Class StampedLock
- java.lang.Object
-
- java.util.concurrent.locks.StampedLock
- All Implemented Interfaces:
Serializable
public class StampedLock extends Object implements Serializable
A capability-based lock with three modes for controlling read/write access. The state of a StampedLock consists of a version and mode. Lock acquisition methods return a stamp that represents and controls access with respect to a lock state; "try" versions of these methods may instead return the special value zero to represent failure to acquire access. Lock release and conversion methods require stamps as arguments, and fail if they do not match the state of the lock. The three modes are:
-
Writing. Method
writeLock()
possibly blocks waiting for exclusive access, returning a stamp that can be used in methodunlockWrite(long)
to release the lock. Untimed and timed versions oftryWriteLock
are also provided. When the lock is held in write mode, no read locks may be obtained, and all optimistic read validations will fail. -
Reading. Method
readLock()
possibly blocks waiting for non-exclusive access, returning a stamp that can be used in methodunlockRead(long)
to release the lock. Untimed and timed versions oftryReadLock
are also provided. -
Optimistic Reading. Method
tryOptimisticRead()
returns a non-zero stamp only if the lock is not currently held in write mode. Methodvalidate(long)
returns true if the lock has not been acquired in write mode since obtaining a given stamp. This mode can be thought of as an extremely weak version of a read-lock, that can be broken by a writer at any time. The use of optimistic mode for short read-only code segments often reduces contention and improves throughput. However, its use is inherently fragile. Optimistic read sections should only read fields and hold them in local variables for later use after validation. Fields read while in optimistic mode may be wildly inconsistent, so usage applies only when you are familiar enough with data representations to check consistency and/or repeatedly invoke methodvalidate()
. For example, such steps are typically required when first reading an object or array reference, and then accessing one of its fields, elements or methods.
This class also supports methods that conditionally provide conversions across the three modes. For example, method tryConvertToWriteLock(long)
attempts to "upgrade" a mode, returning a valid write stamp if (1) already in writing mode (2) in reading mode and there are no other readers or (3) in optimistic mode and the lock is available. The forms of these methods are designed to help reduce some of the code bloat that otherwise occurs in retry-based designs.
StampedLocks are designed for use as internal utilities in the development of thread-safe components. Their use relies on knowledge of the internal properties of the data, objects, and methods they are protecting. They are not reentrant, so locked bodies should not call other unknown methods that may try to re-acquire locks (although you may pass a stamp to other methods that can use or convert it). The use of read lock modes relies on the associated code sections being side-effect-free. Unvalidated optimistic read sections cannot call methods that are not known to tolerate potential inconsistencies. Stamps use finite representations, and are not cryptographically secure (i.e., a valid stamp may be guessable). Stamp values may recycle after (no sooner than) one year of continuous operation. A stamp held without use or validation for longer than this period may fail to validate correctly. StampedLocks are serializable, but always deserialize into initial unlocked state, so they are not useful for remote locking.
Like Semaphore
, but unlike most Lock
implementations, StampedLocks have no notion of ownership. Locks acquired in one thread can be released or converted in another.
The scheduling policy of StampedLock does not consistently prefer readers over writers or vice versa. All "try" methods are best-effort and do not necessarily conform to any scheduling or fairness policy. A zero return from any "try" method for acquiring or converting locks does not carry any information about the state of the lock; a subsequent invocation may succeed.
Because it supports coordinated usage across multiple lock modes, this class does not directly implement the Lock
or ReadWriteLock
interfaces. However, a StampedLock may be viewed asReadLock()
, asWriteLock()
, or asReadWriteLock()
in applications requiring only the associated set of functionality.
Sample Usage. The following illustrates some usage idioms in a class that maintains simple two-dimensional points. The sample code illustrates some try/catch conventions even though they are not strictly needed here because no exceptions can occur in their bodies.
class Point { private double x, y; private final StampedLock sl = new StampedLock(); // an exclusively locked method void move(double deltaX, double deltaY) { long stamp = sl.writeLock(); try { x += deltaX; y += deltaY; } finally { sl.unlockWrite(stamp); } } // a read-only method // upgrade from optimistic read to read lock double distanceFromOrigin() { long stamp = sl.tryOptimisticRead(); try { retryHoldingLock: for (;; stamp = sl.readLock()) { if (stamp == 0L) continue retryHoldingLock; // possibly racy reads double currentX = x; double currentY = y; if (!sl.validate(stamp)) continue retryHoldingLock; return Math.hypot(currentX, currentY); } } finally { if (StampedLock.isReadLockStamp(stamp)) sl.unlockRead(stamp); } } // upgrade from optimistic read to write lock void moveIfAtOrigin(double newX, double newY) { long stamp = sl.tryOptimisticRead(); try { retryHoldingLock: for (;; stamp = sl.writeLock()) { if (stamp == 0L) continue retryHoldingLock; // possibly racy reads double currentX = x; double currentY = y; if (!sl.validate(stamp)) continue retryHoldingLock; if (currentX != 0.0 || currentY != 0.0) break; stamp = sl.tryConvertToWriteLock(stamp); if (stamp == 0L) continue retryHoldingLock; // exclusive access x = newX; y = newY; return; } } finally { if (StampedLock.isWriteLockStamp(stamp)) sl.unlockWrite(stamp); } } // Upgrade read lock to write lock void moveIfAtOrigin(double newX, double newY) { long stamp = sl.readLock(); try { while (x == 0.0 && y == 0.0) { long ws = sl.tryConvertToWriteLock(stamp); if (ws != 0L) { stamp = ws; x = newX; y = newY; break; } else { sl.unlockRead(stamp); stamp = sl.writeLock(); } } } finally { sl.unlock(stamp); } } }
- Since:
- 1.8
- See Also:
- Serialized Form
Constructor Summary
Constructor | Description |
---|---|
StampedLock() | Creates a new lock, initially in unlocked state. |
Method Summary
Modifier and Type | Method | Description |
---|---|---|
Lock | asReadLock() | Returns a plain |
ReadWriteLock | asReadWriteLock() | Returns a |
Lock | asWriteLock() | Returns a plain |
int | getReadLockCount() | Queries the number of read locks held for this lock. |
static boolean | isLockStamp(long stamp) | Tells whether a stamp represents holding a lock. |
static boolean | isOptimisticReadStamp(long stamp) | Tells whether a stamp represents a successful optimistic read. |
boolean | isReadLocked() | Returns |
static boolean | isReadLockStamp(long stamp) | Tells whether a stamp represents holding a lock non-exclusively. |
boolean | isWriteLocked() | Returns |
static boolean | isWriteLockStamp(long stamp) | Tells whether a stamp represents holding a lock exclusively. |
long | readLock() | Non-exclusively acquires the lock, blocking if necessary until available. |
long | readLockInterruptibly() | Non-exclusively acquires the lock, blocking if necessary until available or the current thread is interrupted. |
String | toString() | Returns a string identifying this lock, as well as its lock state. |
long | tryConvertToOptimisticRead(long stamp) | If the lock state matches the given stamp then, atomically, if the stamp represents holding a lock, releases it and returns an observation stamp. |
long | tryConvertToReadLock(long stamp) | If the lock state matches the given stamp, atomically performs one of the following actions. |
long | tryConvertToWriteLock(long stamp) | If the lock state matches the given stamp, atomically performs one of the following actions. |
long | tryOptimisticRead() | Returns a stamp that can later be validated, or zero if exclusively locked. |
long | tryReadLock() | Non-exclusively acquires the lock if it is immediately available. |
long | tryReadLock(long time,
TimeUnit unit) | Non-exclusively acquires the lock if it is available within the given time and the current thread has not been interrupted. |
boolean | tryUnlockRead() | Releases one hold of the read lock if it is held, without requiring a stamp value. |
boolean | tryUnlockWrite() | Releases the write lock if it is held, without requiring a stamp value. |
long | tryWriteLock() | Exclusively acquires the lock if it is immediately available. |
long | tryWriteLock(long time,
TimeUnit unit) | Exclusively acquires the lock if it is available within the given time and the current thread has not been interrupted. |
void | unlock(long stamp) | If the lock state matches the given stamp, releases the corresponding mode of the lock. |
void | unlockRead(long stamp) | If the lock state matches the given stamp, releases the non-exclusive lock. |
void | unlockWrite(long stamp) | If the lock state matches the given stamp, releases the exclusive lock. |
boolean | validate(long stamp) | Returns true if the lock has not been exclusively acquired since issuance of the given stamp. |
long | writeLock() | Exclusively acquires the lock, blocking if necessary until available. |
long | writeLockInterruptibly() | Exclusively acquires the lock, blocking if necessary until available or the current thread is interrupted. |
Methods declared in class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait
Constructor Detail
StampedLock
public StampedLock()
Creates a new lock, initially in unlocked state.
Method Detail
writeLock
public long writeLock()
Exclusively acquires the lock, blocking if necessary until available.
- Returns:
- a write stamp that can be used to unlock or convert mode
tryWriteLock
public long tryWriteLock()
Exclusively acquires the lock if it is immediately available.
- Returns:
- a write stamp that can be used to unlock or convert mode, or zero if the lock is not available
tryWriteLock
public long tryWriteLock(long time, TimeUnit unit) throws InterruptedException
Exclusively acquires the lock if it is available within the given time and the current thread has not been interrupted. Behavior under timeout and interruption matches that specified for method Lock.tryLock(long,TimeUnit)
.
- Parameters:
-
time
- the maximum time to wait for the lock -
unit
- the time unit of thetime
argument - Returns:
- a write stamp that can be used to unlock or convert mode, or zero if the lock is not available
- Throws:
-
InterruptedException
- if the current thread is interrupted before acquiring the lock
writeLockInterruptibly
public long writeLockInterruptibly() throws InterruptedException
Exclusively acquires the lock, blocking if necessary until available or the current thread is interrupted. Behavior under interruption matches that specified for method Lock.lockInterruptibly()
.
- Returns:
- a write stamp that can be used to unlock or convert mode
- Throws:
-
InterruptedException
- if the current thread is interrupted before acquiring the lock
readLock
public long readLock()
Non-exclusively acquires the lock, blocking if necessary until available.
- Returns:
- a read stamp that can be used to unlock or convert mode
tryReadLock
public long tryReadLock()
Non-exclusively acquires the lock if it is immediately available.
- Returns:
- a read stamp that can be used to unlock or convert mode, or zero if the lock is not available
tryReadLock
public long tryReadLock(long time, TimeUnit unit) throws InterruptedException
Non-exclusively acquires the lock if it is available within the given time and the current thread has not been interrupted. Behavior under timeout and interruption matches that specified for method Lock.tryLock(long,TimeUnit)
.
- Parameters:
-
time
- the maximum time to wait for the lock -
unit
- the time unit of thetime
argument - Returns:
- a read stamp that can be used to unlock or convert mode, or zero if the lock is not available
- Throws:
-
InterruptedException
- if the current thread is interrupted before acquiring the lock
readLockInterruptibly
public long readLockInterruptibly() throws InterruptedException
Non-exclusively acquires the lock, blocking if necessary until available or the current thread is interrupted. Behavior under interruption matches that specified for method Lock.lockInterruptibly()
.
- Returns:
- a read stamp that can be used to unlock or convert mode
- Throws:
-
InterruptedException
- if the current thread is interrupted before acquiring the lock
tryOptimisticRead
public long tryOptimisticRead()
Returns a stamp that can later be validated, or zero if exclusively locked.
- Returns:
- a valid optimistic read stamp, or zero if exclusively locked
validate
public boolean validate(long stamp)
Returns true if the lock has not been exclusively acquired since issuance of the given stamp. Always returns false if the stamp is zero. Always returns true if the stamp represents a currently held lock. Invoking this method with a value not obtained from tryOptimisticRead()
or a locking method for this lock has no defined effect or result.
- Parameters:
-
stamp
- a stamp - Returns:
-
true
if the lock has not been exclusively acquired since issuance of the given stamp; else false
unlockWrite
public void unlockWrite(long stamp)
If the lock state matches the given stamp, releases the exclusive lock.
- Parameters:
-
stamp
- a stamp returned by a write-lock operation - Throws:
-
IllegalMonitorStateException
- if the stamp does not match the current state of this lock
unlockRead
public void unlockRead(long stamp)
If the lock state matches the given stamp, releases the non-exclusive lock.
- Parameters:
-
stamp
- a stamp returned by a read-lock operation - Throws:
-
IllegalMonitorStateException
- if the stamp does not match the current state of this lock
unlock
public void unlock(long stamp)
If the lock state matches the given stamp, releases the corresponding mode of the lock.
- Parameters:
-
stamp
- a stamp returned by a lock operation - Throws:
-
IllegalMonitorStateException
- if the stamp does not match the current state of this lock
tryConvertToWriteLock
public long tryConvertToWriteLock(long stamp)
If the lock state matches the given stamp, atomically performs one of the following actions. If the stamp represents holding a write lock, returns it. Or, if a read lock, if the write lock is available, releases the read lock and returns a write stamp. Or, if an optimistic read, returns a write stamp only if immediately available. This method returns zero in all other cases.
- Parameters:
-
stamp
- a stamp - Returns:
- a valid write stamp, or zero on failure
tryConvertToReadLock
public long tryConvertToReadLock(long stamp)
If the lock state matches the given stamp, atomically performs one of the following actions. If the stamp represents holding a write lock, releases it and obtains a read lock. Or, if a read lock, returns it. Or, if an optimistic read, acquires a read lock and returns a read stamp only if immediately available. This method returns zero in all other cases.
- Parameters:
-
stamp
- a stamp - Returns:
- a valid read stamp, or zero on failure
tryConvertToOptimisticRead
public long tryConvertToOptimisticRead(long stamp)
If the lock state matches the given stamp then, atomically, if the stamp represents holding a lock, releases it and returns an observation stamp. Or, if an optimistic read, returns it if validated. This method returns zero in all other cases, and so may be useful as a form of "tryUnlock".
- Parameters:
-
stamp
- a stamp - Returns:
- a valid optimistic read stamp, or zero on failure
tryUnlockWrite
public boolean tryUnlockWrite()
Releases the write lock if it is held, without requiring a stamp value. This method may be useful for recovery after errors.
- Returns:
-
true
if the lock was held, else false
tryUnlockRead
public boolean tryUnlockRead()
Releases one hold of the read lock if it is held, without requiring a stamp value. This method may be useful for recovery after errors.
- Returns:
-
true
if the read lock was held, else false
isWriteLocked
public boolean isWriteLocked()
Returns true
if the lock is currently held exclusively.
- Returns:
-
true
if the lock is currently held exclusively
isReadLocked
public boolean isReadLocked()
Returns true
if the lock is currently held non-exclusively.
- Returns:
-
true
if the lock is currently held non-exclusively
isWriteLockStamp
public static boolean isWriteLockStamp(long stamp)
Tells whether a stamp represents holding a lock exclusively. This method may be useful in conjunction with tryConvertToWriteLock(long)
, for example:
long stamp = sl.tryOptimisticRead(); try { ... stamp = sl.tryConvertToWriteLock(stamp); ... } finally { if (StampedLock.isWriteLockStamp(stamp)) sl.unlockWrite(stamp); }
- Parameters:
-
stamp
- a stamp returned by a previous StampedLock operation - Returns:
-
true
if the stamp was returned by a successful write-lock operation - Since:
- 10
isReadLockStamp
public static boolean isReadLockStamp(long stamp)
Tells whether a stamp represents holding a lock non-exclusively. This method may be useful in conjunction with tryConvertToReadLock(long)
, for example:
long stamp = sl.tryOptimisticRead(); try { ... stamp = sl.tryConvertToReadLock(stamp); ... } finally { if (StampedLock.isReadLockStamp(stamp)) sl.unlockRead(stamp); }
- Parameters:
-
stamp
- a stamp returned by a previous StampedLock operation - Returns:
-
true
if the stamp was returned by a successful read-lock operation - Since:
- 10
isLockStamp
public static boolean isLockStamp(long stamp)
Tells whether a stamp represents holding a lock. This method may be useful in conjunction with tryConvertToReadLock(long)
and tryConvertToWriteLock(long)
, for example:
long stamp = sl.tryOptimisticRead(); try { ... stamp = sl.tryConvertToReadLock(stamp); ... stamp = sl.tryConvertToWriteLock(stamp); ... } finally { if (StampedLock.isLockStamp(stamp)) sl.unlock(stamp); }
- Parameters:
-
stamp
- a stamp returned by a previous StampedLock operation - Returns:
-
true
if the stamp was returned by a successful read-lock or write-lock operation - Since:
- 10
isOptimisticReadStamp
public static boolean isOptimisticReadStamp(long stamp)
Tells whether a stamp represents a successful optimistic read.
- Parameters:
-
stamp
- a stamp returned by a previous StampedLock operation - Returns:
-
true
if the stamp was returned by a successful optimistic read operation, that is, a non-zero return fromtryOptimisticRead()
ortryConvertToOptimisticRead(long)
- Since:
- 10
getReadLockCount
public int getReadLockCount()
Queries the number of read locks held for this lock. This method is designed for use in monitoring system state, not for synchronization control.
- Returns:
- the number of read locks held
toString
public String toString()
Returns a string identifying this lock, as well as its lock state. The state, in brackets, includes the String
"Unlocked"
or the String "Write-locked"
or the String "Read-locks:"
followed by the current number of read-locks held.
- Overrides:
-
toString
in classObject
- Returns:
- a string identifying this lock, as well as its lock state
asReadLock
public Lock asReadLock()
Returns a plain Lock
view of this StampedLock in which the Lock.lock()
method is mapped to readLock()
, and similarly for other methods. The returned Lock does not support a Condition
; method Lock.newCondition()
throws UnsupportedOperationException
.
- Returns:
- the lock
asWriteLock
public Lock asWriteLock()
Returns a plain Lock
view of this StampedLock in which the Lock.lock()
method is mapped to writeLock()
, and similarly for other methods. The returned Lock does not support a Condition
; method Lock.newCondition()
throws UnsupportedOperationException
.
- Returns:
- the lock
asReadWriteLock
public ReadWriteLock asReadWriteLock()
Returns a ReadWriteLock
view of this StampedLock in which the ReadWriteLock.readLock()
method is mapped to asReadLock()
, and ReadWriteLock.writeLock()
to asWriteLock()
.
- Returns:
- the lock