This module provides access to the select() and poll() functions available in most operating systems, epoll() available on Linux 2.5+ and kqueue() available on most BSD. Note that on Windows, it only works for sockets; on other operating systems, it also works for other file types (in particular, on Unix, it works on pipes). It cannot be used on regular files to determine whether a file has grown since it was last read.
The module defines the following:
exception select.error The exception raised when an error occurs. The accompanying value is a pair containing the numeric error code from errno and the corresponding string, as would be printed by the C function perror().
select.epoll([sizehint=-1]) (Only supported on Linux 2.5.44 and newer.) Returns an edge polling object, which can be used as Edge or Level Triggered interface for I/O events; see section Edge and Level Trigger Polling (epoll) Objects below for the methods supported by epolling objects.
New in version 2.6.
select.poll() (Not supported by all operating systems.) Returns a polling object, which supports registering and unregistering file descriptors, and then polling them for I/O events; see section Polling Objects below for the methods supported by polling objects.
select.kqueue() (Only supported on BSD.) Returns a kernel queue object; see section Kqueue Objects below for the methods supported by kqueue objects.
New in version 2.6.
select.kevent(ident, filter=KQ_FILTER_READ, flags=KQ_EV_ADD, fflags=0, data=0, udata=0) (Only supported on BSD.) Returns a kernel event object; see section Kevent Objects below for the methods supported by kevent objects.
New in version 2.6.
select.select(rlist, wlist, xlist[, timeout]) This is a straightforward interface to the Unix select() system call. The first three arguments are sequences of ‘waitable objects’: either integers representing file descriptors or objects with a parameterless method named fileno() returning such an integer:
Empty sequences are allowed, but acceptance of three empty sequences is platform-dependent. (It is known to work on Unix but not on Windows.) The optional timeout argument specifies a time-out as a floating point number in seconds. When the timeout argument is omitted the function blocks until at least one file descriptor is ready. A time-out value of zero specifies a poll and never blocks.
The return value is a triple of lists of objects that are ready: subsets of the first three arguments. When the time-out is reached without a file descriptor becoming ready, three empty lists are returned.
Among the acceptable object types in the sequences are Python file objects (e.g. sys.stdin, or objects returned by open() or os.popen()), socket objects returned by socket.socket(). You may also define a wrapper class yourself, as long as it has an appropriate fileno() method (that really returns a file descriptor, not just a random integer).
Note
File objects on Windows are not acceptable, but sockets are. On Windows, the underlying select() function is provided by the WinSock library, and does not handle file descriptors that don’t originate from WinSock.
select.PIPE_BUF Files reported as ready for writing by select(), poll() or similar interfaces in this module are guaranteed to not block on a write of up to PIPE_BUF bytes. This value is guaranteed by POSIX to be at least 512. Availability: Unix.
New in version 2.7.
http://linux.die.net/man/4/epoll
eventmask
Constant | Meaning |
|---|---|
| Available for read |
| Available for write |
| Urgent data for read |
| Error condition happened on the assoc. fd |
| Hang up happened on the assoc. fd |
| Set Edge Trigger behavior, the default is Level Trigger behavior |
| Set one-shot behavior. After one event is pulled out, the fd is internally disabled |
| Equivalent to |
| Priority data band can be read. |
| Equivalent to |
| Priority data may be written. |
| Ignored. |
epoll.close() Close the control file descriptor of the epoll object.
epoll.fileno() Return the file descriptor number of the control fd.
epoll.fromfd(fd) Create an epoll object from a given file descriptor.
epoll.register(fd[, eventmask]) Register a fd descriptor with the epoll object.
Note
Registering a file descriptor that’s already registered raises an IOError – contrary to Polling Objects’s register.
epoll.modify(fd, eventmask) Modify a register file descriptor.
epoll.unregister(fd) Remove a registered file descriptor from the epoll object.
epoll.poll([timeout=-1[, maxevents=-1]]) Wait for events. timeout in seconds (float)
The poll() system call, supported on most Unix systems, provides better scalability for network servers that service many, many clients at the same time. poll() scales better because the system call only requires listing the file descriptors of interest, while select() builds a bitmap, turns on bits for the fds of interest, and then afterward the whole bitmap has to be linearly scanned again. select() is O(highest file descriptor), while poll() is O(number of file descriptors).
poll.register(fd[, eventmask]) Register a file descriptor with the polling object. Future calls to the poll() method will then check whether the file descriptor has any pending I/O events. fd can be either an integer, or an object with a fileno() method that returns an integer. File objects implement fileno(), so they can also be used as the argument.
eventmask is an optional bitmask describing the type of events you want to check for, and can be a combination of the constants POLLIN, POLLPRI, and POLLOUT, described in the table below. If not specified, the default value used will check for all 3 types of events.
Constant | Meaning |
|---|---|
| There is data to read |
| There is urgent data to read |
| Ready for output: writing will not block |
| Error condition of some sort |
| Hung up |
| Invalid request: descriptor not open |
Registering a file descriptor that’s already registered is not an error, and has the same effect as registering the descriptor exactly once.
poll.modify(fd, eventmask) Modifies an already registered fd. This has the same effect as register(fd, eventmask). Attempting to modify a file descriptor that was never registered causes an IOError exception with errno ENOENT to be raised.
New in version 2.6.
poll.unregister(fd) Remove a file descriptor being tracked by a polling object. Just like the register() method, fd can be an integer or an object with a fileno() method that returns an integer.
Attempting to remove a file descriptor that was never registered causes a KeyError exception to be raised.
poll.poll([timeout]) Polls the set of registered file descriptors, and returns a possibly-empty list containing (fd, event) 2-tuples for the descriptors that have events or errors to report. fd is the file descriptor, and event is a bitmask with bits set for the reported events for that descriptor — POLLIN for waiting input, POLLOUT to indicate that the descriptor can be written to, and so forth. An empty list indicates that the call timed out and no file descriptors had any events to report. If timeout is given, it specifies the length of time in milliseconds which the system will wait for events before returning. If timeout is omitted, negative, or None, the call will block until there is an event for this poll object.
kqueue.close() Close the control file descriptor of the kqueue object.
kqueue.fileno() Return the file descriptor number of the control fd.
kqueue.fromfd(fd) Create a kqueue object from a given file descriptor.
kqueue.control(changelist, max_events[, timeout]) → eventlist Low level interface to kevent
None
None, to wait foreverhttps://www.freebsd.org/cgi/man.cgi?query=kqueue&sektion=2
kevent.ident Value used to identify the event. The interpretation depends on the filter but it’s usually the file descriptor. In the constructor ident can either be an int or an object with a fileno() function. kevent stores the integer internally.
kevent.filter Name of the kernel filter.
Constant | Meaning |
|---|---|
| Takes a descriptor and returns whenever there is data available to read |
| Takes a descriptor and returns whenever there is data available to write |
| AIO requests |
| Returns when one or more of the requested events watched in fflag occurs |
| Watch for events on a process id |
| Watch for events on a network device [not available on Mac OS X] |
| Returns whenever the watched signal is delivered to the process |
| Establishes an arbitrary timer |
kevent.flags Filter action.
Constant | Meaning |
|---|---|
| Adds or modifies an event |
| Removes an event from the queue |
| Permitscontrol() to returns the event |
| Disablesevent |
| Removes event after first occurrence |
| Reset the state after an event is retrieved |
| internal event |
| internal event |
| Filter specific EOF condition |
| See return values |
kevent.fflags Filter specific flags.
KQ_FILTER_READ and KQ_FILTER_WRITE filter flags:
Constant | Meaning |
|---|---|
| low water mark of a socket buffer |
KQ_FILTER_VNODE filter flags:
Constant | Meaning |
|---|---|
| unlink() was called |
| a write occurred |
| the file was extended |
| an attribute was changed |
| the link count has changed |
| the file was renamed |
| access to the file was revoked |
KQ_FILTER_PROC filter flags:
Constant | Meaning |
|---|---|
| the process has exited |
| the process has called fork() |
| the process has executed a new process |
| internal filter flag |
| internal filter flag |
| follow a process across fork() |
| returned on the child process for NOTE_TRACK |
| unable to attach to a child |
KQ_FILTER_NETDEV filter flags (not available on Mac OS X):
Constant | Meaning |
|---|---|
| link is up |
| link is down |
| link state is invalid |
kevent.data Filter specific data.
kevent.udata User defined value.
© 2001–2020 Python Software Foundation
Licensed under the PSF License.
https://docs.python.org/2.7/library/select.html