Providers are responsible in Terraform for managing the lifecycle of a resource: create, read, update, delete.
Most providers require some sort of configuration to provide authentication information, endpoint URLs, etc. Where explicit configuration is required, a provider
block is used within the configuration as illustrated in the following sections.
By default, resources are matched with provider configurations by matching the start of the resource name. For example, a resource of type vsphere_virtual_machine
is associated with a provider called vsphere
.
This page assumes you're familiar with the configuration syntax already.
A provider configuration looks like the following:
provider "aws" { access_key = "foo" secret_key = "bar" region = "us-east-1" }
A provider
block represents a configuration for the provider named in its header. For example, provider "aws"
above is a configuration for the aws
provider.
Within the block body (between { }
) is configuration for the provider. The configuration is dependent on the type, and is documented for each provider.
The arguments alias
and version
, if present, are special arguments handled by Terraform Core for their respective features described above. All other arguments are defined by the provider itself.
A provider
block may be omitted if its body would be empty. Using a resource in configuration implicitly creates an empty provider configuration for it unless a provider
block is explicitly provided.
Each time a new provider is added to configuration -- either explicitly via a provider
block or by adding a resource from that provider -- it's necessary to initialize that provider before use. Initialization downloads and installs the provider's plugin and prepares it to be used.
Provider initialization is one of the actions of terraform init
. Running this command will download and initialize any providers that are not already initialized.
For more information, see the terraform init
command.
Providers are released on a separate rhythm from Terraform itself, and thus have their own version numbers. For production use, it is recommended to constrain the acceptable provider versions via configuration, to ensure that new versions with breaking changes will not be automatically installed by terraform init
in future.
When terraform init
is run without provider version constraints, it prints a suggested version constraint string for each provider:
The following providers do not have any version constraints in configuration, so the latest version was installed. To prevent automatic upgrades to new major versions that may contain breaking changes, it is recommended to add version = "..." constraints to the corresponding provider blocks in configuration, with the constraint strings suggested below. * provider.aws: version = "~> 1.0"
To constrain the provider version as suggested, add a version
argument to the provider configuration block:
provider "aws" { version = "~> 1.0" access_key = "foo" secret_key = "bar" region = "us-east-1" }
This special argument applies to all providers. terraform providers
can be used to view the specified version constraints for all providers used in the current configuration.
The version
attribute value may either be a single explicit version or a version constraint expression. Constraint expressions use the following syntax to specify a range of versions that are acceptable:
>= 1.2.0
: version 1.2.0 or newer <= 1.2.0
: version 1.2.0 or older ~> 1.2.0
: any non-beta version >= 1.2.0
and < 1.3.0
, e.g. 1.2.X
~> 1.2
: any non-beta version >= 1.2.0
and < 2.0.0
, e.g. 1.X.Y
>= 1.0.0, <= 2.0.0
: any version between 1.0.0 and 2.0.0 inclusive When terraform init
is re-run with providers already installed, it will use an already-installed provider that meets the constraints in preference to downloading a new version. To upgrade to the latest acceptable version of each provider, run terraform init -upgrade
. This command also upgrades to the latest versions of all Terraform modules.
You can define multiple configurations for the same provider in order to support multiple regions, multiple hosts, etc. The primary use case for this is using multiple cloud regions. Other use-cases include targeting multiple Docker hosts, multiple Consul hosts, etc.
To include multiple configurations for a given provider, include multiple provider
blocks with the same provider name, but set the alias
field to an instance name to use for each additional instance. For example:
# The default provider configuration provider "aws" { # ... } # Additional provider configuration for west coast region provider "aws" { alias = "west" region = "us-west-2" }
A provider
block with out alias
set is known as the default provider configuration. When alias
is set, it creates an additional provider configuration. For providers that have no required configuration arguments, the implied empty configuration is also considered to be a default provider configuration.
Resources are normally associated with the default provider configuration inferred from the resource type name. For example, a resource of type aws_instance
uses the default (un-aliased) aws
provider configuration unless otherwise stated.
The provider
argument within any resource
or data
block overrides this default behavior and allows an additional provider configuration to be selected using its alias:
resource "aws_instance" "foo" { provider = "aws.west" # ... }
The value of the provider
argument is always the provider name and an alias separated by a period, such as "aws.west"
above.
Provider configurations may also be passed from a parent module into a child module, as described in Providers within Modules.
Provider configurations may use interpolation syntax to allow dynamic configuration:
provider "aws" { region = "${var.aws_region}" }
Interpolation is supported only for the per-provider configuration arguments. It is not supported for the special alias
and version
arguments.
Although in principle it is possible to use any interpolation expression within a provider configuration argument, providers must be configurable to perform almost all operations within Terraform, and so it is not possible to use expressions whose value cannot be known until after configuration is applied, such as the id of a resource.
It is always valid to use input variables and data sources whose configurations do not in turn depend on as-yet-unknown values. Local values may also be used, but currently may cause errors when running terraform destroy
.
At present Terraform can automatically install only the providers distributed by HashiCorp. Third-party providers can be manually installed by placing their plugin executables in one of the following locations depending on the host operating system:
terraform.d/plugins
beneath your user's "Application Data" directory. .terraform.d/plugins
in your user's home directory. terraform init
will search this directory for additional plugins during plugin initialization.
The naming scheme for provider plugins is terraform-provider-NAME_vX.Y.Z
, and Terraform uses the name to understand the name and version of a particular provider binary. Third-party plugins will often be distributed with an appropriate filename already set in the distribution archive so that it can be extracted directly into the plugin directory described above.
By default, terraform init
downloads plugins into a subdirectory of the working directory so that each working directory is self-contained. As a consequence, if you have multiple configurations that use the same provider then a separate copy of its plugin will be downloaded for each configuration.
Given that provider plugins can be quite large (on the order of hundreds of megabytes), this default behavior can be inconvenient for those with slow or metered Internet connections. Therefore Terraform optionally allows the use of a local directory as a shared plugin cache, which then allows each distinct plugin binary to be downloaded only once.
To enable the plugin cache, use the plugin_cache_dir
setting in the CLI configuration file. For example:
# (Note that the CLI configuration file is _not_ the same as the .tf files # used to configure infrastructure.) plugin_cache_dir = "$HOME/.terraform.d/plugin-cache"
This directory must already exist before Terraform will cache plugins; Terraform will not create the directory itself.
Please note that on Windows it is necessary to use forward slash separators (/
) rather than the conventional backslash (\
) since the configuration file parser considers a backslash to begin an escape sequence.
Setting this in the configuration file is the recommended approach for a persistent setting. Alternatively, the TF_PLUGIN_CACHE_DIR
environment variable can be used to enable caching or to override an existing cache directory within a particular shell session:
export TF_PLUGIN_CACHE_DIR="$HOME/.terraform.d/plugin-cache"
When a plugin cache directory is enabled, the terraform init
command will still access the plugin distribution server to obtain metadata about which plugins are available, but once a suitable version has been selected it will first check to see if the selected plugin is already available in the cache directory. If so, the already-downloaded plugin binary will be used.
If the selected plugin is not already in the cache, it will be downloaded into the cache first and then copied from there into the correct location under your current working directory.
When possible, Terraform will use hardlinks or symlinks to avoid storing a separate copy of a cached plugin in multiple directories. At present, this is not supported on Windows and instead a copy is always created.
The plugin cache directory must not be the third-party plugin directory or any other directory Terraform searches for pre-installed plugins, since the cache management logic conflicts with the normal plugin discovery logic when operating on the same directory.
Please note that Terraform will never itself delete a plugin from the plugin cache once it's been placed there. Over time, as plugins are upgraded, the cache directory may grow to contain several unused versions which must be manually deleted.
© 2018 HashiCorpLicensed under the MPL 2.0 License.
https://www.terraform.io/docs/configuration/providers.html