---

Chapter 16 The documentation generator (ocamldoc)

• 16.1 Usage
• 16.2 Syntax of documentation comments
• 16.3 Custom generators
• 16.4 Adding command line options

This chapter describes OCamldoc, a tool that generates documentation from special comments embedded in source files. The comments used by OCamldoc are of the form (**…*) and follow the format described in section 16.2.

OCamldoc can produce documentation in various formats: HTML, L^AT_EX, TeXinfo, Unix man pages, and dot dependency graphs. Moreover, users can add their own custom generators, as explained in section 16.3.

In this chapter, we use the word element to refer to any of the following parts of an OCaml source file: a type declaration, a value, a module, an exception, a module type, a type constructor, a record field, a class, a class type, a class method, a class value or a class inheritance clause.

16.1 Usage

16.1.1 Invocation

OCamldoc is invoked via the command ocamldoc, as follows:

        ocamldoc options sourcefiles

Options for choosing the output format

The following options determine the format for the generated documentation.

-html

Generate documentation in HTML default format. The generated HTML pages are stored in the current directory, or in the directory specified with the -d option. You can customize the style of the generated pages by editing the generated style.css file, or by providing your own style sheet using option -css-style. The file style.css is not generated if it already exists or if -css-style is used.

-latex

Generate documentation in L^AT_EX default format. The generated L^AT_EX document is saved in file ocamldoc.out, or in the file specified with the -o option. The document uses the style file ocamldoc.sty. This file is generated when using the -latex option, if it does not already exist. You can change this file to customize the style of your L^AT_EX documentation.

-texi

Generate documentation in TeXinfo default format. The generated L^AT_EX document is saved in file ocamldoc.out, or in the file specified with the -o option.

-man

Generate documentation as a set of Unix man pages. The generated pages are stored in the current directory, or in the directory specified with the -d option.

-dot

Generate a dependency graph for the toplevel modules, in a format suitable for displaying and processing by dot. The dot tool is available from https://graphviz.org/. The textual representation of the graph is written to the file ocamldoc.out, or to the file specified with the -o option. Use dot ocamldoc.out to display it.

-g file.cm[o,a,xs]

Dynamically load the given file, which defines a custom documentation generator. See section 16.4.1. This option is supported by the ocamldoc command (to load .cmo and .cma files) and by its native-code version ocamldoc.opt (to load .cmxs files). If the given file is a simple one and does not exist in the current directory, then ocamldoc looks for it in the custom generators default directory, and in the directories specified with optional -i options.

-customdir

Display the custom generators default directory.

-i directory

Add the given directory to the path where to look for custom generators.

General options

-d dir

Generate files in directory dir, rather than the current directory.

-dump file

Dump collected information into file. This information can be read with the -load option in a subsequent invocation of ocamldoc.

-hide modules

Hide the given complete module names in the generated documentation. modules is a list of complete module names separated by ’,’, without blanks. For instance: Stdlib,M2.M3.

-inv-merge-ml-mli

Reverse the precedence of implementations and interfaces when merging. All elements in implementation files are kept, and the -m option indicates which parts of the comments in interface files are merged with the comments in implementation files.

-keep-code

Always keep the source code for values, methods and instance variables, when available.

-load file

Load information from file, which has been produced by ocamldoc -dump. Several -load options can be given.

-m flags

Specify merge options between interfaces and implementations. (see section 16.1.2 for details). flags can be one or several of the following characters:

d

merge description

a

merge @author

v

merge @version

l

merge @see

s

merge @since

b

merge @before

o

merge @deprecated

p

merge @param

e

merge @raise

r

merge @return

A

merge everything

-no-custom-tags

Do not allow custom @-tags (see section 16.2.5).

-no-stop

Keep elements placed after/between the (**/**) special comment(s) (see section 16.2).

-o file

Output the generated documentation to file instead of ocamldoc.out. This option is meaningful only in conjunction with the -latex, -texi, or -dot options.

-pp command

Pipe sources through preprocessor command.

-impl filename

Process the file filename as an implementation file, even if its extension is not .ml.

-intf filename

Process the file filename as an interface file, even if its extension is not .mli.

-text filename

Process the file filename as a text file, even if its extension is not .txt.

-sort

Sort the list of top-level modules before generating the documentation.

-stars

Remove blank characters until the first asterisk (’*’) in each line of comments.

-t title

Use title as the title for the generated documentation.

-intro file

Use content of file as ocamldoc text to use as introduction (HTML, L^AT_EX and TeXinfo only). For HTML, the file is used to create the whole index.html file.

-v

Verbose mode. Display progress information.

-version

Print version string and exit.

-vnum

Print short version number and exit.

-warn-error

Treat Ocamldoc warnings as errors.

-hide-warnings

Do not print OCamldoc warnings.

-help or --help

Display a short usage summary and exit.

Type-checking options

OCamldoc calls the OCaml type-checker to obtain type information. The following options impact the type-checking phase. They have the same meaning as for the ocamlc and ocamlopt commands.

-I directory

Add directory to the list of directories search for compiled interface files (.cmi files).

-nolabels

Ignore non-optional labels in types.

-rectypes

Allow arbitrary recursive types. (See the -rectypes option to ocamlc.)

Options for generating HTML pages

The following options apply in conjunction with the -html option:

-all-params

Display the complete list of parameters for functions and methods.

-charset charset

Add information about character encoding being charset (default is iso-8859-1).

-colorize-code

Colorize the OCaml code enclosed in [ ] and {[ ]}, using colors to emphasize keywords, etc. If the code fragments are not syntactically correct, no color is added.

-css-style filename

Use filename as the Cascading Style Sheet file.

-index-only

Generate only index files.

-short-functors

Use a short form to display functors:

module M : functor (A:Module) -> functor (B:Module2) -> sig .. end

is displayed as:

module M (A:Module) (B:Module2) : sig .. end

Options for generating L^AT_EX files

The following options apply in conjunction with the -latex option:

-latex-value-prefix prefix

Give a prefix to use for the labels of the values in the generated L^AT_EX document. The default prefix is the empty string. You can also use the options -latex-type-prefix, -latex-exception-prefix, -latex-module-prefix, -latex-module-type-prefix, -latex-class-prefix, -latex-class-type-prefix, -latex-attribute-prefix and -latex-method-prefix.

These options are useful when you have, for example, a type and a value with the same name. If you do not specify prefixes, L^AT_EX will complain about multiply defined labels.

-latextitle n,style

Associate style number n to the given L^AT_EX sectioning command style, e.g. section or subsection. (L^AT_EX only.) This is useful when including the generated document in another L^AT_EX document, at a given sectioning level. The default association is 1 for section, 2 for subsection, 3 for subsubsection, 4 for paragraph and 5 for subparagraph.

-noheader

Suppress header in generated documentation.

-notoc

Do not generate a table of contents.

-notrailer

Suppress trailer in generated documentation.

-sepfiles

Generate one .tex file per toplevel module, instead of the global ocamldoc.out file.

Options for generating TeXinfo files

The following options apply in conjunction with the -texi option:

-esc8

Escape accented characters in Info files.

-info-entry

Specify Info directory entry.

-info-section

Specify section of Info directory.

-noheader

Suppress header in generated documentation.

-noindex

Do not build index for Info files.

-notrailer

Suppress trailer in generated documentation.

Options for generating dot graphs

The following options apply in conjunction with the -dot option:

-dot-colors colors

Specify the colors to use in the generated dot code. When generating module dependencies, ocamldoc uses different colors for modules, depending on the directories in which they reside. When generating types dependencies, ocamldoc uses different colors for types, depending on the modules in which they are defined. colors is a list of color names separated by ’,’, as in Red,Blue,Green. The available colors are the ones supported by the dot tool.

-dot-include-all

Include all modules in the dot output, not only modules given on the command line or loaded with the -load option.

-dot-reduce

Perform a transitive reduction of the dependency graph before outputting the dot code. This can be useful if there are a lot of transitive dependencies that clutter the graph.

-dot-types

Output dot code describing the type dependency graph instead of the module dependency graph.

Options for generating man files

The following options apply in conjunction with the -man option:

-man-mini

Generate man pages only for modules, module types, classes and class types, instead of pages for all elements.

-man-suffix suffix

Set the suffix used for generated man filenames. Default is ’3o’, as in List.3o.

-man-section section

Set the section number used for generated man filenames. Default is ’3’.

16.1.2 Merging of module information

Information on a module can be extracted either from the .mli or .ml file, or both, depending on the files given on the command line. When both .mli and .ml files are given for the same module, information extracted from these files is merged according to the following rules:

• Only elements (values, types, classes, ...) declared in the .mli file are kept. In other terms, definitions from the .ml file that are not exported in the .mli file are not documented.
• Descriptions of elements and descriptions in @-tags are handled as follows. If a description for the same element or in the same @-tag of the same element is present in both files, then the description of the .ml file is concatenated to the one in the .mli file, if the corresponding -m flag is given on the command line. If a description is present in the .ml file and not in the .mli file, the .ml description is kept. In either case, all the information given in the .mli file is kept.

16.1.3 Coding rules

The following rules must be respected in order to avoid name clashes resulting in cross-reference errors:

• In a module, there must not be two modules, two module types or a module and a module type with the same name. In the default HTML generator, modules ab and AB will be printed to the same file on case insensitive file systems.
• In a module, there must not be two classes, two class types or a class and a class type with the same name.
• In a module, there must not be two values, two types, or two exceptions with the same name.
• Values defined in tuple, as in let (x,y,z) = (1,2,3) are not kept by OCamldoc.
• Avoid the following construction:

     open Foo (* which has a module Bar with a value x *) module Foo = struct module Bar = struct let x = 1 end end let dummy = Bar.x 

  In this case, OCamldoc will associate Bar.x to the x of module Foo defined just above, instead of to the Bar.x defined in the opened module Foo.

16.2 Syntax of documentation comments

Comments containing documentation material are called special comments and are written between (** and *). Special comments must start exactly with (**. Comments beginning with ( and more than two * are ignored.

16.2.1 Placement of documentation comments

OCamldoc can associate comments to some elements of the language encountered in the source files. The association is made according to the locations of comments with respect to the language elements. The locations of comments in .mli and .ml files are different.

Comments in .mli files

A special comment is associated to an element if it is placed before or after the element.
A special comment before an element is associated to this element if :

• There is no blank line or another special comment between the special comment and the element. However, a regular comment can occur between the special comment and the element.
• The special comment is not already associated to the previous element.
• The special comment is not the first one of a toplevel module.

A special comment after an element is associated to this element if there is no blank line or comment between the special comment and the element.

There are two exceptions: for constructors and record fields in type definitions, the associated comment can only be placed after the constructor or field definition, without blank lines or other comments between them. The special comment for a constructor with another constructor following must be placed before the ’|’ character separating the two constructors.

The following sample interface file foo.mli illustrates the placement rules for comments in .mli files.

   (** The first special comment of the file is the comment associated with the whole module.*) (** Special comments can be placed between elements and are kept by the OCamldoc tool, but are not associated to any element. @-tags in these comments are ignored.*) (*******************************************************************) (** Comments like the one above, with more than two asterisks, are ignored. *) (** The comment for function f. *) val f : int -> int -> int (** The continuation of the comment for function f. *) (** Comment for exception My_exception, even with a simple comment between the special comment and the exception.*) (* Hello, I'm a simple comment :-) *) exception My_exception of (int -> int) * int (** Comment for type weather *) type weather = | Rain of int (** The comment for constructor Rain *) | Sun (** The comment for constructor Sun *) (** Comment for type weather2 *) type weather2 = | Rain of int (** The comment for constructor Rain *) | Sun (** The comment for constructor Sun *) (** I can continue the comment for type weather2 here because there is already a comment associated to the last constructor.*) (** The comment for type my_record *) type my_record = { foo : int ; (** Comment for field foo *) bar : string ; (** Comment for field bar *) } (** Continuation of comment for type my_record *) (** Comment for foo *) val foo : string (** This comment is associated to foo and not to bar. *) val bar : string (** This comment is associated to bar. *) (** The comment for class my_class *) class my_class : object (** A comment to describe inheritance from cl *) inherit cl (** The comment for attribute tutu *) val mutable tutu : string (** The comment for attribute toto. *) val toto : int (** This comment is not attached to titi since there is a blank line before titi, but is kept as a comment in the class. *) val titi : string (** Comment for method toto *) method toto : string (** Comment for method m *) method m : float -> int end (** The comment for the class type my_class_type *) class type my_class_type = object (** The comment for variable x. *) val mutable x : int (** The comment for method m. *) method m : int -> int end (** The comment for module Foo *) module Foo : sig (** The comment for x *) val x : int (** A special comment that is kept but not associated to any element *) end (** The comment for module type my_module_type. *) module type my_module_type = sig (** The comment for value x. *) val x : int (** The comment for module M. *) module M : sig (** The comment for value y. *) val y : int (* ... *) end end 

Comments in .ml files

A special comment is associated to an element if it is placed before the element and there is no blank line between the comment and the element. Meanwhile, there can be a simple comment between the special comment and the element. There are two exceptions, for constructors and record fields in type definitions, whose associated comment must be placed after the constructor or field definition, without blank line between them. The special comment for a constructor with another constructor following must be placed before the ’|’ character separating the two constructors.

The following example of file toto.ml shows where to place comments in a .ml file.

   (** The first special comment of the file is the comment associated to the whole module. *) (** The comment for function f *) let f x y = x + y (** This comment is not attached to any element since there is another special comment just before the next element. *) (** Comment for exception My_exception, even with a simple comment between the special comment and the exception.*) (* A simple comment. *) exception My_exception of (int -> int) * int (** Comment for type weather *) type weather = | Rain of int (** The comment for constructor Rain *) | Sun (** The comment for constructor Sun *) (** The comment for type my_record *) type my_record = { foo : int ; (** Comment for field foo *) bar : string ; (** Comment for field bar *) } (** The comment for class my_class *) class my_class = object (** A comment to describe inheritance from cl *) inherit cl (** The comment for the instance variable tutu *) val mutable tutu = "tutu" (** The comment for toto *) val toto = 1 val titi = "titi" (** Comment for method toto *) method toto = tutu ^ "!" (** Comment for method m *) method m (f : float) = 1 end (** The comment for class type my_class_type *) class type my_class_type = object (** The comment for the instance variable x. *) val mutable x : int (** The comment for method m. *) method m : int -> int end (** The comment for module Foo *) module Foo = struct (** The comment for x *) let x = 0 (** A special comment in the class, but not associated to any element. *) end (** The comment for module type my_module_type. *) module type my_module_type = sig (* Comment for value x. *) val x : int (* ... *) end 

16.2.2 The Stop special comment

The special comment (**/**) tells OCamldoc to discard elements placed after this comment, up to the end of the current class, class type, module or module type, or up to the next stop comment. For instance:

   class type foo = object (** comment for method m *) method m : string (**/**) (** This method won't appear in the documentation *) method bar : int end (** This value appears in the documentation, since the Stop special comment in the class does not affect the parent module of the class.*) val foo : string (**/**) (** The value bar does not appear in the documentation.*) val bar : string (**/**) (** The type t appears since in the documentation since the previous stop comment toggled off the "no documentation mode". *) type t = string 

The -no-stop option to ocamldoc causes the Stop special comments to be ignored.

16.2.3 Syntax of documentation comments

The inside of documentation comments (**…*) consists of free-form text with optional formatting annotations, followed by optional tags giving more specific information about parameters, version, authors, … The tags are distinguished by a leading @ character. Thus, a documentation comment has the following shape:

(** The comment begins with a description, which is text formatted
   according to the rules described in the next section.
   The description continues until the first non-escaped '@' character.
   @author Mr Smith
   @param x description for parameter x
*)

Some elements support only a subset of all @-tags. Tags that are not relevant to the documented element are simply ignored. For instance, all tags are ignored when documenting type constructors, record fields, and class inheritance clauses. Similarly, a @param tag on a class instance variable is ignored.

At last, (**) is the empty documentation comment.

16.2.4 Text formatting

Here is the BNF grammar for the simple markup language used to format text descriptions.

∣	{ { 0 … 9 }+ text }	format text as a section header; the integer following { indicates the sectioning level.
∣	{ { 0 … 9 }+ : label text }	same, but also associate the name label to the current point. This point can be referenced by its fully-qualified label in a {! command, just like any other element.
∣	{b text }	set text in bold.
∣	{i text }	set text in italic.
∣	{e text }	emphasize text.
∣	{C text }	center text.
∣	{L text }	left align text.
∣	{R text }	right align text.
∣	{ul list }	build a list.
∣	{ol list }	build an enumerated list.
∣	{{: string } text }	put a link to the given address (given as string) on the given text.
∣	[ string ]	set the given string in source code style.
∣	{[ string ]}	set the given string in preformatted source code style.
∣	{v string v}	set the given string in verbatim style.
∣	{% string %}	target-specific content (LATEX code by default, see details in 16.2.4.4)
∣	{! string }	insert a cross-reference to an element (see section 16.2.4.2 for the syntax of cross-references).
∣	{!modules: string string ... }	insert an index table for the given module names. Used in HTML only.
∣	{!indexlist}	insert a table of links to the various indexes (types, values, modules, ...). Used in HTML only.
∣	{^ text }	set text in superscript.
∣	{_ text }	set text in subscript.
∣	escaped-string	typeset the given string as is; special characters (’{’, ’}’, ’[’, ’]’ and ’@’) must be escaped by a ’\’
∣	blank-line	force a new line.

16.2.4.1 List formatting

A shortcut syntax exists for lists and enumerated lists:

(** Here is a {b list}
- item 1
- item 2
- item 3

The list is ended by the blank line.*)

is equivalent to:

(** Here is a {b list}
{ul {- item 1}
{- item 2}
{- item 3}}
The list is ended by the blank line.*)

The same shortcut is available for enumerated lists, using ’+’ instead of ’-’. Note that only one list can be defined by this shortcut in nested lists.

16.2.4.2 Cross-reference formatting

Cross-references are fully qualified element names, as in the example {!Foo.Bar.t}. This is an ambiguous reference as it may designate a type name, a value name, a class name, etc. It is possible to make explicit the intended syntactic class, using {!type:Foo.Bar.t} to designate a type, and {!val:Foo.Bar.t} a value of the same name.

The list of possible syntactic class is as follows:

In the case of variant constructors or record field, the constructor or field name should be preceded by the name of the correspond type – to avoid the ambiguity of several types having the same constructor names. For example, the constructor Node of the type tree will be referenced as {!tree.Node} or {!const:tree.Node}, or possibly {!Mod1.Mod2.tree.Node} from outside the module.

16.2.4.3 First sentence

In the description of a value, type, exception, module, module type, class or class type, the first sentence is sometimes used in indexes, or when just a part of the description is needed. The first sentence is composed of the first characters of the description, until

• the first dot followed by a blank, or
• the first blank line

outside of the following text formatting : {ul list } , {ol list } , [ string ] , {[ string ]} , {v string v} , {% string %} , {! string } , {^ text } , {_ text } .

16.2.4.4 Target-specific formatting

The content inside {%foo: ... %} is target-specific and will only be interpreted by the backend foo, and ignored by the others. The backends of the distribution are latex, html, texi and man. If no target is specified (syntax {% ... %}), latex is chosen by default. Custom generators may support their own target prefix.

16.2.4.5 Recognized HTML tags

The HTML tags <b>..</b>, <code>..</code>, <i>..</i>, <ul>..</ul>, <ol>..</ol>, <li>..</li>, <center>..</center> and <h[0-9]>..</h[0-9]> can be used instead of, respectively, {b ..} , [..] , {i ..} , {ul ..} , {ol ..} , {li ..} , {C ..} and {[0-9] ..}.

16.2.5 Documentation tags (@-tags)

Predefined tags

The following table gives the list of predefined @-tags, with their syntax and meaning.

@author string	The author of the element. One author per @author tag. There may be several @author tags for the same element.
@deprecated text	The text should describe when the element was deprecated, what to use as a replacement, and possibly the reason for deprecation.
@param id text	Associate the given description (text) to the given parameter name id. This tag is used for functions, methods, classes and functors.
@raise Exc text	Explain that the element may raise the exception Exc.
@return text	Describe the return value and its possible values. This tag is used for functions and methods.
@see < URL > text	Add a reference to the URL with the given text as comment.
@see 'filename' text	Add a reference to the given file name (written between single quotes), with the given text as comment.
@see "document-name" text	Add a reference to the given document name (written between double quotes), with the given text as comment.
@since string	Indicate when the element was introduced.
@before version text	Associate the given description (text) to the given version in order to document compatibility issues.
@version string	The version number for the element.

Custom tags

You can use custom tags in the documentation comments, but they will have no effect if the generator used does not handle them. To use a custom tag, for example foo, just put @foo with some text in your comment, as in:

(** My comment to show you a custom tag.
@foo this is the text argument to the [foo] custom tag.
*)

To handle custom tags, you need to define a custom generator, as explained in section 16.3.2.

16.3 Custom generators

OCamldoc operates in two steps:

1. analysis of the source files;
2. generation of documentation, through a documentation generator, which is an object of class Odoc_args.class_generator.

Users can provide their own documentation generator to be used during step 2 instead of the default generators. All the information retrieved during the analysis step is available through the Odoc_info module, which gives access to all the types and functions representing the elements found in the given modules, with their associated description.

The files you can use to define custom generators are installed in the ocamldoc sub-directory of the OCaml standard library.

16.3.1 The generator modules

The type of a generator module depends on the kind of generated documentation. Here is the list of generator module types, with the name of the generator class in the module :

• for HTML : Odoc_html.Html_generator (class html),
• for L^AT_EX : Odoc_latex.Latex_generator (class latex),
• for TeXinfo : Odoc_texi.Texi_generator (class texi),
• for man pages : Odoc_man.Man_generator (class man),
• for graphviz (dot) : Odoc_dot.Dot_generator (class dot),
• for other kinds : Odoc_gen.Base (class generator).

That is, to define a new generator, one must implement a module with the expected signature, and with the given generator class, providing the generate method as entry point to make the generator generates documentation for a given list of modules :

        method generate : Odoc_info.Module.t_module list -> unit

This method will be called with the list of analysed and possibly merged Odoc_info.t_module structures.

It is recommended to inherit from the current generator of the same kind as the one you want to define. Doing so, it is possible to load various custom generators to combine improvements brought by each one.

This is done using first class modules (see chapter 8.5).

The easiest way to define a custom generator is the following this example, here extending the current HTML generator. We don’t have to know if this is the original HTML generator defined in ocamldoc or if it has been extended already by a previously loaded custom generator :

module Generator (G : Odoc_html.Html_generator) =
struct
  class html =
    object(self)
      inherit G.html as html
      (* ... *)

      method generate module_list =
        (* ... *)
        ()

      (* ... *)
  end
end;;

let _ = Odoc_args.extend_html_generator (module Generator : Odoc_gen.Html_functor);;

To know which methods to override and/or which methods are available, have a look at the different base implementations, depending on the kind of generator you are extending :

• for HTML : odoc_html.ml,
• for L^AT_EX : odoc_latex.ml,
• for TeXinfo : odoc_texi.ml,
• for man pages : odoc_man.ml,
• for graphviz (dot) : odoc_dot.ml.

16.3.2 Handling custom tags

Making a custom generator handle custom tags (see 16.2.5) is very simple.

For HTML

Here is how to develop a HTML generator handling your custom tags.

The class Odoc_html.Generator.html inherits from the class Odoc_html.info, containing a field tag_functions which is a list pairs composed of a custom tag (e.g. "foo") and a function taking a text and returning HTML code (of type string). To handle a new tag bar, extend the current HTML generator and complete the tag_functions field:

module Generator (G : Odoc_html.Html_generator) =
struct
  class html =
    object(self)
      inherit G.html

      (** Return HTML code for the given text of a bar tag. *)
      method html_of_bar t = (* your code here *)

      initializer
        tag_functions <- ("bar", self#html_of_bar) :: tag_functions
  end
end
let _ = Odoc_args.extend_html_generator (module Generator : Odoc_gen.Html_functor);;

Another method of the class Odoc_html.info will look for the function associated to a custom tag and apply it to the text given to the tag. If no function is associated to a custom tag, then the method prints a warning message on stderr.

For other generators

You can act the same way for other kinds of generators.

16.4 Adding command line options

The command line analysis is performed after loading the module containing the documentation generator, thus allowing command line options to be added to the list of existing ones. Adding an option can be done with the function

        Odoc_args.add_option : string * Arg.spec * string -> unit

Note: Existing command line options can be redefined using this function.

16.4.1 Compilation and usage

Defining a custom generator class in one file

Let custom.ml be the file defining a new generator class. Compilation of custom.ml can be performed by the following command :

        ocamlc -I +ocamldoc -c custom.ml

The file custom.cmo is created and can be used this way :

        ocamldoc -g custom.cmo other-options source-files

Options selecting a built-in generator to ocamldoc, such as -html, have no effect if a custom generator of the same kind is provided using -g. If the kinds do not match, the selected built-in generator is used and the custom one is ignored.

Defining a custom generator class in several files

It is possible to define a generator class in several modules, which are defined in several files file₁.ml[i], file₂.ml[i], ..., file_n.ml[i]. A .cma library file must be created, including all these files.

The following commands create the custom.cma file from files file₁.ml[i], ..., file_n.ml[i] :

ocamlc -I +ocamldoc -c file1.ml[i]
ocamlc -I +ocamldoc -c file2.ml[i]
...
ocamlc -I +ocamldoc -c filen.ml[i]
ocamlc -o custom.cma -a file1.cmo file2.cmo ... filen.cmo

Then, the following command uses custom.cma as custom generator:

        ocamldoc -g custom.cma other-options source-files

---