W3cubDocs

/Angular 11

Testing Utility APIs

This page describes the most useful Angular testing features.

The Angular testing utilities include the TestBed, the ComponentFixture, and a handful of functions that control the test environment. The TestBed and ComponentFixture classes are covered separately.

Here's a summary of the stand-alone functions, in order of likely utility:

Function Description
waitForAsync

Runs the body of a test (it) or setup (beforeEach) function within a special async test zone. See discussion above.

fakeAsync

Runs the body of a test (it) within a special fakeAsync test zone, enabling a linear control flow coding style. See discussion above.

tick

Simulates the passage of time and the completion of pending asynchronous activities by flushing both timer and micro-task queues within the fakeAsync test zone.

The curious, dedicated reader might enjoy this lengthy blog post, "Tasks, microtasks, queues and schedules".

Accepts an optional argument that moves the virtual clock forward by the specified number of milliseconds, clearing asynchronous activities scheduled within that timeframe. See discussion above.

inject

Injects one or more services from the current TestBed injector into a test function. It cannot inject a service provided by the component itself. See discussion of the debugElement.injector.

discardPeriodicTasks

When a fakeAsync() test ends with pending timer event tasks (queued setTimeOut and setInterval callbacks), the test fails with a clear error message.

In general, a test should end with no queued tasks. When pending timer tasks are expected, call discardPeriodicTasks to flush the task queue and avoid the error.

flushMicrotasks

When a fakeAsync() test ends with pending micro-tasks such as unresolved promises, the test fails with a clear error message.

In general, a test should wait for micro-tasks to finish. When pending microtasks are expected, call flushMicrotasks to flush the micro-task queue and avoid the error.

ComponentFixtureAutoDetect

A provider token for a service that turns on automatic change detection.

getTestBed

Gets the current instance of the TestBed. Usually unnecessary because the static class methods of the TestBed class are typically sufficient. The TestBed instance exposes a few rarely used members that are not available as static methods.

TestBed class summary

The TestBed class is one of the principal Angular testing utilities. Its API is quite large and can be overwhelming until you've explored it, a little at a time. Read the early part of this guide first to get the basics before trying to absorb the full API.

The module definition passed to configureTestingModule is a subset of the @NgModule metadata properties.

type TestModuleMetadata = {
    providers?: any[];
    declarations?: any[];
    imports?: any[];
    schemas?: Array<SchemaMetadata | any[]>;
  };

Each override method takes a MetadataOverride<T> where T is the kind of metadata appropriate to the method, that is, the parameter of an @NgModule, @Component, @Directive, or @Pipe.

type MetadataOverride<T> = {
    add?: Partial<T>;
    remove?: Partial<T>;
    set?: Partial<T>;
  };

The TestBed API consists of static class methods that either update or reference a global instance of the TestBed.

Internally, all static methods cover methods of the current runtime TestBed instance, which is also returned by the getTestBed() function.

Call TestBed methods within a beforeEach() to ensure a fresh start before each individual test.

Here are the most important static methods, in order of likely utility.

Methods Description
configureTestingModule

The testing shims (karma-test-shim, browser-test-shim) establish the initial test environment and a default testing module. The default testing module is configured with basic declaratives and some Angular service substitutes that every tester needs.

Call configureTestingModule to refine the testing module configuration for a particular set of tests by adding and removing imports, declarations (of components, directives, and pipes), and providers.

compileComponents

Compile the testing module asynchronously after you've finished configuring it. You must call this method if any of the testing module components have a templateUrl or styleUrls because fetching component template and style files is necessarily asynchronous. See above.

After calling compileComponents, the TestBed configuration is frozen for the duration of the current spec.

createComponent

Create an instance of a component of type T based on the current TestBed configuration. After calling compileComponent, the TestBed configuration is frozen for the duration of the current spec.

overrideModule

Replace metadata for the given NgModule. Recall that modules can import other modules. The overrideModule method can reach deeply into the current testing module to modify one of these inner modules.

overrideComponent

Replace metadata for the given component class, which could be nested deeply within an inner module.

overrideDirective

Replace metadata for the given directive class, which could be nested deeply within an inner module.

overridePipe

Replace metadata for the given pipe class, which could be nested deeply within an inner module.

inject

Retrieve a service from the current TestBed injector.

The inject function is often adequate for this purpose. But inject throws an error if it can't provide the service.

What if the service is optional?

The TestBed.inject() method takes an optional second parameter, the object to return if Angular can't find the provider (null in this example):

service = TestBed.inject(NotProvided, null); // service is null

After calling TestBed.inject, the TestBed configuration is frozen for the duration of the current spec.

initTestEnvironment

Initialize the testing environment for the entire test run.

The testing shims (karma-test-shim, browser-test-shim) call it for you so there is rarely a reason for you to call it yourself.

You may call this method exactly once. If you must change this default in the middle of your test run, call resetTestEnvironment first.

Specify the Angular compiler factory, a PlatformRef, and a default Angular testing module. Alternatives for non-browser platforms are available in the general form @angular/platform-<platform_name>/testing/<platform_name>.

resetTestEnvironment

Reset the initial test environment, including the default testing module.

A few of the TestBed instance methods are not covered by static TestBed class methods. These are rarely needed.

The ComponentFixture

The TestBed.createComponent<T> creates an instance of the component T and returns a strongly typed ComponentFixture for that component.

The ComponentFixture properties and methods provide access to the component, its DOM representation, and aspects of its Angular environment.

ComponentFixture properties

Here are the most important properties for testers, in order of likely utility.

Properties Description
componentInstance

The instance of the component class created by TestBed.createComponent.

debugElement

The DebugElement associated with the root element of the component.

The debugElement provides insight into the component and its DOM element during test and debugging. It's a critical property for testers. The most interesting members are covered below.

nativeElement

The native DOM element at the root of the component.

changeDetectorRef

The ChangeDetectorRef for the component.

The ChangeDetectorRef is most valuable when testing a component that has the ChangeDetectionStrategy.OnPush method or the component's change detection is under your programmatic control.

ComponentFixture methods

The fixture methods cause Angular to perform certain tasks on the component tree. Call these method to trigger Angular behavior in response to simulated user action.

Here are the most useful methods for testers.

Methods Description
detectChanges

Trigger a change detection cycle for the component.

Call it to initialize the component (it calls ngOnInit) and after your test code, change the component's data bound property values. Angular can't see that you've changed personComponent.name and won't update the name binding until you call detectChanges.

Runs checkNoChanges afterwards to confirm that there are no circular updates unless called as detectChanges(false);

autoDetectChanges

Set this to true when you want the fixture to detect changes automatically.

When autodetect is true, the test fixture calls detectChanges immediately after creating the component. Then it listens for pertinent zone events and calls detectChanges accordingly. When your test code modifies component property values directly, you probably still have to call fixture.detectChanges to trigger data binding updates.

The default is false. Testers who prefer fine control over test behavior tend to keep it false.

checkNoChanges

Do a change detection run to make sure there are no pending changes. Throws an exceptions if there are.

isStable

If the fixture is currently stable, returns true. If there are async tasks that have not completed, returns false.

whenStable

Returns a promise that resolves when the fixture is stable.

To resume testing after completion of asynchronous activity or asynchronous change detection, hook that promise. See above.

destroy

Trigger component destruction.

DebugElement

The DebugElement provides crucial insights into the component's DOM representation.

From the test root component's DebugElement returned by fixture.debugElement, you can walk (and query) the fixture's entire element and component subtrees.

Here are the most useful DebugElement members for testers, in approximate order of utility:

Member Description
nativeElement

The corresponding DOM element in the browser (null for WebWorkers).

query

Calling query(predicate: Predicate<DebugElement>) returns the first DebugElement that matches the predicate at any depth in the subtree.

queryAll

Calling queryAll(predicate: Predicate<DebugElement>) returns all DebugElements that matches the predicate at any depth in subtree.

injector

The host dependency injector. For example, the root element's component instance injector.

componentInstance

The element's own component instance, if it has one.

context

An object that provides parent context for this element. Often an ancestor component instance that governs this element.

When an element is repeated within *ngFor, the context is an NgForRow whose $implicit property is the value of the row instance value. For example, the hero in *ngFor="let hero of heroes".

children

The immediate DebugElement children. Walk the tree by descending through children.

DebugElement also has childNodes, a list of DebugNode objects. DebugElement derives from DebugNode objects and there are often more nodes than elements. Testers can usually ignore plain nodes.

parent

The DebugElement parent. Null if this is the root element.

name

The element tag name, if it is an element.

triggerEventHandler

Triggers the event by its name if there is a corresponding listener in the element's listeners collection. The second parameter is the event object expected by the handler. See above.

If the event lacks a listener or there's some other problem, consider calling nativeElement.dispatchEvent(eventObject).

listeners

The callbacks attached to the component's @Output properties and/or the element's event properties.

providerTokens

This component's injector lookup tokens. Includes the component itself plus the tokens that the component lists in its providers metadata.

source

Where to find this element in the source component template.

references

Dictionary of objects associated with template local variables (e.g. #foo), keyed by the local variable name.

The DebugElement.query(predicate) and DebugElement.queryAll(predicate) methods take a predicate that filters the source element's subtree for matching DebugElement.

The predicate is any method that takes a DebugElement and returns a truthy value. The following example finds all DebugElements with a reference to a template local variable named "content":

// Filter for DebugElements with a #content reference
const contentRefs = el.queryAll( de => de.references.content);

The Angular By class has three static methods for common predicates:

  • By.all - return all elements.
  • By.css(selector) - return elements with matching CSS selectors.
  • By.directive(directive) - return elements that Angular matched to an instance of the directive class.
// Can find DebugElement either by css selector or by directive
const h2 = fixture.debugElement.query(By.css('h2'));
const directive = fixture.debugElement.query(By.directive(HighlightDirective));

© 2010–2021 Google, Inc.
Licensed under the Creative Commons Attribution License 4.0.
https://v11.angular.io/guide/testing-utility-apis