salt.modules.lvs
Support for LVS (Linux Virtual Server)
salt.modules.lvs.add_server(protocol=None, service_address=None, server_address=None, packet_forward_method='dr', weight=1, **kwargs)
-
Add a real server to a virtual service.
- protocol
- The service protocol(only support
tcp, udp and fwmark service). - service_address
- The LVS service address.
- server_address
- The real server address.
- packet_forward_method
- The LVS packet forwarding method(
dr for direct routing, tunnel for tunneling, nat for network access translation). - weight
- The capacity of a server relative to the others in the pool.
CLI Example:
salt '*' lvs.add_server tcp 1.1.1.1:80 192.168.0.11:8080 nat 1
salt.modules.lvs.add_service(protocol=None, service_address=None, scheduler='wlc')
-
Add a virtual service.
- protocol
- The service protocol(only support tcp, udp and fwmark service).
- service_address
- The LVS service address.
- scheduler
- Algorithm for allocating TCP connections and UDP datagrams to real servers.
CLI Example:
salt '*' lvs.add_service tcp 1.1.1.1:80 rr
salt.modules.lvs.check_server(protocol=None, service_address=None, server_address=None, **kwargs)
-
Check the real server exists in the specified service.
CLI Example:
salt '*' lvs.check_server tcp 1.1.1.1:80 192.168.0.11:8080
salt.modules.lvs.check_service(protocol=None, service_address=None, **kwargs)
-
Check the virtual service exists.
CLI Example:
salt '*' lvs.check_service tcp 1.1.1.1:80
salt.modules.lvs.clear()
-
Clear the virtual server table
CLI Example:
salt '*' lvs.clear
salt.modules.lvs.delete_server(protocol=None, service_address=None, server_address=None)
-
Delete the realserver from the virtual service.
- protocol
- The service protocol(only support
tcp, udp and fwmark service). - service_address
- The LVS service address.
- server_address
- The real server address.
CLI Example:
salt '*' lvs.delete_server tcp 1.1.1.1:80 192.168.0.11:8080
salt.modules.lvs.delete_service(protocol=None, service_address=None)
-
Delete the virtual service.
- protocol
- The service protocol(only support tcp, udp and fwmark service).
- service_address
- The LVS service address.
CLI Example:
salt '*' lvs.delete_service tcp 1.1.1.1:80
salt.modules.lvs.edit_server(protocol=None, service_address=None, server_address=None, packet_forward_method=None, weight=None, **kwargs)
-
Edit a real server to a virtual service.
- protocol
- The service protocol(only support
tcp, udp and fwmark service). - service_address
- The LVS service address.
- server_address
- The real server address.
- packet_forward_method
- The LVS packet forwarding method(
dr for direct routing, tunnel for tunneling, nat for network access translation). - weight
- The capacity of a server relative to the others in the pool.
CLI Example:
salt '*' lvs.edit_server tcp 1.1.1.1:80 192.168.0.11:8080 nat 1
salt.modules.lvs.edit_service(protocol=None, service_address=None, scheduler=None)
-
Edit the virtual service.
- protocol
- The service protocol(only support tcp, udp and fwmark service).
- service_address
- The LVS service address.
- scheduler
- Algorithm for allocating TCP connections and UDP datagrams to real servers.
CLI Example:
salt '*' lvs.edit_service tcp 1.1.1.1:80 rr
salt.modules.lvs.get_rules()
-
Get the virtual server rules
CLI Example:
salt '*' lvs.get_rules
salt.modules.lvs.list_(protocol=None, service_address=None)
-
List the virtual server table if service_address is not specified. If a service_address is selected, list this service only.
CLI Example:
salt '*' lvs.list
salt.modules.lvs.zero(protocol=None, service_address=None)
-
Zero the packet, byte and rate counters in a service or all services.
CLI Example:
salt '*' lvs.zero