T
- The type of element returned by the iteratorAutoCloseable
, Closeable
, DirectoryStream<T>
, Iterable<T>
public interface SecureDirectoryStream<T> extends DirectoryStream<T>
DirectoryStream
that defines operations on files that are located relative to an open directory. A SecureDirectoryStream
is intended for use by sophisticated or security sensitive applications requiring to traverse file trees or otherwise operate on directories in a race-free manner. Race conditions can arise when a sequence of file operations cannot be carried out in isolation. Each of the file operations defined by this interface specify a relative path. All access to the file is relative to the open directory irrespective of if the directory is moved or replaced by an attacker while the directory is open. A SecureDirectoryStream
may also be used as a virtual working directory. A SecureDirectoryStream
requires corresponding support from the underlying operating system. Where an implementation supports this features then the DirectoryStream
returned by the newDirectoryStream
method will be a SecureDirectoryStream
and must be cast to that type in order to invoke the methods defined by this interface.
In the case of the default provider
, and a security manager is set, then the permission checks are performed using the path obtained by resolving the given relative path against the original path of the directory (irrespective of if the directory is moved since it was opened).
DirectoryStream.Filter<T>
Modifier and Type | Method | Description |
---|---|---|
void |
deleteDirectory |
Deletes a directory. |
void |
deleteFile |
Deletes a file. |
<V extends FileAttributeView> |
getFileAttributeView |
Returns a new file attribute view to access the file attributes of this directory. |
<V extends FileAttributeView> |
getFileAttributeView |
Returns a new file attribute view to access the file attributes of a file in this directory. |
void |
move |
Move a file from this directory to another directory. |
SeekableByteChannel |
newByteChannel |
Opens or creates a file in this directory, returning a seekable byte channel to access the file. |
SecureDirectoryStream |
newDirectoryStream |
Opens the directory identified by the given path, returning a
SecureDirectoryStream to iterate over the entries in the directory. |
iterator
forEach, spliterator
SecureDirectoryStream<T> newDirectoryStream(T path, LinkOption... options) throws IOException
SecureDirectoryStream
to iterate over the entries in the directory. This method works in exactly the manner specified by the newDirectoryStream
method for the case that the path
parameter is an absolute
path. When the parameter is a relative path then the directory to open is relative to this open directory. The NOFOLLOW_LINKS
option may be used to ensure that this method fails if the file is a symbolic link.
The new directory stream, once created, is not dependent upon the directory stream used to create it. Closing this directory stream has no effect upon newly created directory stream.
path
- the path to the directory to openoptions
- options indicating how symbolic links are handledSecureDirectoryStream
objectClosedDirectoryStreamException
- if the directory stream is closedNotDirectoryException
- if the file could not otherwise be opened because it is not a directory (optional specific exception)
IOException
- if an I/O error occursSecurityException
- In the case of the default provider, and a security manager is installed, the checkRead
method is invoked to check read access to the directory.SeekableByteChannel newByteChannel(T path, Set<? extends OpenOption> options, FileAttribute<?>... attrs) throws IOException
This method works in exactly the manner specified by the Files.newByteChannel
method for the case that the path
parameter is an absolute
path. When the parameter is a relative path then the file to open or create is relative to this open directory. In addition to the options defined by the Files.newByteChannel
method, the NOFOLLOW_LINKS
option may be used to ensure that this method fails if the file is a symbolic link.
The channel, once created, is not dependent upon the directory stream used to create it. Closing this directory stream has no effect upon the channel.
path
- the path of the file to open or createoptions
- options specifying how the file is openedattrs
- an optional list of attributes to set atomically when creating the fileClosedDirectoryStreamException
- if the directory stream is closedIllegalArgumentException
- if the set contains an invalid combination of optionsUnsupportedOperationException
- if an unsupported open option is specified or the array contains attributes that cannot be set atomically when creating the fileFileAlreadyExistsException
- if a file of that name already exists and the CREATE_NEW
option is specified (optional specific exception)
IOException
- if an I/O error occursSecurityException
- In the case of the default provider, and a security manager is installed, the checkRead
method is invoked to check read access to the path if the file is opened for reading. The checkWrite
method is invoked to check write access to the path if the file is opened for writing.void deleteFile(T path) throws IOException
Unlike the delete()
method, this method does not first examine the file to determine if the file is a directory. Whether a directory is deleted by this method is system dependent and therefore not specified. If the file is a symbolic link, then the link itself, not the final target of the link, is deleted. When the parameter is a relative path then the file to delete is relative to this open directory.
path
- the path of the file to deleteClosedDirectoryStreamException
- if the directory stream is closedNoSuchFileException
- if the file does not exist (optional specific exception)
IOException
- if an I/O error occursSecurityException
- In the case of the default provider, and a security manager is installed, the checkDelete
method is invoked to check delete access to the filevoid deleteDirectory(T path) throws IOException
Unlike the delete()
method, this method does not first examine the file to determine if the file is a directory. Whether non-directories are deleted by this method is system dependent and therefore not specified. When the parameter is a relative path then the directory to delete is relative to this open directory.
path
- the path of the directory to deleteClosedDirectoryStreamException
- if the directory stream is closedNoSuchFileException
- if the directory does not exist (optional specific exception)
DirectoryNotEmptyException
- if the directory could not otherwise be deleted because it is not empty (optional specific exception)
IOException
- if an I/O error occursSecurityException
- In the case of the default provider, and a security manager is installed, the checkDelete
method is invoked to check delete access to the directoryvoid move(T srcpath, SecureDirectoryStream<T> targetdir, T targetpath) throws IOException
This method works in a similar manner to move
method when the ATOMIC_MOVE
option is specified. That is, this method moves a file as an atomic file system operation. If the srcpath
parameter is an absolute
path then it locates the source file. If the parameter is a relative path then it is located relative to this open directory. If the targetpath
parameter is absolute then it locates the target file (the targetdir
parameter is ignored). If the parameter is a relative path it is located relative to the open directory identified by the targetdir
parameter. In all cases, if the target file exists then it is implementation specific if it is replaced or this method fails.
srcpath
- the name of the file to movetargetdir
- the destination directorytargetpath
- the name to give the file in the destination directoryClosedDirectoryStreamException
- if this or the target directory stream is closedFileAlreadyExistsException
- if the file already exists in the target directory and cannot be replaced (optional specific exception)
AtomicMoveNotSupportedException
- if the file cannot be moved as an atomic file system operationIOException
- if an I/O error occursSecurityException
- In the case of the default provider, and a security manager is installed, the checkWrite
method is invoked to check write access to both the source and target file.<V extends FileAttributeView> V getFileAttributeView(Class<V> type)
The resulting file attribute view can be used to read or update the attributes of this (open) directory. The type
parameter specifies the type of the attribute view and the method returns an instance of that type if supported. Invoking this method to obtain a BasicFileAttributeView
always returns an instance of that class that is bound to this open directory.
The state of resulting file attribute view is intimately connected to this directory stream. Once the directory stream is closed
, then all methods to read or update attributes will throw ClosedDirectoryStreamException
.
V
- The FileAttributeView
typetype
- the Class
object corresponding to the file attribute viewnull
if the attribute view type is not available<V extends FileAttributeView> V getFileAttributeView(T path, Class<V> type, LinkOption... options)
The resulting file attribute view can be used to read or update the attributes of file in this directory. The type
parameter specifies the type of the attribute view and the method returns an instance of that type if supported. Invoking this method to obtain a BasicFileAttributeView
always returns an instance of that class that is bound to the file in the directory.
The state of resulting file attribute view is intimately connected to this directory stream. Once the directory stream closed
, then all methods to read or update attributes will throw ClosedDirectoryStreamException
. The file is not required to exist at the time that the file attribute view is created but methods to read or update attributes of the file will fail when invoked and the file does not exist.
V
- The FileAttributeView
typepath
- the path of the filetype
- the Class
object corresponding to the file attribute viewoptions
- options indicating how symbolic links are handlednull
if the attribute view type is not available
© 1993, 2023, Oracle and/or its affiliates. All rights reserved.
Documentation extracted from Debian's OpenJDK Development Kit package.
Licensed under the GNU General Public License, version 2, with the Classpath Exception.
Various third party code in OpenJDK is licensed under different licenses (see Debian package).
Java and OpenJDK are trademarks or registered trademarks of Oracle and/or its affiliates.
https://docs.oracle.com/en/java/javase/21/docs/api/java.base/java/nio/file/SecureDirectoryStream.html