c2nim is no real compiler!

c2nim is preliminary meant to translate C header files. Because of this, the preprocessor is part of the parser. For example:

#define abc 123
#define xyz 789

Is translated into:

const
  abc* = 123
  xyz* = 789

c2nim is meant to translate fragments of C code and thus does not follow include files. c2nim cannot parse all of Ansi C and many constructs cannot be represented in Nim: for example duff's device cannot be translated to Nim.

Preprocessor support

Even though the translation process is not perfect, it is often the case that the translated Nim code does not need any tweaking by hand. In other cases it may be preferable to modify the input file instead of the generated Nim code so that c2nim can parse it properly. c2nim's preprocessor defines the symbol C2NIM that can be used to mark code sections:

#ifndef C2NIM
  // C2NIM should ignore this prototype:
  int fprintf(FILE* f, const char* frmt, ...);
#endif

The C2NIM symbol is only recognized in #ifdef and #ifndef constructs! #if defined(C2NIM) does not work.

c2nim processes #ifdef C2NIM and #ifndef C2NIM directives, but other #if[def] directives are translated into Nim's when construct:

#ifdef DEBUG
#  define OUT(x) printf("%s\n", x)
#else
#  define OUT(x)
#endif

Is translated into:

when defined(debug):
  template OUT*(x: expr): expr =
    printf("%s\x0A", x)
else:
  template OUT*(x: expr): stmt =
    discard

As can be seen from the example, C's macros with parameters are mapped to Nim's templates. This mapping is the best one can do, but it is of course not accurate: Nim's templates operate on syntax trees whereas C's macros work on the token level. c2nim cannot translate any macro that contains the ## token concatenation operator.

c2nim's preprocessor supports special directives that affect how the output is generated. They should be put into a #ifdef C2NIM section so that ordinary C compilers ignore them.

#skipinclude directive

Note: There is also a --skipinclude command line option that can be used for the same purpose.

By default, c2nim translates an #include that is not followed by < (like in #include <stdlib>) to a Nim import statement. This directive tells c2nim to just skip any #include.

#stdcall and #cdecl directives

Note: There are also --stdcall and --cdecl command line options that can be used for the same purpose.

These directives tell c2nim that it should annotate every proc (or proc type) with the stdcall / cdecl calling convention.

#dynlib directive

Note: There is also a --dynlib command line option that can be used for the same purpose.

This directive tells c2nim that it should annotate every proc that resulted from a C function prototype with the dynlib pragma:

#ifdef C2NIM
#  dynlib iupdll
#  cdecl
#  if defined(windows)
#    define iupdll "iup.dll"
#  elif defined(macosx)
#    define iupdll "libiup.dylib"
#  else
#    define iupdll "libiup.so"
#  endif
#endif

int IupConvertXYToPos(PIhandle ih, int x, int y);

Is translated to:

when defined(windows):
  const iupdll* = "iup.dll"
elif defined(macosx):
  const iupdll* = "libiup.dylib"
else:
  const iupdll* = "libiup.so"

proc IupConvertXYToPos*(ih: PIhandle, x: cint, y: cint): cint {.
  importc: "IupConvertXYToPos", cdecl, dynlib: iupdll.}

Note how the example contains extra C code to declare the iupdll symbol in the generated Nim code.

#header directive

Note: There is also a --header command line option that can be used for the same purpose.

The #header directive tells c2nim that it should annotate every proc that resulted from a C function prototype and every exported variable and type with the header pragma:

#ifdef C2NIM
#  header "iup.h"
#endif

int IupConvertXYToPos(PIhandle ih, int x, int y);

Is translated to:

proc IupConvertXYToPos*(ih: PIhandle, x: cint, y: cint): cint {.
  importc: "IupConvertXYToPos", header: "iup.h".}

The #header and the #dynlib directives are mutually exclusive. A binding that uses dynlib is much more preferable over one that uses header! The Nim compiler might drop support for the header pragma in the future as it cannot work for backends that do not generate C code.

#prefix and #suffix directives

Note: There are also --prefix and --suffix command line options that can be used for the same purpose.

c2nim does not do any name mangling by default. However the #prefix and #suffix directives can be used to strip prefixes and suffixes from the identifiers in the C code:

#ifdef C2NIM
#  prefix Iup
#  dynlib dllname
#  cdecl
#endif

int IupConvertXYToPos(PIhandle ih, int x, int y);

Is translated to:

proc ConvertXYToPos*(ih: PIhandle, x: cint, y: cint): cint {.
  importc: "IupConvertXYToPos", cdecl, dynlib: dllname.}

#mangle directive

Even more sophisticated name mangling can be achieved by the #mangle directive: It takes a PEG pattern and format string that specify how the identifier should be converted:

#mangle "'GTK_'{.*}" "TGtk$1"

For convenience the PEG pattern and the replacement can be single identifiers too, there is no need to quote them:

#mangle ssize_t  int
// is short for:
#mangle "'ssize_t'" "int"

#assumedef and #assumendef directives

Note: There are also --assumedef and --assumendef command line options that can be used for the same purpose.

c2nim can be configured to skip certain #ifdef or #ifndef sections. If a directive #assumedef SYMBOL``is found, c2nim will assume that the symbol ``SYMBOL is defined, and thus skip #ifndef SYMBOL sections. The same happens if SYMBOL is actually defined with a #def directive.

Viceversa, one can also use #assumendef SYMBOL to declare that SYMBOL should be considered not defined, and hence skip #ifdef SYMBOL sections.

These features also work for declarations like #if defined(SYMBOL) and boolean combinations of such declarations.

For instance, the following directive

#assumedef NVGRAPH_API

can be used to ignore the whole code block

#ifndef NVGRAPH_API
#ifdef _WIN32
#define NVGRAPH_API __stdcall
#else
#define NVGRAPH_API
#endif
#endif

which may otherwise confuse the c2nim parser.

#private directive

By default c2nim marks every top level identifier (proc name, variable, etc.) as exported (the export marker is * in Nim). With the #private directive identifiers can be marked as private so that the resulting Nim module does not export them. The #private directive takes a PEG pattern:

#private "@('_'!.)" // all identifiers ending in '_' are private

Note: The pattern refers to the original C identifiers, not to the resulting identifiers after mangling!

#skipcomments directive

Note: There is also a --skipcomments command line option that can be used for the same purpose.

The #skipcomments directive can be put into the C code to make c2nim ignore comments and not copy them into the generated Nim file.

#typeprefixes directive

Note: There is also a --typeprefixes command line option that can be used for the same purpose.

The #typeprefixes directive can be put into the C code to make c2nim generate the T or P prefix for every defined type.

#def directive

Often C code contains special macros that affect the declaration of a function prototype but confuse c2nim's parser:

// does not parse!
EXTERN(int) f(void);
EXTERN(int) g(void);

Instead of removing EXTERN() from the input source file (which cannot be done reliably even with a regular expression!), one can tell c2nim that EXTERN is a macro that should be expanded by c2nim too:

#ifdef C2NIM
#  def EXTERN(x) static x
#endif
// parses now!
EXTERN(int) f(void);
EXTERN(int) g(void);

#def is very similar to C's #define, so in general the macro definition can be copied and pasted into a #def directive.

It can also be used when defines are being referred to, as c2nim currently does not expand defines:

#define DEFINE_COMPLEX(R, C) typedef R C[2]

#define DEFINE_API(X, R, C)   \
  DEFINE_COMPLEX(R, C);

DEFINE_API(MANGLE_DOUBLE, double, my_complex);

The above example will fail, to ensure c2nim processes these defines and expands them, use c2nim's #def directive:

#ifdef C2NIM
#  def DEFINE_COMPLEX(R, C) typedef R C[2]
#endif

#ifndef C2NIM
#  define DEFINE_COMPLEX(R, C) typedef R C[2]
#endif

#define DEFINE_API(X, R, C)   \
  DEFINE_COMPLEX(R, C);

DEFINE_API(MANGLE_DOUBLE, double, my_complex);

Note: Ensure the original #define is not seen by c2nim (notice the #ifndef C2NIM).

#pp directive

Instead of keeping 2 versions of define foo around, one #def foo for c2nim and one ordinary #define foo for C/C++, it is often more convenient to tell c2nim that foo is to be interpreted as a #def. This is what the #pp directive accomplishes:

#ifdef C2NIM
#pp DECLARE_NO_COPY_CLASS
#endif

#define DECLARE_NO_COPY_CLASS(classname)      \
  private:                                    \
      classname(const classname&);            \
      classname& operator=(const classname&)

In the example c2nim treats the declaration of DECLARE_NO_COPY_CLASS as if it has been defined via #def.

#discardableprefix directive

Often C and C++ code contains something like the following, where the return value is frequently ignored and so the Nim wrapper should contain a .discardable pragma:

bool AddPoint(Sizer* s, int x, int y);
int SetSize(Widget* w, int w, int h);

This can be accomplished with the #discardableprefix directive. As its name suggests functions of the given prefix(es) that have non-void return type get annotated with .discardable:

#discardableprefix Add
#discardableprefix Set

bool AddPoint(Sizer* s, int x, int y);
int SetSize(Widget* w, int w, int h);

Produces:

proc AddPoint*(s: ptr Sizer; x: cint; y: cint): bool {.discardable.}
proc SetSize*(w: ptr Widget; w: cint; h: cint): cint {.discardable.}

You can use #discardableprefix "" to always add the .discardable pragma since every name starts with the empty string prefix.

Embedding Nim code

Starting with c2nim version 0.9.8 it is also possible to directly embed Nim code in the C file. This is handy when you don't want to modify the generated Nim code at all. Nim code can be embedded directly via #@ Nim code here @#:

#ifdef C2NIM
#@
proc handwrittenNim(): string =
  "@#"
@#
#endif

The closing @# needs to be on a line of its own, only preceeded by optional whitespace. This way @# can otherwise occur in the Nim code as the example shows.

#@ ... @# is syntactically treated as an expression so you can do pretty wild stuff like:

#define foobar #@ 5 or 9
@#

Produces:

const
  foobar* = 5 or 9

Instead of #@ @# Nim's pragma brackets {. .} can also be used, but not nested since the .} doesn't have to be on a line of its own:

#define foobar {. 5 or 9 .}

Limitations

  • C's , operator (comma operator) is not supported.
  • C's union are translated to Nim's objects and only the first field is included in the object type. This way there is a high chance that it is binary compatible to the union.
  • The condition in a do while(condition) statement must be 0.
  • Lots of other small issues...

© 2006–2018 Andreas Rumpf
Licensed under the MIT License.
https://nim-lang.org/docs/c2nim.html