Class SysexMessage
- java.lang.Object
-
- javax.sound.midi.MidiMessage
-
- javax.sound.midi.SysexMessage
- All Implemented Interfaces:
Cloneable
public class SysexMessage extends MidiMessage
A SysexMessage
object represents a MIDI system exclusive message.
When a system exclusive message is read from a MIDI file, it always has a defined length. Data from a system exclusive message from a MIDI file should be stored in the data array of a SysexMessage
as follows: the system exclusive message status byte (0xF0 or 0xF7), all message data bytes, and finally the end-of-exclusive flag (0xF7). The length reported by the SysexMessage
object is therefore the length of the system exclusive data plus two: one byte for the status byte and one for the end-of-exclusive flag.
As dictated by the Standard MIDI Files specification, two status byte values are legal for a SysexMessage
read from a MIDI file:
- 0xF0: System Exclusive message (same as in MIDI wire protocol)
- 0xF7: Special System Exclusive message
SysexMessages
. In this case, the length of the system exclusive data is not known in advance; the end of the system exclusive data is marked by an end-of-exclusive flag (0xF7) in the MIDI wire byte stream. - 0xF0: System Exclusive message (same as in MIDI wire protocol)
- 0xF7: End of Exclusive (EOX)
SysexMessage
object containing data for a particular system exclusive message should have the status value 0xF0. If this message contains all the system exclusive data for the message, it should end with the status byte 0xF7 (EOX). Otherwise, additional system exclusive data should be sent in one or more SysexMessages
with a status value of 0xF7. The SysexMessage
containing the last of the data for the system exclusive message should end with the value 0xF7 (EOX) to mark the end of the system exclusive message. If system exclusive data from SysexMessages
objects is being transmitted using MIDI wire protocol, only the initial 0xF0 status byte, the system exclusive data itself, and the final 0xF7 (EOX) byte should be propagated; any 0xF7 status bytes used to indicate that a SysexMessage
contains continuing system exclusive data should not be propagated via MIDI wire protocol.
Field Summary
Modifier and Type | Field | Description |
---|---|---|
static int | SPECIAL_SYSTEM_EXCLUSIVE | Status byte for Special System Exclusive message (0xF7, or 247), which is used in MIDI files. |
static int | SYSTEM_EXCLUSIVE | Status byte for System Exclusive message (0xF0, or 240). |
Fields declared in class javax.sound.midi.MidiMessage
data, length
Constructor Summary
Modifier | Constructor | Description |
---|---|---|
SysexMessage() | Constructs a new | |
protected | SysexMessage(byte[] data) | Constructs a new |
SysexMessage(byte[] data,
int length) | Constructs a new | |
SysexMessage(int status,
byte[] data,
int length) | Constructs a new |
Method Summary
Modifier and Type | Method | Description |
---|---|---|
Object | clone() | Creates a new object of the same class and with the same contents as this object. |
byte[] | getData() | Obtains a copy of the data for the system exclusive message. |
void | setMessage(byte[] data,
int length) | Sets the data for the system exclusive message. |
void | setMessage(int status,
byte[] data,
int length) | Sets the data for the system exclusive message. |
Methods declared in class javax.sound.midi.MidiMessage
getLength, getMessage, getStatus
Methods declared in class java.lang.Object
equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
Field Detail
SYSTEM_EXCLUSIVE
public static final int SYSTEM_EXCLUSIVE
Status byte for System Exclusive message (0xF0, or 240).
- See Also:
-
MidiMessage.getStatus()
, Constant Field Values
SPECIAL_SYSTEM_EXCLUSIVE
public static final int SPECIAL_SYSTEM_EXCLUSIVE
Status byte for Special System Exclusive message (0xF7, or 247), which is used in MIDI files. It has the same value as END_OF_EXCLUSIVE, which is used in the real-time "MIDI wire" protocol.
- See Also:
-
MidiMessage.getStatus()
, Constant Field Values
Constructor Detail
SysexMessage
public SysexMessage()
Constructs a new SysexMessage
. The contents of the new message are guaranteed to specify a valid MIDI message. Subsequently, you may set the contents of the message using one of the setMessage
methods.
- See Also:
setMessage(byte[], int)
SysexMessage
public SysexMessage(byte[] data, int length) throws InvalidMidiDataException
Constructs a new SysexMessage
and sets the data for the message. The first byte of the data array must be a valid system exclusive status byte (0xF0 or 0xF7). The contents of the message can be changed by using one of the setMessage
methods.
- Parameters:
-
data
- the system exclusive message data including the status byte -
length
- the length of the valid message data in the array, including the status byte; it should be non-negative and less than or equal todata.length
- Throws:
-
InvalidMidiDataException
- if the parameter values do not specify a valid MIDI meta message - Since:
- 1.7
- See Also:
-
setMessage(byte[], int)
,setMessage(int, byte[], int)
,getData()
SysexMessage
public SysexMessage(int status, byte[] data, int length) throws InvalidMidiDataException
Constructs a new SysexMessage
and sets the data for the message. The contents of the message can be changed by using one of the setMessage
methods.
- Parameters:
-
status
- the status byte for the message; it must be a valid system exclusive status byte (0xF0 or 0xF7) -
data
- the system exclusive message data (without the status byte) -
length
- the length of the valid message data in the array; it should be non-negative and less than or equal todata.length
- Throws:
-
InvalidMidiDataException
- if the parameter values do not specify a valid MIDI system exclusive message - Since:
- 1.7
- See Also:
-
setMessage(byte[], int)
,setMessage(int, byte[], int)
,getData()
SysexMessage
protected SysexMessage(byte[] data)
Constructs a new SysexMessage
.
- Parameters:
-
data
- an array of bytes containing the complete message. The message data may be changed using thesetMessage
method. - See Also:
setMessage(byte[], int)
Method Detail
setMessage
public void setMessage(byte[] data, int length) throws InvalidMidiDataException
Sets the data for the system exclusive message. The first byte of the data array must be a valid system exclusive status byte (0xF0 or 0xF7).
- Overrides:
-
setMessage
in classMidiMessage
- Parameters:
-
data
- the system exclusive message data -
length
- the length of the valid message data in the array, including the status byte - Throws:
-
InvalidMidiDataException
- if the parameter values do not specify a valid MIDI system exclusive message
setMessage
public void setMessage(int status, byte[] data, int length) throws InvalidMidiDataException
Sets the data for the system exclusive message.
- Parameters:
-
status
- the status byte for the message (0xF0 or 0xF7) -
data
- the system exclusive message data -
length
- the length of the valid message data in the array - Throws:
-
InvalidMidiDataException
- if the status byte is invalid for a system exclusive message
getData
public byte[] getData()
Obtains a copy of the data for the system exclusive message. The returned array of bytes does not include the status byte.
- Returns:
- array containing the system exclusive message data
clone
public Object clone()
Creates a new object of the same class and with the same contents as this object.
- Specified by:
-
clone
in classMidiMessage
- Returns:
- a clone of this instance
- See Also:
Cloneable