The class of the iterator returned by the iterator
method. multiple take
, drop
, and slice
operations on this iterator are bunched together for better efficiency.
A class supporting filtered operations. Instances of this class are returned by method withFilter
.
The type implementing this traversable
Test two objects for inequality.
true
if !(this == that), false otherwise.
Equivalent to x.hashCode
except for boxed numeric types and null
. For numerics, it returns a hash value which is consistent with value equality: if two value type instances compare as true, then ## will produce the same hash value for each of them. For null
returns a hashcode where null.hashCode
throws a NullPointerException
.
a hash value consistent with ==
Returns a new traversable collection containing the elements from the left hand operand followed by the elements from the right hand operand. The element type of the traversable collection is the most specific superclass encompassing the element types of the two operands.
the element type of the returned collection.
the class of the returned collection. Where possible, That
is the same class as the current collection class Repr
, but this depends on the element type B
being admissible for that class, which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the traversable to append.
an implicit value of class CanBuildFrom
which determines the result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
which contains all elements of this traversable collection followed by all elements of that
.
As with ++
, returns a new collection containing the elements from the left operand followed by the elements from the right operand.
It differs from ++
in that the right operand determines the type of the resulting collection rather than the left one. Mnemonic: the COLon is on the side of the new COLlection type.
Example:
scala> val x = List(1) x: List[Int] = List(1) scala> val y = LinkedList(2) y: scala.collection.mutable.LinkedList[Int] = LinkedList(2) scala> val z = x ++: y z: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2)
This overload exists because: for the implementation of ++:
we should reuse that of ++
because many collections override it with more efficient versions.
Since TraversableOnce
has no ++
method, we have to implement that directly, but Traversable
and down can use the overload.
the element type of the returned collection.
the class of the returned collection. Where possible, That
is the same class as the current collection class Repr
, but this depends on the element type B
being admissible for that class, which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the traversable to append.
an implicit value of class CanBuildFrom
which determines the result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
which contains all elements of this traversable collection followed by all elements of that
.
As with ++
, returns a new collection containing the elements from the left operand followed by the elements from the right operand.
It differs from ++
in that the right operand determines the type of the resulting collection rather than the left one. Mnemonic: the COLon is on the side of the new COLlection type.
Example:
scala> val x = List(1) x: List[Int] = List(1) scala> val y = LinkedList(2) y: scala.collection.mutable.LinkedList[Int] = LinkedList(2) scala> val z = x ++: y z: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2)
the element type of the returned collection.
the traversable to append.
a new mutable indexed sequence which contains all elements of this mutable indexed sequence followed by all elements of that
.
A copy of the mutable indexed sequence with an element prepended.
Note that :-ending operators are right associative (see example). A mnemonic for +:
vs. :+
is: the COLon goes on the COLlection side.
Also, the original mutable indexed sequence is not modified, so you will want to capture the result.
Example:
scala> val x = List(1) x: List[Int] = List(1) scala> val y = 2 +: x y: List[Int] = List(2, 1) scala> println(x) List(1)
the prepended element
a new mutable indexed sequence consisting of elem
followed by all elements of this mutable indexed sequence.
Applies a binary operator to a start value and all elements of this traversable or iterator, going left to right.
Note: /:
is alternate syntax for foldLeft
; z /: xs
is the same as xs foldLeft z
.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = List(1,2,3,4) a: List[Int] = List(1, 2, 3, 4) scala> val b = (5 /: a)(_+_) b: Int = 15 scala> val c = (5 /: a)((x,y) => x + y) c: Int = 15
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op
between consecutive elements of this traversable or iterator, going left to right with the start value z
on the left:
op(...op(op(z, x_1), x_2), ..., x_n)
where x_{1}, ..., x_{n}
are the elements of this traversable or iterator.
A copy of this mutable indexed sequence with an element appended.
A mnemonic for +:
vs. :+
is: the COLon goes on the COLlection side.
Example:
scala> val a = List(1) a: List[Int] = List(1) scala> val b = a :+ 2 b: List[Int] = List(1, 2) scala> println(a) List(1)
the appended element
a new mutable indexed sequence consisting of all elements of this mutable indexed sequence followed by elem
.
Applies a binary operator to all elements of this traversable or iterator and a start value, going right to left.
Note: :\
is alternate syntax for foldRight
; xs :\ z
is the same as xs foldRight z
.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = List(1,2,3,4) a: List[Int] = List(1, 2, 3, 4) scala> val b = (a :\ 5)(_+_) b: Int = 15 scala> val c = (a :\ 5)((x,y) => x + y) c: Int = 15
the result type of the binary operator.
the start value
the binary operator
the result of inserting op
between consecutive elements of this traversable or iterator, going right to left with the start value z
on the right:
op(x_1, op(x_2, ... op(x_n, z)...))
where x_{1}, ..., x_{n}
are the elements of this traversable or iterator.
Test two objects for equality. The expression x == that
is equivalent to if (x eq null) that eq null else x.equals(that)
.
true
if the receiver object is equivalent to the argument; false
otherwise.
Appends all elements of this traversable or iterator to a string builder. The written text consists of the string representations (w.r.t. the method toString
) of all elements of this traversable or iterator without any separator string.
Example:
scala> val a = List(1,2,3,4) a: List[Int] = List(1, 2, 3, 4) scala> val b = new StringBuilder() b: StringBuilder = scala> val h = a.addString(b) h: StringBuilder = 1234
the string builder to which elements are appended.
the string builder b
to which elements were appended.
Appends all elements of this traversable or iterator to a string builder using a separator string. The written text consists of the string representations (w.r.t. the method toString
) of all elements of this traversable or iterator, separated by the string sep
.
Example:
scala> val a = List(1,2,3,4) a: List[Int] = List(1, 2, 3, 4) scala> val b = new StringBuilder() b: StringBuilder = scala> a.addString(b, ", ") res0: StringBuilder = 1, 2, 3, 4
the string builder to which elements are appended.
the separator string.
the string builder b
to which elements were appended.
Appends all elements of this traversable or iterator to a string builder using start, end, and separator strings. The written text begins with the string start
and ends with the string end
. Inside, the string representations (w.r.t. the method toString
) of all elements of this traversable or iterator are separated by the string sep
.
Example:
scala> val a = List(1,2,3,4) a: List[Int] = List(1, 2, 3, 4) scala> val b = new StringBuilder() b: StringBuilder = scala> a.addString(b , "List(" , ", " , ")") res5: StringBuilder = List(1, 2, 3, 4)
the string builder to which elements are appended.
the starting string.
the separator string.
the ending string.
the string builder b
to which elements were appended.
Aggregates the results of applying an operator to subsequent elements.
This is a more general form of fold
and reduce
. It is similar to foldLeft
in that it doesn't require the result to be a supertype of the element type. In addition, it allows parallel collections to be processed in chunks, and then combines the intermediate results.
aggregate
splits the traversable or iterator into partitions and processes each partition by sequentially applying seqop
, starting with z
(like foldLeft
). Those intermediate results are then combined by using combop
(like fold
). The implementation of this operation may operate on an arbitrary number of collection partitions (even 1), so combop
may be invoked an arbitrary number of times (even 0).
As an example, consider summing up the integer values of a list of chars. The initial value for the sum is 0. First, seqop
transforms each input character to an Int and adds it to the sum (of the partition). Then, combop
just needs to sum up the intermediate results of the partitions:
List('a', 'b', 'c').aggregate(0)({ (sum, ch) => sum + ch.toInt }, { (p1, p2) => p1 + p2 })
the type of accumulated results
the initial value for the accumulated result of the partition - this will typically be the neutral element for the seqop
operator (e.g. Nil
for list concatenation or 0
for summation) and may be evaluated more than once
an operator used to accumulate results within a partition
an associative operator used to combine results from different partitions
Selects an element by its index in the mutable indexed sequence.
Example:
scala> val x = List(1, 2, 3, 4, 5) x: List[Int] = List(1, 2, 3, 4, 5) scala> x(3) res1: Int = 4
the element of this mutable indexed sequence at index idx
, where 0
indicates the first element.
IndexOutOfBoundsException
if idx
does not satisfy 0 <= idx < length
.
Cast the receiver object to be of type T0
.
Note that the success of a cast at runtime is modulo Scala's erasure semantics. Therefore the expression 1.asInstanceOf[String]
will throw a ClassCastException
at runtime, while the expression List(1).asInstanceOf[List[String]]
will not. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the requested type.
the receiver object.
ClassCastException
if the receiver object is not an instance of the erasure of type T0
.
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind.
The object with which this iterable collection should be compared
true
, if this iterable collection can possibly equal that
, false
otherwise. The test takes into consideration only the run-time types of objects but ignores their elements.
Builds a new collection by applying a partial function to all elements of this mutable indexed sequence on which the function is defined.
the element type of the returned collection.
the partial function which filters and maps the mutable indexed sequence.
a new mutable indexed sequence resulting from applying the given partial function pf
to each element on which it is defined and collecting the results. The order of the elements is preserved.
Finds the first element of the traversable or iterator for which the given partial function is defined, and applies the partial function to it.
Note: may not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the partial function
an option value containing pf applied to the first value for which it is defined, or None
if none exists.
Seq("a", 1, 5L).collectFirst({ case x: Int => x*10 }) = Some(10)
Iterates over combinations. A _combination_ of length n
is a subsequence of the original sequence, with the elements taken in order. Thus, "xy"
and "yy"
are both length-2 combinations of "xyy"
, but "yx"
is not. If there is more than one way to generate the same subsequence, only one will be returned.
For example, "xyyy"
has three different ways to generate "xy"
depending on whether the first, second, or third "y"
is selected. However, since all are identical, only one will be chosen. Which of the three will be taken is an implementation detail that is not defined.
An Iterator which traverses the possible n-element combinations of this sequence.
"abbbc".combinations(2) = Iterator(ab, ac, bb, bc)
Tests whether this sequence contains a given value as an element.
Note: may not terminate for infinite-sized collections.
the element to test.
true
if this sequence has an element that is equal (as determined by ==
) to elem
, false
otherwise.
Tests whether this sequence contains a given sequence as a slice.
Note: may not terminate for infinite-sized collections.
the sequence to test
true
if this sequence contains a slice with the same elements as that
, otherwise false
.
Copies the elements of this mutable indexed sequence to an array. Fills the given array xs
with at most len
elements of this mutable indexed sequence, starting at position start
. Copying will stop once either the end of the current mutable indexed sequence is reached, or the end of the target array is reached, or len
elements have been copied.
the array to fill.
the starting index.
the maximal number of elements to copy.
Copies the elements of this mutable indexed sequence to an array. Fills the given array xs
with values of this mutable indexed sequence. Copying will stop once either the end of the current mutable indexed sequence is reached, or the end of the target array is reached.
the array to fill.
Copies the elements of this mutable indexed sequence to an array. Fills the given array xs
with values of this mutable indexed sequence, beginning at index start
. Copying will stop once either the end of the current mutable indexed sequence is reached, or the end of the target array is reached.
the array to fill.
the starting index.
Copies all elements of this traversable or iterator to a buffer.
Note: will not terminate for infinite-sized collections.
The buffer to which elements are copied.
Tests whether every element of this sequence relates to the corresponding element of another sequence by satisfying a test predicate.
the type of the elements of that
the other sequence
the test predicate, which relates elements from both sequences
true
if both sequences have the same length and p(x, y)
is true
for all corresponding elements x
of this sequence and y
of that
, otherwise false
.
Counts the number of elements in the traversable or iterator which satisfy a predicate.
the predicate used to test elements.
the number of elements satisfying the predicate p
.
Creates a possible nested IndexedSeq
which consists of all the elements of this array. If the elements are arrays themselves, the deep
transformation is applied recursively to them. The stringPrefix
of the IndexedSeq
is "Array", hence the IndexedSeq
prints like an array with all its elements shown, and the same recursively for any subarrays.
Example:
Array(Array(1, 2), Array(3, 4)).deep.toString
prints: Array(Array(1, 2), Array(3, 4))
An possibly nested indexed sequence of consisting of all the elements of the array.
Computes the multiset difference between this mutable indexed sequence and another sequence.
the sequence of elements to remove
a new mutable indexed sequence which contains all elements of this mutable indexed sequence except some of occurrences of elements that also appear in that
. If an element value x
appears n times in that
, then the first n occurrences of x
will not form part of the result, but any following occurrences will.
Builds a new sequence from this sequence without any duplicate elements.
Note: will not terminate for infinite-sized collections.
A new sequence which contains the first occurrence of every element of this sequence.
Selects all elements except first n ones.
the number of elements to drop from this sequence.
a sequence consisting of all elements of this sequence except the first n
ones, or else the empty sequence, if this sequence has less than n
elements. If n
is negative, don't drop any elements.
Selects all elements except last n ones.
The number of elements to take
a sequence consisting of all elements of this sequence except the last n
ones, or else the empty sequence, if this sequence has less than n
elements.
Drops longest prefix of elements that satisfy a predicate.
the longest suffix of this sequence whose first element does not satisfy the predicate p
.
Tests whether this sequence ends with the given sequence.
the sequence to test
true
if this sequence has that
as a suffix, false
otherwise.
Tests whether a predicate holds for at least one element of this sequence.
the predicate used to test elements.
false
if this sequence is empty, otherwise true
if the given predicate p
holds for some of the elements of this sequence, otherwise false
Selects all elements of this traversable collection which satisfy a predicate.
the predicate used to test elements.
a new traversable collection consisting of all elements of this traversable collection that satisfy the given predicate p
. The order of the elements is preserved.
Selects all elements of this traversable collection which do not satisfy a predicate.
the predicate used to test elements.
a new traversable collection consisting of all elements of this traversable collection that do not satisfy the given predicate p
. The order of the elements is preserved.
Finds the first element of the sequence satisfying a predicate, if any.
the predicate used to test elements.
an option value containing the first element in the sequence that satisfies p
, or None
if none exists.
Builds a new collection by applying a function to all elements of this mutable indexed sequence and using the elements of the resulting collections.
For example:
def getWords(lines: Seq[String]): Seq[String] = lines flatMap (line => line split "\\W+")
The type of the resulting collection is guided by the static type of mutable indexed sequence. This might cause unexpected results sometimes. For example:
// lettersOf will return a Seq[Char] of likely repeated letters, instead of a Set def lettersOf(words: Seq[String]) = words flatMap (word => word.toSet) // lettersOf will return a Set[Char], not a Seq def lettersOf(words: Seq[String]) = words.toSet flatMap (word => word.toSeq) // xs will be an Iterable[Int] val xs = Map("a" -> List(11,111), "b" -> List(22,222)).flatMap(_._2) // ys will be a Map[Int, Int] val ys = Map("a" -> List(1 -> 11,1 -> 111), "b" -> List(2 -> 22,2 -> 222)).flatMap(_._2)
the element type of the returned collection.
the function to apply to each element.
a new mutable indexed sequence resulting from applying the given collection-valued function f
to each element of this mutable indexed sequence and concatenating the results.
Flattens a two-dimensional array by concatenating all its rows into a single array.
Type of row elements.
A function that converts elements of this array to rows - arrays of type U
.
An array obtained by concatenating rows of this array.
Folds the elements of this traversable or iterator using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
Note: will not terminate for infinite-sized collections.
a type parameter for the binary operator, a supertype of A
.
a neutral element for the fold operation; may be added to the result an arbitrary number of times, and must not change the result (e.g., Nil
for list concatenation, 0 for addition, or 1 for multiplication).
a binary operator that must be associative.
the result of applying the fold operator op
between all the elements and z
, or z
if this traversable or iterator is empty.
Applies a binary operator to a start value and all elements of this sequence, going left to right.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op
between consecutive elements of this sequence, going left to right with the start value z
on the left:
op(...op(z, x_1), x_2, ..., x_n)
where x_{1}, ..., x_{n}
are the elements of this sequence. Returns z
if this sequence is empty.
Applies a binary operator to all elements of this sequence and a start value, going right to left.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op
between consecutive elements of this sequence, going right to left with the start value z
on the right:
op(x_1, op(x_2, ... op(x_n, z)...))
where x_{1}, ..., x_{n}
are the elements of this sequence. Returns z
if this sequence is empty.
Tests whether a predicate holds for all elements of this sequence.
the predicate used to test elements.
true
if this sequence is empty or the given predicate p
holds for all elements of this sequence, otherwise false
.
Applies a function f
to all elements of this mutable indexed sequence.
Note: this method underlies the implementation of most other bulk operations. Subclasses should re-implement this method if a more efficient implementation exists.
the function that is applied for its side-effect to every element. The result of function f
is discarded.
Returns string formatted according to given format
string. Format strings are as for String.format
(@see java.lang.String.format).
Returns the runtime class representation of the object.
a class object corresponding to the runtime type of the receiver.
Partitions this traversable collection into a map of traversable collections according to some discriminator function.
Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new traversable collection.
the type of keys returned by the discriminator function.
the discriminator function.
A map from keys to traversable collections such that the following invariant holds:
(xs groupBy f)(k) = xs filter (x => f(x) == k)
That is, every key k
is bound to a traversable collection of those elements x
for which f(x)
equals k
.
Partitions elements in fixed size iterable collections.
the number of elements per group
An iterator producing iterable collections of size size
, except the last will be less than size size
if the elements don't divide evenly.
scala.collection.Iterator, method grouped
Tests whether this traversable collection is known to have a finite size. All strict collections are known to have finite size. For a non-strict collection such as Stream
, the predicate returns true
if all elements have been computed. It returns false
if the stream is not yet evaluated to the end. Non-empty Iterators usually return false
even if they were created from a collection with a known finite size.
Note: many collection methods will not work on collections of infinite sizes. The typical failure mode is an infinite loop. These methods always attempt a traversal without checking first that hasDefiniteSize
returns true
. However, checking hasDefiniteSize
can provide an assurance that size is well-defined and non-termination is not a concern.
true
if this collection is known to have finite size, false
otherwise.
Selects the first element of this sequence.
the first element of this sequence.
NoSuchElementException
if the sequence is empty.
Optionally selects the first element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the first element of this traversable collection if it is nonempty, None
if it is empty.
Finds index of first occurrence of some value in this mutable indexed sequence after or at some start index.
the element value to search for.
the start index
the index >= from
of the first element of this mutable indexed sequence that is equal (as determined by ==
) to elem
, or -1
, if none exists.
Finds index of first occurrence of some value in this mutable indexed sequence.
the element value to search for.
the index of the first element of this mutable indexed sequence that is equal (as determined by ==
) to elem
, or -1
, if none exists.
Finds first index after or at a start index where this sequence contains a given sequence as a slice.
Note: may not terminate for infinite-sized collections.
the sequence to test
the start index
the first index >= from
such that the elements of this sequence starting at this index match the elements of sequence that
, or -1
of no such subsequence exists.
Finds first index where this sequence contains a given sequence as a slice.
Note: may not terminate for infinite-sized collections.
the sequence to test
the first index such that the elements of this sequence starting at this index match the elements of sequence that
, or -1
of no such subsequence exists.
Finds index of the first element satisfying some predicate after or at some start index.
the predicate used to test elements.
the start index
the index >= from
of the first element of this sequence that satisfies the predicate p
, or -1
, if none exists.
Finds index of first element satisfying some predicate.
Note: may not terminate for infinite-sized collections.
the predicate used to test elements.
the index of the first element of this general sequence that satisfies the predicate p
, or -1
, if none exists.
Produces the range of all indices of this sequence.
a Range
value from 0
to one less than the length of this sequence.
Selects all elements except the last.
a sequence consisting of all elements of this sequence except the last one.
UnsupportedOperationException
if the sequence is empty.
Iterates over the inits of this traversable collection. The first value will be this traversable collection and the final one will be an empty traversable collection, with the intervening values the results of successive applications of init
.
an iterator over all the inits of this traversable collection
List(1,2,3).inits = Iterator(List(1,2,3), List(1,2), List(1), Nil)
Computes the multiset intersection between this mutable indexed sequence and another sequence.
the sequence of elements to intersect with.
a new mutable indexed sequence which contains all elements of this mutable indexed sequence which also appear in that
. If an element value x
appears n times in that
, then the first n occurrences of x
will be retained in the result, but any following occurrences will be omitted.
Tests whether this general sequence contains given index.
The implementations of methods apply
and isDefinedAt
turn a Seq[A]
into a PartialFunction[Int, A]
.
the index to test
true
if this general sequence contains an element at position idx
, false
otherwise.
Tests whether this sequence is empty.
true
if the sequence contain no elements, false
otherwise.
Test whether the dynamic type of the receiver object is T0
.
Note that the result of the test is modulo Scala's erasure semantics. Therefore the expression 1.isInstanceOf[String]
will return false
, while the expression List(1).isInstanceOf[List[String]]
will return true
. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the specified type.
true
if the receiver object is an instance of erasure of type T0
; false
otherwise.
Tests whether this traversable collection can be repeatedly traversed.
true
Creates a new iterator over all elements contained in this iterable object.
the new iterator
Selects the last element.
The last element of this sequence.
NoSuchElementException
If the sequence is empty.
Finds index of last occurrence of some value in this mutable indexed sequence before or at a given end index.
the element value to search for.
the end index.
the index <= end
of the last element of this mutable indexed sequence that is equal (as determined by ==
) to elem
, or -1
, if none exists.
Finds index of last occurrence of some value in this mutable indexed sequence.
the element value to search for.
the index of the last element of this mutable indexed sequence that is equal (as determined by ==
) to elem
, or -1
, if none exists.
Finds last index before or at a given end index where this sequence contains a given sequence as a slice.
the sequence to test
the end index
the last index <= end
such that the elements of this sequence starting at this index match the elements of sequence that
, or -1
of no such subsequence exists.
Finds last index where this sequence contains a given sequence as a slice.
Note: will not terminate for infinite-sized collections.
the sequence to test
the last index such that the elements of this sequence starting a this index match the elements of sequence that
, or -1
of no such subsequence exists.
Finds index of last element satisfying some predicate before or at given end index.
the predicate used to test elements.
the index <= end
of the last element of this sequence that satisfies the predicate p
, or -1
, if none exists.
Finds index of last element satisfying some predicate.
Note: will not terminate for infinite-sized collections.
the predicate used to test elements.
the index of the last element of this general sequence that satisfies the predicate p
, or -1
, if none exists.
Optionally selects the last element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the last element of this traversable collection$ if it is nonempty, None
if it is empty.
The length of the mutable indexed sequence.
Note: xs.length
and xs.size
yield the same result.
the number of elements in this mutable indexed sequence.
IllegalArgumentException
if the length of the sequence cannot be represented in an Int
, for example, (-1 to Int.MaxValue).length
.
Compares the length of this sequence to a test value.
the test value that gets compared with the length.
A value x
where
x < 0 if this.length < len x == 0 if this.length == len x > 0 if this.length > len
The method as implemented here does not call length
directly; its running time is O(length min len)
instead of O(length)
. The method should be overwritten if computing length
is cheap.
Builds a new collection by applying a function to all elements of this mutable indexed sequence.
the element type of the returned collection.
the function to apply to each element.
a new mutable indexed sequence resulting from applying the given function f
to each element of this mutable indexed sequence and collecting the results.
Finds the largest element.
the largest element of this mutable indexed sequence.
UnsupportedOperationException
if this mutable indexed sequence is empty.
Finds the first element which yields the largest value measured by function f.
The result type of the function f.
The measuring function.
the first element of this mutable indexed sequence with the largest value measured by function f.
UnsupportedOperationException
if this mutable indexed sequence is empty.
Finds the smallest element.
the smallest element of this mutable indexed sequence
UnsupportedOperationException
if this mutable indexed sequence is empty.
Finds the first element which yields the smallest value measured by function f.
The result type of the function f.
The measuring function.
the first element of this mutable indexed sequence with the smallest value measured by function f.
UnsupportedOperationException
if this mutable indexed sequence is empty.
Displays all elements of this traversable or iterator in a string.
a string representation of this traversable or iterator. In the resulting string the string representations (w.r.t. the method toString
) of all elements of this traversable or iterator follow each other without any separator string.
Displays all elements of this traversable or iterator in a string using a separator string.
the separator string.
a string representation of this traversable or iterator. In the resulting string the string representations (w.r.t. the method toString
) of all elements of this traversable or iterator are separated by the string sep
.
List(1, 2, 3).mkString("|") = "1|2|3"
Displays all elements of this traversable or iterator in a string using start, end, and separator strings.
the starting string.
the separator string.
the ending string.
a string representation of this traversable or iterator. The resulting string begins with the string start
and ends with the string end
. Inside, the string representations (w.r.t. the method toString
) of all elements of this traversable or iterator are separated by the string sep
.
List(1, 2, 3).mkString("(", "; ", ")") = "(1; 2; 3)"
Creates a new builder for this collection type.
Tests whether the traversable or iterator is not empty.
true
if the traversable or iterator contains at least one element, false
otherwise.
A copy of this mutable indexed sequence with an element value appended until a given target length is reached.
the target length
the padding value
a new mutable indexed sequence consisting of all elements of this mutable indexed sequence followed by the minimal number of occurrences of elem
so that the resulting mutable indexed sequence has a length of at least len
.
Returns a parallel implementation of this collection.
For most collection types, this method creates a new parallel collection by copying all the elements. For these collection, par
takes linear time. Mutable collections in this category do not produce a mutable parallel collection that has the same underlying dataset, so changes in one collection will not be reflected in the other one.
Specific collections (e.g. ParArray
or mutable.ParHashMap
) override this default behaviour by creating a parallel collection which shares the same underlying dataset. For these collections, par
takes constant or sublinear time.
All parallel collections return a reference to themselves.
a parallel implementation of this collection
The default par
implementation uses the combiner provided by this method to create a new parallel collection.
a combiner for the parallel collection of type ParRepr
Partitions this traversable collection in two traversable collections according to a predicate.
the predicate on which to partition.
a pair of traversable collections: the first traversable collection consists of all elements that satisfy the predicate p
and the second traversable collection consists of all elements that don't. The relative order of the elements in the resulting traversable collections is the same as in the original traversable collection.
Produces a new mutable indexed sequence where a slice of elements in this mutable indexed sequence is replaced by another sequence.
the index of the first replaced element
the number of elements to drop in the original mutable indexed sequence
a new mutable indexed sequence consisting of all elements of this mutable indexed sequence except that replaced
elements starting from from
are replaced by patch
.
Iterates over distinct permutations.
An Iterator which traverses the distinct permutations of this sequence.
"abb".permutations = Iterator(abb, bab, bba)
Returns the length of the longest prefix whose elements all satisfy some predicate.
Note: may not terminate for infinite-sized collections.
the predicate used to test elements.
the length of the longest prefix of this general sequence such that every element of the segment satisfies the predicate p
.
Multiplies up the elements of this collection.
the product of all elements in this mutable indexed sequence of numbers of type Int
. Instead of Int
, any other type T
with an implicit Numeric[T]
implementation can be used as element type of the mutable indexed sequence and as result type of product
. Examples of such types are: Long
, Float
, Double
, BigInt
.
Reduces the elements of this traversable or iterator using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
A type parameter for the binary operator, a supertype of A
.
A binary operator that must be associative.
The result of applying reduce operator op
between all the elements if the traversable or iterator is nonempty.
UnsupportedOperationException
if this traversable or iterator is empty.
Applies a binary operator to all elements of this sequence, going left to right.
the result type of the binary operator.
the binary operator.
the result of inserting op
between consecutive elements of this sequence, going left to right:
op( op( ... op(x_1, x_2) ..., x_{n-1}), x_n)
where x_{1}, ..., x_{n}
are the elements of this sequence.
UnsupportedOperationException
if this sequence is empty.
Optionally applies a binary operator to all elements of this traversable or iterator, going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceLeft(op)
if this traversable or iterator is nonempty, None
otherwise.
Reduces the elements of this traversable or iterator, if any, using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
A type parameter for the binary operator, a supertype of A
.
A binary operator that must be associative.
An option value containing result of applying reduce operator op
between all the elements if the collection is nonempty, and None
otherwise.
Applies a binary operator to all elements of this sequence, going right to left.
the result type of the binary operator.
the binary operator.
the result of inserting op
between consecutive elements of this sequence, going right to left:
op(x_1, op(x_2, ..., op(x_{n-1}, x_n)...))
where x_{1}, ..., x_{n}
are the elements of this sequence.
UnsupportedOperationException
if this sequence is empty.
Optionally applies a binary operator to all elements of this traversable or iterator, going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceRight(op)
if this traversable or iterator is nonempty, None
otherwise.
The collection of type mutable indexed sequence underlying this TraversableLike
object. By default this is implemented as the TraversableLike
object itself, but this can be overridden.
Returns new sequence with elements in reversed order.
A new sequence with all elements of this sequence in reversed order.
An iterator yielding elements in reversed order.
Note: xs.reverseIterator
is the same as xs.reverse.iterator
but might be more efficient.
an iterator yielding the elements of this sequence in reversed order
Builds a new collection by applying a function to all elements of this mutable indexed sequence and collecting the results in reversed order.
Note: xs.reverseMap(f)
is the same as xs.reverse.map(f)
but might be more efficient.
the element type of the returned collection.
the function to apply to each element.
a new mutable indexed sequence resulting from applying the given function f
to each element of this mutable indexed sequence and collecting the results in reversed order.
Checks if the other iterable collection contains the same elements in the same order as this mutable indexed sequence.
the collection to compare with.
true
, if both collections contain the same elements in the same order, false
otherwise.
Computes a prefix scan of the elements of the collection.
Note: The neutral element z
may be applied more than once.
element type of the resulting collection
type of the resulting collection
neutral element for the operator op
the associative operator for the scan
combiner factory which provides a combiner
a new traversable collection containing the prefix scan of the elements in this traversable collection
Produces a collection containing cumulative results of applying the operator going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom
which determines the result class That
from the current representation type Repr
and the new element type B
.
collection with intermediate results
Produces a collection containing cumulative results of applying the operator going right to left. The head of the collection is the last cumulative result.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Example:
List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom
which determines the result class That
from the current representation type Repr
and the new element type B
.
collection with intermediate results
(Changed in version 2.9.0) The behavior of scanRight
has changed. The previous behavior can be reproduced with scanRight.reverse.
Computes length of longest segment whose elements all satisfy some predicate.
the predicate used to test elements.
the index where the search starts.
the length of the longest segment of this sequence starting from index from
such that every element of the segment satisfies the predicate p
.
A version of this collection with all of the operations implemented sequentially (i.e., in a single-threaded manner).
This method returns a reference to this collection. In parallel collections, it is redefined to return a sequential implementation of this collection. In both cases, it has O(1) complexity.
a sequential view of the collection.
The size of this sequence, equivalent to length
.
Note: will not terminate for infinite-sized collections.
the number of elements in this sequence.
The size of this sequence, if it can be cheaply computed
the number of elements in this sequence, or -1 if the size cannot be determined cheaply
Selects an interval of elements. The returned collection is made up of all elements x
which satisfy the invariant:
from <= indexOf(x) < until
a mutable indexed sequence containing the elements greater than or equal to index from
extending up to (but not including) index until
of this mutable indexed sequence.
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.)
the number of elements per group
the distance between the first elements of successive groups
An iterator producing iterable collections of size size
, except the last element (which may be the only element) will be truncated if there are fewer than size
elements remaining to be grouped.
scala.collection.Iterator, method sliding
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped
.) The "sliding window" step is set to one.
the number of elements per group
An iterator producing iterable collections of size size
, except the last element (which may be the only element) will be truncated if there are fewer than size
elements remaining to be grouped.
scala.collection.Iterator, method sliding
Sorts this Seq
according to the Ordering which results from transforming an implicitly given Ordering with a transformation function.
the target type of the transformation f
, and the type where the ordering ord
is defined.
the transformation function mapping elements to some other domain B
.
the ordering assumed on domain B
.
a sequence consisting of the elements of this sequence sorted according to the ordering where x < y
if ord.lt(f(x), f(y))
.
val words = "The quick brown fox jumped over the lazy dog".split(' ') // this works because scala.Ordering will implicitly provide an Ordering[Tuple2[Int, Char]] words.sortBy(x => (x.length, x.head)) res0: Array[String] = Array(The, dog, fox, the, lazy, over, brown, quick, jumped)
scala.math.Ordering Note: will not terminate for infinite-sized collections.
Sorts this sequence according to a comparison function.
Note: will not terminate for infinite-sized collections.
The sort is stable. That is, elements that are equal (as determined by lt
) appear in the same order in the sorted sequence as in the original.
the comparison function which tests whether its first argument precedes its second argument in the desired ordering.
a sequence consisting of the elements of this sequence sorted according to the comparison function lt
.
List("Steve", "Tom", "John", "Bob").sortWith(_.compareTo(_) < 0) = List("Bob", "John", "Steve", "Tom")
Sorts this sequence according to an Ordering.
The sort is stable. That is, elements that are equal (as determined by lt
) appear in the same order in the sorted sequence as in the original.
the ordering to be used to compare elements.
a sequence consisting of the elements of this sequence sorted according to the ordering ord
.
Splits this sequence into a prefix/suffix pair according to a predicate.
Note: c span p
is equivalent to (but possibly more efficient than) (c takeWhile p, c dropWhile p)
, provided the evaluation of the predicate p
does not cause any side-effects.
a pair consisting of the longest prefix of this sequence whose elements all satisfy p
, and the rest of this sequence.
Splits this sequence into two at a given position. Note: c splitAt n
is equivalent to (but possibly more efficient than) (c take n, c drop n)
.
the position at which to split.
a pair of sequences consisting of the first n
elements of this sequence, and the other elements.
Tests whether this sequence contains the given sequence at a given index.
Note: If the both the receiver object this
and the argument that
are infinite sequences this method may not terminate.
the sequence to test
the index where the sequence is searched.
true
if the sequence that
is contained in this sequence at index offset
, otherwise false
.
Tests whether this general sequence starts with the given sequence.
the sequence to test
true
if this collection has that
as a prefix, false
otherwise.
Defines the prefix of this object's toString
representation.
a string representation which starts the result of toString
applied to this traversable collection. By default the string prefix is the simple name of the collection class traversable collection.
Sums up the elements of this collection.
the sum of all elements in this mutable indexed sequence of numbers of type Int
. Instead of Int
, any other type T
with an implicit Numeric[T]
implementation can be used as element type of the mutable indexed sequence and as result type of sum
. Examples of such types are: Long
, Float
, Double
, BigInt
.
Selects all elements except the first.
a sequence consisting of all elements of this sequence except the first one.
java.lang.UnsupportedOperationException
if the sequence is empty.
Iterates over the tails of this traversable collection. The first value will be this traversable collection and the final one will be an empty traversable collection, with the intervening values the results of successive applications of tail
.
an iterator over all the tails of this traversable collection
List(1,2,3).tails = Iterator(List(1,2,3), List(2,3), List(3), Nil)
Selects first n elements.
the number of elements to take from this sequence.
a sequence consisting only of the first n
elements of this sequence, or else the whole sequence, if it has less than n
elements. If n
is negative, returns an empty sequence.
Selects last n elements.
the number of elements to take
a sequence consisting only of the last n
elements of this sequence, or else the whole sequence, if it has less than n
elements.
Takes longest prefix of elements that satisfy a predicate.
the longest prefix of this sequence whose elements all satisfy the predicate p
.
The underlying collection seen as an instance of
. By default this is implemented as the current collection object itself, but this can be overridden. Array
Converts this mutable indexed sequence into another by copying all elements.
The collection type to build.
a new collection containing all elements of this mutable indexed sequence.
Converts this mutable indexed sequence to an array.
an array containing all elements of this mutable indexed sequence. An ClassTag
must be available for the element type of this mutable indexed sequence.
Uses the contents of this sequence to create a new mutable buffer.
a buffer containing all elements of this sequence.
A conversion from collections of type Repr
to
objects. By default this is implemented as just a cast, but this can be overridden. Array
Converts this traversable or iterator to an indexed sequence.
Note: will not terminate for infinite-sized collections.
an indexed sequence containing all elements of this traversable or iterator.
Returns this iterable collection as an iterable collection.
A new collection will not be built; lazy collections will stay lazy.
Note: will not terminate for infinite-sized collections.
an Iterable
containing all elements of this iterable collection.
Returns an Iterator over the elements in this iterable collection. Produces the same result as iterator
.
Note: will not terminate for infinite-sized collections.
an Iterator containing all elements of this iterable collection.
Converts this sequence to a list.
a list containing all elements of this sequence.
Converts this mutable indexed sequence to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.
a map of type immutable.Map[T, U]
containing all key/value pairs of type (T, U)
of this mutable indexed sequence.
Converts this sequence to a sequence.
Note: will not terminate for infinite-sized collections.
A new collection will not be built; in particular, lazy sequences will stay lazy.
a sequence containing all elements of this sequence.
Converts this traversable or iterator to a set.
Note: will not terminate for infinite-sized collections.
a set containing all elements of this traversable or iterator.
Converts this iterable collection to a stream.
a stream containing all elements of this iterable collection.
Converts this sequence to a string.
a string representation of this collection. By default this string consists of the stringPrefix
of this sequence, followed by all elements separated by commas and enclosed in parentheses.
Converts this traversable collection to an unspecified Traversable. Will return the same collection if this instance is already Traversable.
Note: will not terminate for infinite-sized collections.
a Traversable containing all elements of this traversable collection.
Converts this traversable or iterator to a Vector.
Note: will not terminate for infinite-sized collections.
a vector containing all elements of this traversable or iterator.
Transposes a two dimensional array.
Type of row elements.
A function that converts elements of this array to rows - arrays of type U
.
An array obtained by replacing elements of this arrays with rows the represent.
Produces a new sequence which contains all elements of this mutable indexed sequence and also all elements of a given sequence. xs union ys
is equivalent to xs ++ ys
.
Another way to express this is that xs union ys
computes the order-preserving multi-set union of xs
and ys
. union
is hence a counter-part of diff
and intersect
which also work on multi-sets.
the sequence to add.
a new mutable indexed sequence which contains all elements of this mutable indexed sequence followed by all elements of that
.
Converts an array of pairs into an array of first elements and an array of second elements.
the type of the first half of the element pairs
the type of the second half of the element pairs
an implicit conversion which asserts that the element type of this Array is a pair.
a class tag for T1 type parameter that is required to create an instance of Array[T1]
a class tag for T2 type parameter that is required to create an instance of Array[T2]
a pair of Arrays, containing, respectively, the first and second half of each element pair of this Array.
Converts an array of triples into three arrays, one containing the elements from each position of the triple.
the type of the first of three elements in the triple
the type of the second of three elements in the triple
the type of the third of three elements in the triple
an implicit conversion which asserts that the element type of this Array is a triple.
a class tag for T1 type parameter that is required to create an instance of Array[T1]
a class tag for T2 type parameter that is required to create an instance of Array[T2]
a class tag for T3 type parameter that is required to create an instance of Array[T3]
a triple of Arrays, containing, respectively, the first, second, and third elements from each element triple of this Array.
Replaces element at given index with a new value.
the new value.
IndexOutOfBoundsException
if the index is not valid.
A copy of this mutable indexed sequence with one single replaced element.
the position of the replacement
the replacing element
a copy of this mutable indexed sequence with the element at position index
replaced by elem
.
A sub-sequence view starting at index from
and extending up to (but not including) index until
.
The index of the first element of the slice
The index of the element following the slice
a non-strict view of a slice of this mutable indexed sequence, starting at index from
and extending up to (but not including) index until
[email protected] The difference between view
and slice
is that view
produces a view of the current sequence, whereas slice
produces a new sequence.
view(from, to) is equivalent to view.slice(from, to)
Creates a view of this iterable @see Iterable.View
a non-strict view of this mutable indexed sequence.
Creates a non-strict filter of this traversable collection.
Note: the difference between c filter p
and c withFilter p
is that the former creates a new collection, whereas the latter only restricts the domain of subsequent map
, flatMap
, foreach
, and withFilter
operations.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the predicate used to test elements.
an object of class WithFilter
, which supports map
, flatMap
, foreach
, and withFilter
operations. All these operations apply to those elements of this traversable collection which satisfy the predicate p
.
Returns a mutable indexed sequence formed from this mutable indexed sequence and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
a new mutable indexed sequence containing pairs consisting of corresponding elements of this mutable indexed sequence and that
. The length of the returned collection is the minimum of the lengths of this mutable indexed sequence and that
.
Returns a mutable indexed sequence formed from this mutable indexed sequence and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
the element to be used to fill up the result if this mutable indexed sequence is shorter than that
.
the element to be used to fill up the result if that
is shorter than this mutable indexed sequence.
a new mutable indexed sequence containing pairs consisting of corresponding elements of this mutable indexed sequence and that
. The length of the returned collection is the maximum of the lengths of this mutable indexed sequence and that
. If this mutable indexed sequence is shorter than that
, thisElem
values are used to pad the result. If that
is shorter than this mutable indexed sequence, thatElem
values are used to pad the result.
Zips this mutable indexed sequence with its indices.
A new mutable indexed sequence containing pairs consisting of all elements of this mutable indexed sequence paired with their index. Indices start at 0
.
List("a", "b", "c").zipWithIndex = List(("a", 0), ("b", 1), ("c", 2))
(ofByte: MonadOps[Byte]).filter(p)
(ofByte: MonadOps[Byte]).flatMap(f)
(ofByte: MonadOps[Byte]).map(f)
(ofByte: MonadOps[Byte]).withFilter(p)
© 2002-2019 EPFL, with contributions from Lightbend.
Licensed under the Apache License, Version 2.0.
https://www.scala-lang.org/api/2.12.9/scala/collection/mutable/ArrayOps$$ofByte.html
A subclass of
ArrayOps
for arrays containingByte
s.