W3cubDocs

/OpenJDK 21

Interface XAResource

public interface XAResource
The XAResource interface is a Java mapping of the industry standard XA interface based on the X/Open CAE Specification (Distributed Transaction Processing: The XA Specification).

The XA interface defines the contract between a Resource Manager and a Transaction Manager in a distributed transaction processing (DTP) environment. A JDBC driver or a JMS provider implements this interface to support the association between a global transaction and a database or message service connection.

The XAResource interface can be supported by any transactional resource that is intended to be used by application programs in an environment where transactions are controlled by an external transaction manager. An example of such a resource is a database management system. An application may access data through multiple database connections. Each database connection is enlisted with the transaction manager as a transactional resource. The transaction manager obtains an XAResource for each connection participating in a global transaction. The transaction manager uses the start method to associate the global transaction with the resource, and it uses the end method to disassociate the transaction from the resource. The resource manager is responsible for associating the global transaction to all work performed on its data between the start and end method invocations.

At transaction commit time, the resource managers are informed by the transaction manager to prepare, commit, or rollback a transaction according to the two-phase commit protocol.

Since:
1.4

Field Summary

Modifier and Type Field Description
static final int TMENDRSCAN
Ends a recovery scan.
static final int TMFAIL
Disassociates the caller and marks the transaction branch rollback-only.
static final int TMJOIN
Caller is joining existing transaction branch.
static final int TMNOFLAGS
Use TMNOFLAGS to indicate no flags value is selected.
static final int TMONEPHASE
Caller is using one-phase optimization.
static final int TMRESUME
Caller is resuming association with a suspended transaction branch.
static final int TMSTARTRSCAN
Starts a recovery scan.
static final int TMSUCCESS
Disassociates caller from a transaction branch.
static final int TMSUSPEND
Caller is suspending (not ending) its association with a transaction branch.
static final int XA_OK
The transaction work has been prepared normally.
static final int XA_RDONLY
The transaction branch has been read-only and has been committed.

Method Summary

Modifier and Type Method Description
void commit(Xid xid, boolean onePhase)
Commits the global transaction specified by xid.
void end(Xid xid, int flags)
Ends the work performed on behalf of a transaction branch.
void forget(Xid xid)
Tells the resource manager to forget about a heuristically completed transaction branch.
int getTransactionTimeout()
Obtains the current transaction timeout value set for this XAResource instance.
boolean isSameRM(XAResource xares)
This method is called to determine if the resource manager instance represented by the target object is the same as the resource manager instance represented by the parameter xares.
int prepare(Xid xid)
Ask the resource manager to prepare for a transaction commit of the transaction specified in xid.
Xid[] recover(int flag)
Obtains a list of prepared transaction branches from a resource manager.
void rollback(Xid xid)
Informs the resource manager to roll back work done on behalf of a transaction branch.
boolean setTransactionTimeout(int seconds)
Sets the current transaction timeout value for this XAResource instance.
void start(Xid xid, int flags)
Starts work on behalf of a transaction branch specified in xid.

Field Details

TMENDRSCAN

static final int TMENDRSCAN
Ends a recovery scan.
See Also:

TMFAIL

static final int TMFAIL
Disassociates the caller and marks the transaction branch rollback-only.
See Also:

TMJOIN

static final int TMJOIN
Caller is joining existing transaction branch.
See Also:

TMNOFLAGS

static final int TMNOFLAGS
Use TMNOFLAGS to indicate no flags value is selected.
See Also:

TMONEPHASE

static final int TMONEPHASE
Caller is using one-phase optimization.
See Also:

TMRESUME

static final int TMRESUME
Caller is resuming association with a suspended transaction branch.
See Also:

TMSTARTRSCAN

static final int TMSTARTRSCAN
Starts a recovery scan.
See Also:

TMSUCCESS

static final int TMSUCCESS
Disassociates caller from a transaction branch.
See Also:

TMSUSPEND

static final int TMSUSPEND
Caller is suspending (not ending) its association with a transaction branch.
See Also:

XA_RDONLY

static final int XA_RDONLY
The transaction branch has been read-only and has been committed.
See Also:

XA_OK

static final int XA_OK
The transaction work has been prepared normally.
See Also:

Method Details

commit

void commit(Xid xid, boolean onePhase) throws XAException
Commits the global transaction specified by xid.
Parameters:
xid - A global transaction identifier
onePhase - If true, the resource manager should use a one-phase commit protocol to commit the work done on behalf of xid.
Throws:
XAException - An error has occurred. Possible XAExceptions are XA_HEURHAZ, XA_HEURCOM, XA_HEURRB, XA_HEURMIX, XAER_RMERR, XAER_RMFAIL, XAER_NOTA, XAER_INVAL, or XAER_PROTO.

If the resource manager did not commit the transaction and the paramether onePhase is set to true, the resource manager may throw one of the XA_RB* exceptions. Upon return, the resource manager has rolled back the branch's work and has released all held resources.

end

void end(Xid xid, int flags) throws XAException
Ends the work performed on behalf of a transaction branch. The resource manager disassociates the XA resource from the transaction branch specified and lets the transaction complete.

If TMSUSPEND is specified in the flags, the transaction branch is temporarily suspended in an incomplete state. The transaction context is in a suspended state and must be resumed via the start method with TMRESUME specified.

If TMFAIL is specified, the portion of work has failed. The resource manager may mark the transaction as rollback-only

If TMSUCCESS is specified, the portion of work has completed successfully.

Parameters:
xid - A global transaction identifier that is the same as the identifier used previously in the start method.
flags - One of TMSUCCESS, TMFAIL, or TMSUSPEND.
Throws:
XAException - An error has occurred. Possible XAException values are XAER_RMERR, XAER_RMFAILED, XAER_NOTA, XAER_INVAL, XAER_PROTO, or XA_RB*.

forget

void forget(Xid xid) throws XAException
Tells the resource manager to forget about a heuristically completed transaction branch.
Parameters:
xid - A global transaction identifier.
Throws:
XAException - An error has occurred. Possible exception values are XAER_RMERR, XAER_RMFAIL, XAER_NOTA, XAER_INVAL, or XAER_PROTO.

getTransactionTimeout

int getTransactionTimeout() throws XAException
Obtains the current transaction timeout value set for this XAResource instance. If XAResource.setTransactionTimeout was not used prior to invoking this method, the return value is the default timeout set for the resource manager; otherwise, the value used in the previous setTransactionTimeout call is returned.
Returns:
the transaction timeout value in seconds.
Throws:
XAException - An error has occurred. Possible exception values are XAER_RMERR and XAER_RMFAIL.

isSameRM

boolean isSameRM(XAResource xares) throws XAException
This method is called to determine if the resource manager instance represented by the target object is the same as the resource manager instance represented by the parameter xares.
Parameters:
xares - An XAResource object whose resource manager instance is to be compared with the resource manager instance of the target object.
Returns:
true if it's the same RM instance; otherwise false.
Throws:
XAException - An error has occurred. Possible exception values are XAER_RMERR and XAER_RMFAIL.

prepare

int prepare(Xid xid) throws XAException
Ask the resource manager to prepare for a transaction commit of the transaction specified in xid.
Parameters:
xid - A global transaction identifier.
Returns:
A value indicating the resource manager's vote on the outcome of the transaction. The possible values are: XA_RDONLY or XA_OK. If the resource manager wants to roll back the transaction, it should do so by raising an appropriate XAException in the prepare method.
Throws:
XAException - An error has occurred. Possible exception values are: XA_RB*, XAER_RMERR, XAER_RMFAIL, XAER_NOTA, XAER_INVAL, or XAER_PROTO.

recover

Xid[] recover(int flag) throws XAException
Obtains a list of prepared transaction branches from a resource manager. The transaction manager calls this method during recovery to obtain the list of transaction branches that are currently in prepared or heuristically completed states.
Parameters:
flag - One of TMSTARTRSCAN, TMENDRSCAN, TMNOFLAGS. TMNOFLAGS must be used when no other flags are set in the parameter.
Returns:
The resource manager returns zero or more XIDs of the transaction branches that are currently in a prepared or heuristically completed state. If an error occurs during the operation, the resource manager should throw the appropriate XAException.
Throws:
XAException - An error has occurred. Possible values are XAER_RMERR, XAER_RMFAIL, XAER_INVAL, and XAER_PROTO.

rollback

void rollback(Xid xid) throws XAException
Informs the resource manager to roll back work done on behalf of a transaction branch.
Parameters:
xid - A global transaction identifier.
Throws:
XAException - An error has occurred.

setTransactionTimeout

boolean setTransactionTimeout(int seconds) throws XAException
Sets the current transaction timeout value for this XAResource instance. Once set, this timeout value is effective until setTransactionTimeout is invoked again with a different value. To reset the timeout value to the default value used by the resource manager, set the value to zero. If the timeout operation is performed successfully, the method returns true; otherwise false. If a resource manager does not support explicitly setting the transaction timeout value, this method returns false.
Parameters:
seconds - The transaction timeout value in seconds.
Returns:
true if the transaction timeout value is set successfully; otherwise false.
Throws:
XAException - An error has occurred. Possible exception values are XAER_RMERR, XAER_RMFAIL, or XAER_INVAL.

start

void start(Xid xid, int flags) throws XAException
Starts work on behalf of a transaction branch specified in xid. If TMJOIN is specified, the start applies to joining a transaction previously seen by the resource manager. If TMRESUME is specified, the start applies to resuming a suspended transaction specified in the parameter xid. If neither TMJOIN nor TMRESUME is specified and the transaction specified by xid has previously been seen by the resource manager, the resource manager throws the XAException exception with XAER_DUPID error code.
Parameters:
xid - A global transaction identifier to be associated with the resource.
flags - One of TMNOFLAGS, TMJOIN, or TMRESUME.
Throws:
XAException - An error has occurred. Possible exceptions are XA_RB*, XAER_RMERR, XAER_RMFAIL, XAER_DUPID, XAER_OUTSIDE, XAER_NOTA, XAER_INVAL, or XAER_PROTO.

© 1993, 2023, Oracle and/or its affiliates. All rights reserved.
Documentation extracted from Debian's OpenJDK Development Kit package.
Licensed under the GNU General Public License, version 2, with the Classpath Exception.
Various third party code in OpenJDK is licensed under different licenses (see Debian package).
Java and OpenJDK are trademarks or registered trademarks of Oracle and/or its affiliates.
https://docs.oracle.com/en/java/javase/21/docs/api/java.transaction.xa/javax/transaction/xa/XAResource.html