fortinet.fortios.fortios_router_multicast – Configure router multicast in Fortinet’s FortiOS and FortiGate.

• Synopsis
• Requirements
• Parameters
• Notes
• Examples
• Return Values

Synopsis

• This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify router feature and multicast category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

• ansible>=2.9.0

Parameters

Notes

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure router multicast.
    fortios_router_multicast:
      vdom:  "{{ vdom }}"
      router_multicast:
        interface:
         -
            bfd: "enable"
            cisco_exclude_genid: "enable"
            dr_priority: "6"
            hello_holdtime: "7"
            hello_interval: "8"
            igmp:
                access_group: "<your_own_value> (source router.access-list.name)"
                immediate_leave_group: "<your_own_value> (source router.access-list.name)"
                last_member_query_count: "12"
                last_member_query_interval: "13"
                query_interval: "14"
                query_max_response_time: "15"
                query_timeout: "16"
                router_alert_check: "enable"
                version: "3"
            join_group:
             -
                address: "<your_own_value>"
            multicast_flow: "<your_own_value> (source router.multicast-flow.name)"
            name: "default_name_22 (source system.interface.name)"
            neighbour_filter: "<your_own_value> (source router.access-list.name)"
            passive: "enable"
            pim_mode: "sparse-mode"
            propagation_delay: "26"
            rp_candidate: "enable"
            rp_candidate_group: "<your_own_value> (source router.access-list.name)"
            rp_candidate_interval: "29"
            rp_candidate_priority: "30"
            state_refresh_interval: "31"
            static_group: "<your_own_value> (source router.multicast-flow.name)"
            ttl_threshold: "33"
        multicast_routing: "enable"
        pim_sm_global:
            accept_register_list: "<your_own_value> (source router.access-list.name)"
            accept_source_list: "<your_own_value> (source router.access-list.name)"
            bsr_allow_quick_refresh: "enable"
            bsr_candidate: "enable"
            bsr_hash: "40"
            bsr_interface: "<your_own_value> (source system.interface.name)"
            bsr_priority: "42"
            cisco_crp_prefix: "enable"
            cisco_ignore_rp_set_priority: "enable"
            cisco_register_checksum: "enable"
            cisco_register_checksum_group: "<your_own_value> (source router.access-list.name)"
            join_prune_holdtime: "47"
            message_interval: "48"
            null_register_retries: "49"
            register_rate_limit: "50"
            register_rp_reachability: "enable"
            register_source: "disable"
            register_source_interface: "<your_own_value> (source system.interface.name)"
            register_source_ip: "<your_own_value>"
            register_supression: "55"
            rp_address:
             -
                group: "<your_own_value> (source router.access-list.name)"
                id:  "58"
                ip_address: "<your_own_value>"
            rp_register_keepalive: "60"
            spt_threshold: "enable"
            spt_threshold_group: "<your_own_value> (source router.access-list.name)"
            ssm: "enable"
            ssm_range: "<your_own_value> (source router.access-list.name)"
        route_limit: "65"
        route_threshold: "66"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Authors

• Link Zheng (@chillancezen)
• Hongbin Lu (@fgtdev-hblu)
• Frank Shen (@frankshen01)
• Jie Xue (@JieX19)
• Miguel Angel Munoz (@mamunozgonzalez)
• Nicolas Thomas (@thomnico)